Brochure
416 70-6910
Modutrol IV Motors
M6184; M6194 Floating Modutrol IV™ Motors
Series 61 Modutrol IV™ Motors non-spring return oating control
motors are used with controllers that provide a switched SPDT or
oating output to operate dampers or valves.
• Integral junction box provides NEMA 3 weather protection if motor is
mounted in the upright position
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard – screw terminal adapter is
available
• Adapter bracket for matching shaft height of older motors is available
• Motors have eld adjustable stroke (90 to 160 degrees)
• Integral auxiliary switches are available factory mounted, or can be
eld added
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
• Motors are designed for either normally open or normally closed
valves and dampers
Application: Electric
Control Signal: Floating
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Non-Spring Return
Auxiliary Switch Ratings: AFL - 120 Vac – 7.2A; ALR - 120 Vac –
43.2A; AFL - 240 Vac – 3.6A; ALR - 240 Vac – 21.6A
External Auxiliary Switches Available: Ye s
Shaft Rotation (upon control signal increase): Dependent on wiring
(normally closed)
Electrical Connections: Quick-connect terminals
Mounting: Foot-mounted
Power Consumption: Driving – 15 VA
Feedback: No
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End – 200 lbs.; Combined on both
Shafts – 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436,
Guide No. XAPX for USA and Canada
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity)
73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Accessories:
220736A/U – Internal Auxiliary Switch Assembly - 1 Switch
220736B/U – Internal Auxiliary Switch Assembly - 2 Switches
220738A/U – Adapter Bracket. Adjusts shaft height to match Modutrol
III motors
220741A2-61/U – Screw Terminal Adapter Series 61 MOD IV Motor
221455A/U – Innitely adjustable Motor Crank Arm
4074ERU/U – Weatherproong kit. Protects motor from driving rain
when mounted in any position. Not needed if motor is mounted
upright.
50017460-001/U – 24/120/230 Vac Internal Transformers for Series 2
Motors
50017460-003/U – 120 Vac Internal Transformers for Series 2 Motors
Material
Number
Torque
Rating
(lb-in.)
Torque
Rating
(Nm)
Supply
Voltage
Timing,
Nominal
Internal
Auxiliary
Switch
Factory
Stroke
Setting
Stroke Internal
Transformer
Weight Includes Comments Tradeline
Value
M6184A1015/U 150 lb-in. 17 Nm 24V 30 - 60 sec 0 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb
M6184A1023/U 75 lb-in. 8.5 Nm 120V 15 - 30 sec 0 160 degrees Adjustable; 90
to 160 degrees,
Asymmetrical
50004263-003 7.5 lb Transformer
M6184D1001/U 75 lb-in. 8.5 Nm 24V 15 - 30 sec 0 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb
M6184D1035/U 150 lb-in. 17 Nm 24V 30 - 60 sec 0 160 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb Tradeline
M6184D1068/U 150 lb-in. 17 Nm 24V 120 - 240 sec 0 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb Contains
on-off pulsing
circuitry to
achieve timing.
M6184F1014/U 150 lb-in. 17 Nm 24V 30 - 60 sec 2 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb
M6194A1005/U 300 lb-in. 34 Nm 120V 120 - 240 sec 0 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
50004263-003 7.5 lb Transformer
M6194B1011/U 300 lb-in. 34 Nm 24V 60 - 120 sec 1 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb
M6194B1029/U 300 lb-in. 34 Nm 120V 120 - 240 sec 1 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
50004263-003 7.5 lb Transformer Minimum
10° fixed
differential
M6194D1017/U 300 lb-in. 34 Nm 24V 120 - 240 sec 0 160 degrees Adjustable; 90
to 160 degrees,
Symmetrical
None 6.5 lb Tradeline