Brochure

CS/CSP/MCS SERIES CURRENT SWITCHES
Model Number Trip Point Core Type Max. Current Application
MCS-NO-A-50A Adjustable, 0.7550FLA MicroSolid 50A Standard
CS-NO-F-50A Fixed, 0.25A Solid 50A Standard
CS-NO-A-50A Adjustable, 0.7550FLA
Solid
50A Standard
CSP-NO-A-50A Adjustable, 0.4550FLA Split 50A Standard
CSP-NO-A-100A Adjustable, 0.50100FLA Split 100A Standard
CSP-NO-A-150A Adjustable, 0.50150FLA Split 135A Standard
CSP-NO-F-200A Fixed, 0.35A Split 200A Standard
CSP-NO-AVFD-150A Automatically detected above 40 Hz Split 135A VFD Controlled Motor
CSP-NO-AECM-200A Adjustable, 0.253A Trip Split 200A ECM - Electronically Commutated Motor
Bring reliability, accuracy and savings to your business
and buildings with Honeywell current switching solutions.
With simplified installation, you’ll find both cost and
time savings packed into these compact switches. Once
installed, you can rest easy. They’ll let you know when
there’s an issue needing your attention.
CURRENT SWITCHES: MCS, CS & CSP
ACCURATE MONITORING OF
HVAC DRIVES
CSP SERIES
• Prior to installation, the current threshold
is preset thereby allowing the installer to
avoid electrical hazards when adjusting in
presence of line voltage
• Lowest installed cost
• No need to return to job site to calibrate
• Save approximately 30 minutes time for
each sensor install
• Split core; fixed and adjustable trip points
• Optional command relay
CS SERIES
• Same benefits as CSP current switch with a
more-compact package
• Low amperage detection
• Solid core; fixed and adjustable trip points
MCS SERIES
(MINI-ADJUSTABLE)
• Ultra small, fits almost anywhere
• Low amperage detection
• Solid core; adjustable
MCS-NO-A-50A
CSP-NO-A-100A
CS-NO-A-50A
APPLICATIONS
• Detecting mechanical failure on fans
and pumps
• Monitoring status of industrial
processes and critical motors
2 CS, CSP, CTP, CR Current Sensors, Transmitters, and Relays | www.buildingcontrols.honeywell.com