Portable Air Conditioner User Manual Email: usinfo@jmatek.com Web: www.jmatek.
SAFETY READ AND SAVE THESE INSTRUCTIONS IMPROPER HANDLING CAN CAUSE SERIOUS DAMAGE TO PEOPLE AND TO THE APPLIANCE. IN CASE THERE IS ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL PREVAIL. WARNING: • DO NOT operate the unit with a damaged plug or loose wall outlet. If the power cord is damaged, it must be replaced by the manufacturer or an authorized service agent.
SAFETY • This household appliance has been manufactured for use in domestic environments and should not be used for other purposes. • Only use the installation kit provided to install this unit. DO NOT attempt to extend the exhaust hose or install this unit using other methods other than that provided in this manual. Improper installation could void any existing warranties. Contact Customer Support for assistance if required. • DO NOT use an extension cord with this unit.
THANK YOU Congratulations on your purchase of this versatile Honeywell Portable Air Conditioner. USER TIPS Honeywell Portable Air Conditioners are ideal for spot cooling. The compressor, condenser and evaporator are housed in a compact unit. The air is filtered, dehumidified and cooled while a flexible air outlet hose sends heat outside. The air conditioner includes a window venting kit. No permanent installation is needed.
PARTS DESCRIPTION 3 2 7 6 1 8 5 9 10 4 1) Control Panel 7) Exhaust Hose Connector 8) Power Supply Cord (Incl.
INSTALLATION It is important that the installation instructions below are followed for successful installation of this portable air conditioner. Please call Customer Support if you have any difficulties or queries regarding these installation procedures. Installation Kit: 1. 2. 3. 4. 5. 1 2 Window Bracket Kit............................. 1 Set Window Bracket Panel Adapter........... 1 Piece Plastic Pin............................................ 2 Pieces Hose Connector..................................
INSTALLATION (CONTINUED) IMPORTANT: • Do not replace or lengthen the exhaust hose as this could cause the unit to malfunction. NOT RECOMMENDED MIN. 36 cm / 14” MAX. 102 cm / 40” 50 cm / 20” RECOMMENDED WARNING: Any warranties included with this product will be voided if an extra extension hose is added to the originally provided installation kit or if the installation is performed differently than the manufacturer's instructions, without proper consultation.
USE & OPERATION (CONTINUED) FUNCTION BUTTONS (CONTINUED) POWER CONTROL MODE CONTROL The Power Control turns the unit on and off. When switched on the unit will start on Auto mode. 3 settings: Cool, Dehumidify, Fan. The corresponding indicator light will illuminate to indicate the current mode setting. WARNING LIGHT Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning Light will red and the unit will not operate until the unit has been drained.
USE & OPERATION (CONTINUED) REMOTE CONTROL The functions work the same as the portable air conditioner's Touch Screen Control Panel. All key functions can be accessed from the remote control. Power Control Temperature / Timer Set ON / OFF • Used for adjusting the timer and temperature. • When ▼ or ▲ key is pressed in cool mode, the set temperature is displayed and may be adjusted. • Timer setting is available from 1-24 hours by pressing the key ▼ or ▲.
CLEANING & MAINTENANCE Appliance Maintenance: 1. Turn off the appliance before disconnecting the power supply. 2. Only clean the appliance with a soft dry cloth. Air Filter Maintenance: The air filter is to be cleaned every two weeks to maintain a cleaner environment and air cooling efficiency. Please follow the below instructions for cleaning the air filters: 1. Turn off the appliance and remove the air filter. 2. Rinse it in lukewarm water. After cleaning, dry in a shaded and cool place, then reinstall.
WATER CONDENSATION DRAINAGE WATER CONDENSATION DRAINAGE When there is excess water condensation inside the unit, the air conditioner stops running and shows a warning light (the Power Control button flashes with a red light). This warning light indicates that the water condensation needs to be drained using the following procedures: (warning light refer for to diagram below) Manual Draining AC & Dehumidifier Mode Water may need to be drained in high humidity areas. 1. Unplug the unit from power source. 2.
TROUBLESHOOTING GUIDE The following troubleshooting guide addresses the most common problems. If problems persist, call customer service. Unplug and disconnect the appliance from the power source before attempting to troubleshoot. PROBLEM The air conditioning unit does not start Runs only a short while POSSIBLE CAUSE SOLUTION • No electricity. • Batteries in the remote control need to be replaced. • The power cord is not properly plugged in.
JMATEK North America LLC Mahwah, New Jersey 07495 USA Email: usinfo@jmatek.com Web: www.jmatek.com Made in China © 2016 JMATEK Limited. All rights reserved. The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. This product is manufactured by Airtek Int'l Corp. Ltd. (subsidiary of JMATEK Ltd.).
