Manualshelf

Instruction Manual

ManualsBrandsHoneywell ManualsOtherHoneywell Miller H700 Full Body Harness Industry Comfort
1234
INSTRUCTION FOR USE
ONE-PULL SUSPENSION TRAUMA RELIEF STEPS
Description: The Honeywell Miller ONE-PULL Suspension Trauma Relief Steps are directly positioned on each side of the H700 full body
harness. They provide instant support and enhance blood circulation by allowing users to quickly stand up in their harness and relieve
the pressure being applied to the arteries and veins around the top of the legs.
Training: It is essential that the users of this equipment receive proper training, including detailed procedures for the safe use of such
equipment in their work application.
Rescue: This equipment provides suspension relief and is not a rescue alternative. The user shall have a rescue plan and the means at
hand to implement it.
Inspection: Include the relief steps during the daily harness inspection before use. Check for damage, wear, fraying, cuts, abrasion,
burns and knots. When inspection reveals defects in or damage to this equipment, the equipment shall be tagged as “unusable”,
removed from service and immediately discarded.
Warning: While using this equipment after a fall arrest, remain vertical. Do not attempt to lie down. All persons using this equipment
must read, understand, and follow the instruction. Failure to do so may result in serious injury or death.
Presetting: It is highly recommended to adjust the length of the trauma relief steps for yourself in advance.
PRE-SETTING:
Figure 1
Step 1
Standing on the ground, pull down
the bottom tags of both trauma relief
steps to deploy webbing and steps.
Figure 2
Figure 3
Step 3
Make sure both
steps are on the top
of your shoes.
Step 2
Press the adjustment buckle to
adjust the total length on both
steps.
REPACKING:
Figure 4
After presetting, repack and insert
the 2 relief trauma steps back into
the casing and fasten the button.
OPERATION:
Figure 5
Figure 6
Figure 7
Step 1
Pull both bottom tags down and
deploy the trauma relief steps on
each side.
Stand up in your harness and start
motioning your legs. This will relieve the
pressure being applied to the arteries
and veins around the top of your legs.
Step 2
Insert feet into the trauma relief steps. (See Figure 7)
*If presetting has not been done before, press the buckle
to adjust suitable length for both sides.
Scan to learn
more about
H700 harness

Summary of content (4 pages)