Installation Manual

Honeywell
MK XXII EGPWS Installation Manual
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C
SHEET
40
STEP 4 Install item 1.3 (Backshell Housing) onto connector using item 1.8 (Screws) as shown in
figure 2-1.4 below:
Ground Wire (used for electrostatic discharge {ESD} protection) is terminated with
shielded pigtails of wires at this connector.
FIGURE 2-1.4 MK XXII EGPWS CONFIGURATION MODULE