Submittal Sheet

MP909E and H Pneumatic

Damper Actuators

77-9030-1

SPECIFICATION DATA

GENERAL

The MP909E and H Pneumatic Damper Actuators control

dampers, variable volume terminal units, and mixing boxes.

The MP909H is an MP909E with a positive positioner.

FEATURES

• Low friction shaft bearing

• Close tolerance on operating range and stroke

• Versatile mounting and connecting hardware

• Cost efficient mounting to Honeywell dampers

• Nonoverlapping spring ranges for sequencing

• Corrosion resistant materials

• Reliable—long life

• Models available for use with UL classified leakage

rated (smoke) dampers

PAGE 1
MP909E and H Pneumatic Damper Actuators SPECIFICATION DATA FEATURES • • • • • • • • Low friction shaft bearing Close tolerance on operating range and stroke Versatile mounting and connecting hardware Cost efficient mounting to Honeywell dampers Nonoverlapping spring ranges for sequencing Corrosion resistant materials Reliable—long life Models available for use with UL classified leakage rated (smoke) dampers GENERAL The MP909E and H Pneumatic Damper Actuators control dampers, variable volume terminal uni
PAGE 2
MP909E AND H PNEUMATIC DAMPER ACTUATORS SPECIFICATIONS Startpoint Pressure (MP909H): Adjustable 1.5 to 13 psi (10.
PAGE 3
MP909E AND H PNEUMATIC DAMPER ACTUATORS Dimensions: MP909H N.C. 9-1/2 (240) MP909E N.C. MP909H 7 N.C. (180) 9-1/2 (240) N.O.
PAGE 4
MP909E AND H PNEUMATIC DAMPER ACTUATORS Damper Load Rating (See Following Table): Damper load ratings for Honeywell Moduflow Dampers (non-UL Listed models) are calculated by multiplying the B dimension of each section by the number of sections required. Approvals: MP918B (all models): UL Recognized Component, Category EMKU2, File No.