User manual

10 - 13
Code 93 Append On C93APP1 6-10
*Off C93APP0 6-10
Code 93 Code Page Code 93 Code Page C93DCP 6-11
Straight 2 of 5 Industrial Default All Straight 2 of 5 Industrial Settings R25DFT 6-11
*Off R25ENA0 6-11
On R25ENA1 6-11
Straight 2 of 5 Industrial Message
Length
Minimum (1 - 48) *4 R25MIN## 6-11
Maximum (1 - 48) *48 R25MAX## 6-11
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
Settings
A25DFT 6-12
Straight 2 of 5 IATA *Off A25ENA0 6-12
On A25ENA1 6-12
Straight 2 of 5 IATA Message Length Minimum (1 - 48) *4 A25MIN## 6-12
Maximum (1 - 48) *48 A25MAX## 6-12
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 6-13
*Off X25ENA0 6-13
On X25ENA1 6-13
Matrix 2 of 5 Message Length Minimum (1 - 80) *4 X25MIN## 6-13
Maximum (1 - 80) *80 X25MAX## 6-13
Code 11 Default All Code 11
Settings
C11DFT 6-14
*Off C11ENA0 6-14
On C11ENA1 6-14
Code 11 Check Digits Required 1 Check Digit C11CK20 6-14
*2 Check Digits C11CK21 6-14
Code 11 Message Length Minimum (1 - 80) *4 C11MIN## 6-14
Maximum (1 - 80) *80 C11MAX## 6-14
Code 128 Default All Code 128
Settings
128DFT 6-15
Off 128ENA0 6-15
*On 128ENA1 6-15
ISBT Concatenation *Off ISBENA0 6-15
On ISBENA1 6-15
Code 128 Message Length Minimum (0 - 80) *0 128MIN## 6-15
Maximum (0 - 80) *80 128MAX## 6-15
Code 128 Append *On 128APP1 6-15
Off 128APP0 6-16
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 6-16
GS1-128 Default All GS1-128 Settings GS1DFT 6-17
*On GS1ENA1 6-17
Off GS1ENA0 6-17
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 6-17
Maximum (0 - 80) *80 GS1MAX## 6-17
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page