User manual

6 - 21
UPC Short Quiet Zone
When enabled, it can decode labels which have one quiet zone or both quiet zones to be shorter than the ones recom-
mended by the specification. Default = Enabled on One Side.
Note: Enabling the Short Quiet Zone on both sides may impact decode time.
UPC-A/EAN-13 with Extended Coupon Code
Use the following codes to enable or disable UPC-A and EAN-13 with Extended Coupon Code. When left on the default setting
(Off), the scanner treats Coupon Codes and Extended Coupon Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the coupon code and the extended coupon code in a single
scan, it transmits both as one symbology. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read the coupon code and extended coupon code in a
single read to transmit the data. No data is output unless both codes are read. Default = Off.
Coupon GS1 DataBar Output
If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the GS1
DataBar code. Scan the GS1 Output On code below to scan and output only the GS1 DataBar code data. Default = GS1 Out-
put Off.
Disabled
* Enabled on One Side
Enabled on Both Sides
* Off
Allow Concatenation
Require Concatenation
* GS1 Output Off