User Manual
Table Of Contents
- PD45
- Customer Support
- About the Printers
- Set Up the Printer
- Connect the Printer
- Configure the Printer
- Troubleshooting
- Maintenance
- Product Specifications
- Default Settings
- Print Labels with INPrint
- Accessories and Options
18 PD45S User Guide
3. Turn the printhead lift lever clockwise to close the printhead, lower the front
arm and click into place, and lift the rewinder batch plate into place.
4. Go to Main Menu > Setting > Printing > Media > Printing Mode, select
Rewind from the list.
Note: Honeywell recommends using non-perforated labels when using rewinder mode.
Loading with the Cutter
Follow the steps 1-9 for tear off printing, then:
1. Load media onto supply hub
2. Ensure the media lever is in the upright position and the screw is tightened.