User Manual

60 PD45 User Guide
Sensor Calibration
If your printer has the optional sensor or the label dispenser (which includes the
sensor), use the wizard to calibrate the sensor for your media.
Note: For best results, calibrate the sensor each time you load media or move the printer to
a different environment. If you installed the sensor module or the label dispenser in
the printer, calibrate the sensor before you begin printing.
Before you calibrate the sensor, load media and ribbon in the printer as necessary.
1. In the Main Menu, select Wizards > Calibration > Sensor.
2. Follow the prompts to calibrate the sensor.
Label Gap and Black Mark Sensor Adjustments
The label gap sensor is a transmissive sensor that controls how the printer feeds
media by detecting gaps between the labels. The black mark sensor is a reflective
sensor that detects black marks on continuous media.
Sensor Overview
The sensor contains a blue LED that is strong enough to see through media. You
can use the blue LED to help determine the proper location for the sensor.
1. Open the media cover.
2. Adjust the label gap and black mark sensor:
• Push the sensor adjustment knob to move the sensor toward the outside of
the printer.
• Push the sensor adjustment knob to move the sensor toward the inside of
the printer.