User Manual

PM45 and PM45c Accessory User Guide 37
External Error Port
External Error Port Pinouts
Applicator Signals
The diagrams below show how applicator signals function in each applicator mode
during the stages of printing labels.
5 +24VDC Input +24VDC input for distribution through Applicator Port connector
(Z-Style pin 7, S-Style pin 12)
6 Power
ground
Input Power return for input (Z-Style pin 8, S-Style pin 2)
Pin Signal Type Description
Pin Signal Type Description
1 AppErr_1 Input
Applicator error #1,
reserved for external applicator
device to signal error for printer to receive status of
applicator.
2 AppErr_2 Input
Applicator error #2,
reserved for external applicator
device to signal error for printer to receive status of
applicator.
3 AppErr_3 Input
Applicator error #3,
reserved for external applicator
device to signal error for printer to receive status of
applicator.
4 RtW_in_Ext Input External input signal from the applicator to the printer, for
the printer to switch to the same state with the applicator,
and behave in sync as part of the entire system.
5 +5VDC Output Available for applicator.
6 RtW_Out Output External output signal indicating the printer is Ready to
Work.
Signal may be asserted LOW when there are no active
events in the System Health Monitor (SHM), when the
printer motor is idle, or both.
7 Ground Ground Available for applicator.
8 Ground Ground Available for applicator.