User Manual
Table Of Contents
- PM45 and PM45c Interface Boards and Accessories
- Customer Support
- Introduction
- Installing Interface Boards
- Industrial Interface Board
- IEEE 1284 Parallel Board
- RFID Interface Board
- Applicator Interface Board
- Printer Firmware
- Out of the Box
- Installing the Applicator Interface Board
- Interfacing
- Applicator Signals
- Configuring Applicator Port Settings
- About Applicator Input Signals
- About Applicator OUT Signals
- Programming Applications for the printer
- Fingerprint Commands for the printer
- Using External Applicator Signals
- Error Messages
- Display Messages
- Wi-Fi/Bluetooth Interface Board
- Installing Accessories
- Wall Mounting Template
16 PM45 and PM45c Accessory User Guide
Simplified schematics of a digital IN port:
Digital Opto Out
The current to each optocoupler of the digital OUT ports can be turned on and off
using PORTOUT ON/OFF statements. The status of the ports can be read using
PORTIN functions. If a current is led through the optocoupler of the port. PORTIN
returns the value -1 (true), else it returns the value 0 (false).
Connector Configuration:
Signal Description Max
Vceo Collector - emitter Breakdown Voltage 35V
Veco Emitter - collector breakdown voltage 6V
Ic Collector current (non-saturation) 30mA
Pin of DSUB 44
Signal
Name
Description
Fingerprint
Ref. No.
20 OUT_1C Collector Opto Out Channel 1 221
5 OUT_1E Emitter Opto Out Channel 1
35 OUT_2C Collector Opto Out Channel 2 222
21 OUT_2E Emitter Opto Out Channel 2
6 OUT_3C Collector Opto Out Channel 3 223
36 OUT_3E Emitter Opto Out Channel 3
22 OUT_4C Collector Opto Out Channel 4 224
7 OUT_4E Emitter Opto Out Channel 4
37 OUT_5C Collector Opto Out Channel 5 225
23 OUT_5E Emitter Opto Out Channel 5
8 OUT_6C Collector Opto Out Channel 6 226
38 OUT_6E Emitter Opto Out Channel 6
24 OUT_7C Collector Opto Out Channel 7 227
9 OUT_7E Emitter Opto Out Channel 7
39 OUT_8C Collector Opto Out Channel 8 228
25 OUT_8E Emitter Opto Out Channel 8