User Guide

PRO 2000 Series
Programmable
Thermostat
Product
Information
Need Help?
For assistance please visit http://honeywellhome.com/support
Product Manuals
Search online for 69-2799EFS for the Owner’s Guide.
33-00310EFS-05
Quick reference to controls
Select the system and fan setting
Battery replacement
To adjust program schedules
Quick reference to display screen
Set the time and day
System Switch
M34678
Fan
Auto
On
Off
Cool
Heat
Set
Hold
Run
E.M. Heat
Screen Lit for 12 seconds when you press any button.
Fan Switch
On: Fan runs continuously.
Auto: Fan runs only when
heating or cooling system is on.
Set: Press to set
time/day/schedule.
Hold: Press to
override programmed
temperature control.
Run: Press to resume
program schedule.
Temperature
adjustment
• Cool: Cooling system control.
• Off: All systems off.
• Heat: Heating system control.
• Em Heat: Emergency & Auxiliary
Heat control. Compressor is
locked out. (Select models only.)
Temporary
WE
Lo
Batt
Wake
Set Schedule
Set
am
Heat
75
On
6
:
30
Low battery warning
Setpoint indicator
Appears when the
setpoint temperature is
displayed.
Temperature
The ambient (measured)
temperature is normally displayed.
To view the setpoint temperature,
press the Up or Down button once.
The setpoint temperature will
appear for five seconds.
System status
Cool On: Cooling system is on.
Heat On: Heating system is on.
Aux On: Auxiliary heat is on. (Only
for heat pumps with this capability
[select models only].)
When Heat On or Cool On is
flashing, compressor protection is
engaged.
Current day/time
Current program period
Wake/Leave/Return/Sleep
Set Schedule
Set Time
am
6
:
30
Set
Hold
Run
Set Day
WE
Set
Hold
Run
1. Press the SET button, then
press s or t to set the
clock time.
2. Press the SET button, then
press s or t to select the
day of the week.
3. Press RUN to save & exit.
Note:
If the clock flashes, the
thermostat will follow your settings
for the Monday “Wake” time period
until you reset the time and day.
Press SET, then adjust time.
Press SET, then select current day.
TH2110DV: For 1 Heat/1 Cool systems
TH2210DV: For 2 Heat/1 Cool heat pump systems only
M34678
Fan
Auto
On
Off
Cool
Heat
Set
Hold
Run
E.M. Heat
Set SYSTEM switch to control the
heating or cooling system.
Set FAN switch to choose whether the fan runs
continuously or only as needed.
CAUTION
Equipment damage hazard
To prevent possible compressor damage, do not
operate cooling system when outdoor temperature is
below 50°F (10°C).
Install two fresh AAA batteries
when Lo Batt flashes on the
screen. Lo Batt appears for 60
days before the batteries are
depleted.
Pull at bottom to remove
thermostat from wallplate.
Turn thermostat over, insert
fresh AAA alkaline batteries,
then reinstall thermostat.
M34673
M34679
Set
Cool
77
On
Fan
Auto
On
Fan
Auto
On
Off
Cool
Heat
Set
Hold
Run
E.M. Heat
Replace batteries once a year, or when you will
be away for more than a month.
Most settings are stored in non-volatile
(permanent) memory. Only the clock and the
day must be set after you replace the batteries.
MO TU WE TH FR
Wake
Set Schedule
Set
am
75
6
:
30
Set
Hold
Run
1. Press SET until Set
Schedule is displayed.
2. Press s or t to set your
weekday Wake time (MoFr), then
press SET.
3. Press
s or t to set the
temperature for this time period,
then press SET.
4. Set time and temperature for the
next time period (Leave). Repeat
steps 2 and 3 for each weekday
time period.
5. Press SET to set weekend time
periods (Sa & Su), then press RUN
to save & exit.
Note: Make sure the thermostat
is set to the system you want to
program (Heat or Cool).
Press SET
3 times, then adjust time.
Press SET, then set desired temperature.