Specifications

Igniters and Sensors
70-6910 147
Home
Controls Indoor Air Quality
Residential
Combustion Controls Hydronic Controls
Water
Controls Building Automation
Commercial
Components Pneumatic Controls
Industrial Combustion
Controls
Q3200 Glowfly™ Universal Hot Surface Igniter Kit
The Q3200U Universal Hot Surface Igniter Kit is designed to
provide a robust field service replacement igniter in gas fired
appliances with Norton/St Gobain 120 VAC silicon carbide hot
surface igniters. The Q3200U uses a 120 volt silicon nitride igniter
design with long life and high resistance to damage or burn out in
the appliance.
The kit includes the specially designed silicon nitride igniter and
six different bracket configurations to adapt the igniter to the
specific appliance application along with accessory parts to allow
mounting and wiring the igniter. Clear instructions and application
templates are provided to simplify selection of the proper bracket
and ease installation of the replacement.
Mounting Bracket: Multiple brackets to adapt as field replacement of
Norton / St. Gobain silicon carbide igniters
Q347 Spark Igniter
Produces spark for direct ignition of main burner.
• Includes inner Kanthal electrode with ceramic insulator, bracket and
Kanthal ground strap.
• Use with S87C, D, K; S89E,F and Q354A.
Ignitor, Sensor, Combination: Ignitor Only
Mounting Bracket: Bracket Style D
Q354 Flame Rectification Sensor
Detects the presence of main burner flame.
• Includes Kanthal rod supported by ceramic insulator and mounting
bracket.
• Use with S825, S87C,D,K or S89E,F.
Ignitor, Sensor, Combination: Sensor Only
Mounting Bracket: One 3/16 in. slot, three 3/16 in. untapped screw
holes.
Product Number Description
Q3200U1004 Glowfly(TM) Universal Hot Surface Igniter. Single Kit
Q3200U2002 Glowfly(TM) Universal Hot Surface Igniter. Service Pack of 6 kits
* TRADELINE models • SUPER TRADELINE models
Product Number
Length Mounting
Rod Angle Description(inch) (mm) (inch) (mm)
Q347A1004 2 1/32 in. 52 mm One 3/16 in. slot, three 3/16 in.
untapped screw holes.
One 5 mm slot, three 5 mm
untapped screw holes.
standard
orientation
Spark Ignitor Sensor with style D
mounting bracket
Q347A1012 2 1/32 in. 52 mm One 3/16 in. slot, three 3/16 in.
untapped screw holes.
One 5 mm slot, three 5 mm
untapped screw holes.
90 degree
angle
Spark Ignitor Sensor with style D
mounting bracket
* TRADELINE models • SUPER TRADELINE models
Product Number
Length Mounting
Rod Angle Description(inch) (mm) (inch) (mm)
Q354A1018 6 3/8 in. 162 mm One 3/16 in. slot, three 3/16 in.
untapped screw holes.
One 5 mm slot, three 5 mm
untapped screw holes.
straight Flame Sensor with 6.37 in. rod
height used with S825 or S87
* TRADELINE models • SUPER TRADELINE models