Submittal Sheet

Q5001 VALVE LINKAGE FOR MODUTROL IV MOTOR
63-2425—01 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
IMPORTANT:
The specifications given in this publication do not
include normal manufacturing tolerances.Therefore,
an individual unit may not exactly match the listed
specifications. Also, this product is tested and cali-
brated under closely controlled conditions and some
minor differences in performance can be expected if
those conditions are changed.
TRADELINE MODELS
TRADELINE MODELS are selected and packaged to provide
ease of stocking, ease of handling and maximum replace-
ment value. TRADELINE model specifications are the
same as those of standard models unless specified other-
wise.
Table 3 on page 4
TRADELINE MODELS AVAILABLE:
Q5001D1000 Valve Linkage: 3/4 in. lift, 80/160 lb force.
Q5001D1018 Valve Linkage: 3/4 in. lift, 160/320 lb force.
Q5001D1026 Valve Linkage: 1-1/2 in. lift, 160/320 lb force.
TRADELINE FEATURES:
• Selectable close-off force to meet application
requirements.Table 1 on page 3
• Special pack with Tradeline Cross Reference on label.
STANDARD MODELS
Q5001A,B Valve Linkage for Modutrol IV Motors.
See Table 1 on page 3 for model specifications. (Can also
be used with Modutrol III motors.)
LIFT: Selectable based on cam selection. See Table 3 on
page 4 for part numbers of alternate cams.
• Q5001A is shipped with 3/4 in. lift cam, part number
220861A.
• Q5001B is shipped with 1-1/2 in. lift cam, part
number 220867A.
CLOSE-OFF FORCE:
See Table 2 on page 4 for motor/valve/linkage selection.
VALVE BONNET SIZE:
See Table 2 on page 4 for bonnet size.
TEMPERATURE RATINGS:
-40
°
to 150
°
F [-40
°
to 66
°
C] ambient air temperature.
-40
°
to 337
°
F [-40
°
to 169
°
C] valve bonnet temperature.
MOTOR REQUIRED:
See Table 3 on page 4.
MOTOR STROKE:
160 degree rotation, mechanically normally open or nor-
mally closed.
VALVE ACTION:
Determined by motor rotation, cam orientation and valve
type. Cam mounting option (up or down) allows proper
control action with normally open or normally closed
motors and valves.
DIMENSIONS: See Fig. 1.
WEIGHT: 6.2 pounds.
ACCESSORIES:
4074ETB: Anti-spin clip, valve button and set screws for
1/4 in. [6 mm] valve stem.
Cams: See Table 3 on page 4 for merchandise cam part
numbers.