Product Overview

GLOBE VALVE LINKAGES
15 38-00020—01
SPECIAL ORDER FORM
This form is to be used if your existing valve is not listed in the selection chart located in the Globe Valve Linkage literature. Make
photocopies of this form as needed and e-mail completed forms to Honeywell's Take off Service at [e-mail]
to ensure proper linkage compatibility. A separate form should be used for each valve when information is different for valve size or
manufacturer. Please fill out form completely. Draw your own diagram using the space in Figure No. 4 below if necessary.
Quantity:
Valve Body Information:
Figure No. (choose 1, 2, or 3 below):
Manufacturer (if known):
Model No. (if known):
Valve Size:
2 Way 3 Way
Actuator (Mark all that apply):
On/Off Tri-State Modulating
Spring Return
24 V 120 V
Weather Proof Enclosure
Approximate Close-Off Required:
(PSI)
Valve Body Dimensions (see below for letter designations):
A=
B=
C= , th/in
D=
, th/in
E=
F=
G=
H=
I=
J=
Letter Designations (for above):
A = Height with stem down
B = Length of neck
C = Stem diameter and threads/inch
D = Major diameter and threads/inch
E = Lift (Stroke Length)
F, G, H, I = Neck dimensions
Comments:
Figure No. 4 (Draw your own)
M35312
FIGURE 1
A
B
I
F
D
G
E
LIFT/STROKE
LENGTH
DIAMETER AND
THREADS/INCH
C
STEM AND DIAMETER
AND THREADS/INCH
H
M35313
FIGURE 2
A
B
D
F
E
LIFT/STROKE
LENGTH
C
STEM AND DIAMETER
AND THREADS/INCH
DIAMETER AND
T
HREADS/INCH
M35314
FIGURE 3
A
B
E
LIFT/STROKE
LENGTH
C
STEM AND DIAMETER
AND THREADS/INCH
F
D