Spec Sheet
WorldwideO ffic e s
O ffice s ServingNorthAm erica
SkaneatelesF alls , NY
Tel:+13156858945
or,in NorthAm erica:+18007824263
sales@ hhp.com
Charlotte,NC
Tel:+17049983998
or,in NorthAm erica:+18007824263
sales@ hhp.com
O ffice s ServingEurope,
MiddleE ast,andAfrica
Europe
Tel:+31(0) 402901600
euro_sales@ hhp.com
UnitedKingdom
Tel:+44(0) 1925240055
euro_sales@ hhp.com
Ireland
Tel:+353(0)50244007
euro_sales@ hhp.com
France
Tel:+33(0) 146104111
euro_sales@ hhp.com
Germany
Tel:+49(0) 7477151377
euro_sales@ hhp.com
Spain
Tel:+34932287668
euro_sales@ hhp.com
O ffice s ServingAsiaan dth e
PacificRim
HongKong
Tel:+85225113050/25113132
asia_sales@hhp.com
Japan
Tel:+81352127392
asia_sales@hhp.com
O ffice s ServingLatinAm erica
Naples,Florida
Tel:+12392637600
la-sales@hhp.com
S„ oPaulo
Tel:+551150163454
la-sales@hhp.com
RioDeJaniero
Tel:+552124947060
la-sales@hhp.com
WebSiteAddresswww.hhp.com
HandHeldProducts,Inc .d/b/aHHP(ìHHPî)
1999-2002.Allrightsreserved.Printedinth e U.S.A.
Dueto HHPíscontinuingproductimprovementprograms,specificationsandfeatureshereinaresubjecttochangew ithoutnotice.
QCPC600/SS Rev A 9/02
Quick Check
®
PC600
Mechanical
Standard Hardware
Configuration: Interface/Input Box, power supply, and choice of mouse scanner, available in aperture sizes of 03, 05, 06, 10, 20 mils, or pen wand in
05, 06, and 10 mils. (Choose visible or infrared for either input device.)
Plugs into PC serial port
Optical Input Connector: 9-pin plastic squeeze-to-release male
Allows input from any existing or potential future HHP interchangeable scanner (excluding laser)
I/O Connector: 6-pin modular
Allows for I/O communications with computer
Power Connector: Power jack for powering input device and interface electronics
Uses existing HHP QCAC charger
Environmental
Operating Temperature: 32 to 122° F (0 to 50° C)
Storage Temperature: 14 to 158° F (-20 to 70°C)
Relative Humidity: 5% to 95% Non-condensing
ESD Sensitivity: Withstands 20 attempts to discharge 15Kv to the unit
Sealability: Meets NEMA 1
Shock: 3 feet (91 cm) to concrete
Software
Verification Modes: RL, RD, print contrast signal
ANSI/CEN/ISO reflectance parameters
Bar/Space dimensional measurement
Average bar growth/shrinkage
ANSI/CEN/ISO decodability
ANSI/CEN/ISO 10-scan grade averaging
Wide-To-Narrow ratio measurements
Scan profiles on CRT and printer output
Fixed message length testing
"X" dimension calculation
Scan speed variation indication
Variable or ANSI/CEN/ISO symbol grade averaging
Storage of scan results and scan profiles
Ability to add notations to scan file for later retrieval
Programming Procedures: Report generator allows choice of print format. Click directly on a parameter to configure its setting
Verification Methods: Parameters determined by the ANSI/CEN/ISO print quality standard or traditional pass/fail criteria
Result Indications: Visual, using an efficient graphical display
Audible using the PC speaker
Display Organization: Symbol Grade with Running Average
Scan Grade
Symbology and Symbol Data
Reflectance measurements, including RL, RD, Print Contrast, Rmin/Rmax, Minimum Edge, Contrast, Modulation, and Defects
Format parameters, including Check Digit and Message Length
Dimensional results, including Decodability, Intercharacter gap, Wide-To-Narrow Ratio, and Average Bar Error
Additional results and errors are available in a scrolling list
Symbologies Verified Code 39 (1 to 49 characters); Interleaved 2 of 5 (2 to 78 characters); EAN/UPC (-A, -E, -8 and -13) includes magnification settings in a
maximum of 16 steps consisting of: 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 130, 140, 150, 160, 180 and 200%; Codabar (1 to 61
characters); Code 128 (1 to 70 characters); Telepen
Applications: UCC/EAN 128
Safety/Regulatory FCC Class A, CE
IBM is a registered trademark of International Business Machines, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
System Requirements
• Windows
®
3.1x, 95, 98, 2000, or Windows NT
®
operating system
• PC (or compatible) with 486 or better processor
• 4 MB of RAM
• 3 MB available on hard drive
• Available COM Port (COM 1-4)
• Microsoft
®
-compatible mouse