Lyric Thermostat Setup Guide

ManualsBrandsHoneywell ManualsHeating & CoolingLyric Round Wi-Fi Thermostat, (Second Generation)

1

Installing your Lyric Round Wi-Fi Thermostat - Second Generation

with Apple HomeKit

These instructions are designed to help guide you through installing the second generation Lyric Round™

Wi-Fi Thermostat for intended use with Apple® HomeKit™. Integration with Apple HomeKit requires four

steps to ensure compatibility and operation.

Before you begin:

Lyric's implementation of Apple HomeKit requires a "C" wire. If your thermostat does not have a “C” wire the

Lyric Thermostat will still work but you will be unable to utilize Apple HomeKit functionality. To learn more

about your system compatibility and what a “C” wire is, click here.

Step 1: Remove your existing Lyric Thermostat. If this is your first time installing a Lyric thermostat, proceed

to step 2.

1. In your Lyric app, open the main menu (the three line icon the upper left hand

corner).

2. Locate and tap on the name of the thermostat you’re uninstalling and tap

“Thermostat Configuration.”

3. Take note your configuration settings. You will need these when you configure

your new Lyric Round.

4. Tap on “Delete” to remove the thermostat.

5. Uninstall thermostat from your wall. Refer to the Quick Start Guide, if necessary.

Step 2: Update the iOS software on your smartphone or tablet to the latest version. Download the latest

Lyric app.

Step 3: Review iOS settings & iCloud

You must have Keychain access enabled for HomeKit to work.

1. On your iOS smartphone or tablet, go to Settings > iCloud. Ensure you are

actively signed in to iCloud.

2. Ensure that iCloud Drive is on.

If iCloud does not appear or if you are still experiencing issues, turn off your

iCloud Keychain. Then turn back on. It may take several minutes for the

synchronization to complete. To learn more about iCloud syncing issue, click

here.

3. Ensure Keychain is on.

Summary of content (2 pages)

PAGE 1
Installing your Lyric Round Wi-Fi Thermostat - Second Generation with Apple HomeKit These instructions are designed to help guide you through installing the second generation Lyric Round™ Wi-Fi Thermostat for intended use with Apple® HomeKit™. Integration with Apple HomeKit requires four steps to ensure compatibility and operation. Before you begin: Lyric's implementation of Apple HomeKit requires a "C" wire.
PAGE 2
Step 4: Verify Lyric app settings 1. Go to Settings > Lyric. 2. Ensure that your Lyric app has access to the following:  Location - Always  Home Data - On  Notifications - Allow Notifications You have now completed the steps required to enable Apple HomeKit with the second generation Lyric Thermostat. Once you have configured your app, you can test the integration by performing a voice command via Siri. For example, issue the command “set thermostat to 72 degrees”.