T5+ Smart Thermostat Following Schedule RCHT8612WF2005 Fan Mode Programmable Thermostat Quick Install Guide Heat Wake Mode Auto Away Home Menu Sleep Fan Search for local rebates: HoneywellHome.com/Rebates Read before installing For more information visit resideo.
Included in your box: Thermostat literature Screws and anchors UWP™ Mounting System (UWP) T5 Smart Thermostat C-Wire Power Adapter (Located under thermostat. Open end of box to remove it. T5 Smart Thermostat models that don’t show a + on the package after “T5” do not have the C-wire adapter in the box.
Get the most from T5 Smart Thermostat Multiple programming options that fit your lifestyle: 1. Location-Based scheduling – The thermostat uses your smartphone’s location to know when you’re away, and saves you energy. Through geofence technology, it senses your return and helps make you comfortable upon arrival. You can always manually change your preset Home and Away temperature either on the thermostat or on the Honeywell Home app. 2.
Tools you will need: Smartphone To install your thermostat and photograph existing wiring. Phillips screwdriver Small flat head screwdriver Pencil Level Home Wi-Fi Password You may need: Wire stripper Needle-nose pliers Drill and drill bit 4 Honeywell Home app To configure your system and connect to your smartphone.
CAUTION: ELECTRICAL HAZARD Can cause electrical shock or equipment damage. Disconnect power before beginning installation. CAUTION: EQUIPMENT DAMAGE HAZARD Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the compressor quickly. CAUTION: MERCURY NOTICE If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash.
Removing your old thermostat 1 Turn power OFF To protect yourself and your equipment, Turn off the power at the breaker box or switch that controls your heating/ cooling system. ON OFF OFF Switch Breaker box 2 Check that your system is off Change the temperature on your old thermostat. If you don’t hear the system turn on within 5 minutes, the power is off. 75 ON OFF Note: If you have a digital thermostat that has a blank display, skip this step.
1 4 Make sure there are no 120V/240V wires Do you have thick black wires with wire nuts? Is your thermostat 120V or higher? If you answered yes to either of these questions, you have a line voltage system and the thermostat will not work. If you are unsure visit: resideo.com 5 Wire nut Thick black wire Take a picture of how your wiring looks right now Be sure to include the letters next to the terminals where the wires are inserted. This will be a helpful reference when wiring your thermostat.
7 8 Record if you have wires in the following terminals Do not include jumpers as a part of your count. The thermostat does not need jumpers. Terminal Wire Color R Rh Rc Write down the color of the wires Check mark the wires that are connected to terminals. Next to the check mark, write down the color of the wire. Do not include jumpers as a part of your count.
Do you see a wire connected to the C terminal? If yes, skip to step 10. If you do not see a C wire, proceed with the options below: Option A - Finding the C-Wire: There might be an extra wire pushed into the wall or wrapped around the wire bundle. Gently pull the wire bundle out of the wall to check for unused wires. If you have an unused wire, connect that wire to the C terminal on your new thermostat in step 13.
Installing your T5 Smart Thermostat T5 Smart Thermostat Screws UWP Mounting System 10 Anchors Wall
Bundle and insert wires through the UWP Pull open the UWP and insert the bundle of wires through the back of the UWP. Make sure at least 1/4-inch (6 mm) of each wire is exposed for easy insertion into the wire terminals. 12 Insert the wall anchors It is recommended that you use the wall anchors included in the box to mount your thermostat. You can use the UWP to mark where you want to place the wall anchors. a) Level the wall plate. b) Mark the location of the wall anchors using a pencil.
13 Set R-switch position and insert R-wire or wires Set the R-switch up or down based on your wiring notes in Step 7. Insert wires into the inner holes of the terminals on the UWP. The tabs will stay down once the wire is inserted. If you have 1 R-wire (R, Rh, or Rc) 1. Set R-switch to the up position. 2. Insert your R-wire (R, Rh or Rc) into R-terminal. or If you have 2 R-wires (R or Rh, and Rc) 2. Insert your Rc wire into Rc-terminal. 1. Set R-switch to the down position. 3.
14 Connect remaining wires from Step 8 Tip: Do not mount the UWP to the wall prior to connecting the wires. This wiring is just an example, actual wiring may vary. Depress the tabs to put the wires into the inner holes of their corresponding terminals on the UWP (one wire per terminal) until it is firmly in place. Gently tug on the wires to verify they are secure. Tip: If you need to release the wires again, push down the terminal tabs on the sides of the UWP.
16 Attach your thermostat Align the thermostat onto the UWP and firmly snap it into place. ON o 90 17 Turn your power ON Turn on the power at the breaker box or switch that controls the heating/ cooling system. ON ON OFF Switch Breaker box 18 Return to the thermostat Return to the thermostat. Confirm the screen shows START SETUP. If it does, continue to “Setup with Honeywell Home App” on page 15. If your thermostat does not show START SETUP, please contact Resideo support.
Setup with Honeywell Home App 1 Start Setup with the app Touch START SETUP on thermostat. 2 Select to setup with the app Touch Yes on the USE APP screen. No Yes Back 3 Your thermostat is now ready to be configured using the Honeywell Home app a.) Download the “Honeywell Home” app from the App store or Google play. b.) Open the Honeywell Home app. Your thermostat should appear under Thermostat Found. Tap SET UP NOW as shown below to continue.
How to use your Honeywell Home App Thermostat MY HOME Access the menu 72˚ FOLLOWING SCHEDULE Set desired temperature 72˚ Select Fan mode Auto/On/Circulate. Select System mode Auto/Heat/ Cool/Off/EM Heat MODE FAN SCHEDULE Schedule your home comfort Interested in more Resideo products? Visit resideo.com to learn about all available products connected by the Honeywell Home app. App is regularly enhanced and may change.
How to use your T5 Smart Thermostat Desired temperature Indoor Temperature Adjust temperature Displays desired indoor temperature. Displays current indoor temperature. Touch + or - to set your desired indoor temperature. Fan Mode Heat Mode Auto Menu Fan Mode Menu Fan Select System mode Auto/Heat/Cool/Off/ EM Heat (emergency heat). Contains features: schedule, screen lock, ventilation, Wi-Fi, clean screen, and other thermostat settings. Select Fan mode Auto/On/Circulate.
Manual Setup If your Wi-Fi network is not working, you can alternatively setup your thermostat manually and connect your phone later. 1 Start manual setup Touch START SETUP to begin. 2 Select manual setup On the USE APP screen, touch No. No 3 Yes Navigate and edit setup options Use or to navigate through all the setup options. To see a list of all setup options, go to pages 20-21. To edit an option value, touch Edit or touch text area. The value is now blinking. Use select the correct value.
Manual Setup (cont.) 4 Finish Setup Touch until you see Finish Setup. Touch Select or touch text area. Select 5 Setup Wi-Fi At the end of setup process you will be prompted to SETUP WIFI. If your Wi-Fi is still not working, you have to manually set the time and date. Select No on the SETUP WIFI screen. No Yes Back 6 Set time and date Set daylight saving time if you are in an area that follows daylight saving time. Set date, clock format and time on the next screens.
Equipment Setup Options Option # Option Name Option Value (factory default in bold) 120 Schedule Type No Schedule MO-SU = Every day the same MO-FR SA SU = 5-1-1 schedule MO-FR SA-SU = 5-2 schedule Each Day = Every day different Note: You can change default MO-FR, SA-SU schedule here. To edit periods during days, temperature setpoints, or to turn Schedule On/ Off, touch MENU from the Home screen and go to SCHEDULE.
Equipment Setup Options Option # Option Name Option Value (factory default in bold) 220 Cool Stages/ Compressor Stages (#200=Conv./ #200=HP (149.14 kW)) 0, 1, 2 Note: Select how many Cool or Compressor stages of your equipment the thermostat will control. Maximum of 2 Cool/Compressor Stages. 221 Heat Stages/ Aux/E Stages (#200=Conv./ #200=HP (149.14 kW)) Heat Stages: 0, 1, 2 Aux/E stages: 0, 1 Note: Select how many Heat or Aux/E stages of your equipment the thermostat will control.
Frequently Asked Questions Will the T5 Smart Thermostat still work if Wi-Fi connection is lost? Yes, the temperature can be adjusted directly at the thermostat. However, some features, including geofencing, are managed only through the Honeywell Home app and will not function while the connection is down. The thermostat will automatically reconnect to Wi-Fi once the network is restored. The T5 Smart Thermostat is not finding the in home Wi-Fi network. The thermostat operates in the 2.4 GHz range.
Frequently Asked Questions Why is the thermostat showing up as offline (strike-through Wi-Fi icon) on top of right corner of thermostat display? If the thermostat displays a strike-through Wi-Fi icon on its screen or shows up as offline on the Honeywell Home app, it has lost connection to the network. Make sure the router is powered and broadcasting. The home’s Wi-Fi network may need to be reset by power cycling the router. Consult the router’s instruction manual for directions on power cycling.
Apple® HomeKit™ Setup Code The T5 Smart supports Apple HomeKit. When prompted by the Honeywell Home app, scan the code on the last page (back cover) of this guide. 2-Year Limited Warranty For Warranty information go to resideo.com Wi-Fi® is a registered trademark of Wi-Fi Alliance® Resideo Technologies, Inc. 1985 Douglas Drive North, Golden Valley, MN 55422 www.resideo.com 33-00386ES—11 M.S. Rev. 06-20 | Printed in United States © 2020 Resideo Technologies, Inc. All rights reserved.
Termostato inteligente T5+ Following Schedule RCHT8612WF2005 Fan Mode Termostato Programable Guía de instalación rápida Heat Wake Mode Auto Away Home Menu Sleep Fan Buscar rebajas locales: HoneywellHome.com/Rebates Leer antes de instalar Para obtener más información, visite resideo.
Esta caja incluye: Material de lectura sobre el termostato Tornillos y tarugos Sistema de montaje con UWPMR (UWP) Termostato inteligente T5 Adaptador de corriente del cable C (Ubicado debajo del termostato. Abra el extremo de la caja para retirarlo. Los modelos de termostato inteligente T5 que no muestran un “+” en el paquete después de “T5” no tienen el adaptador del cable C en la caja.
Aproveche al máximo el termostato inteligente T5 Múltiples opciones de programación que se adaptan a su estilo de vida: 1. Programación según la ubicación: El termostato utiliza la ubicación de su teléfono inteligente para saber cuándo usted no está en casa y ahorrarle energía. A través de la tecnología Geofence, detecta su regreso y le ayuda a que se sienta confortable cuando llegue.
Herramientas que necesitará: Teléfono inteligente Para instalar su termostato y fotografiar el cableado existente. Destornillador de estrella Destornillador plano pequeño Lápiz Nivel Contraseña de WiFi del hogar Es posible que necesite: Pelacables Pinzas de punta fina Taladro y broca 4 Aplicación Honeywell Home Para configurar su sistema y conectarlo a su teléfono inteligente.
PRECAUCIÓN: PELIGRO DE DESCARGA ELÉCTRICA Puede causar descargas eléctricas o daños al equipo. Desconecte el suministro eléctrico antes de comenzar la instalación. PRECAUCIÓN: RIESGOS DE DAÑOS AL EQUIPO. Se evita la protección del compresor durante la prueba. Para prevenir daños al equipo, evite encender y apagar rápidamente el compresor.
Extracción del termostato existente 1 DESCONECTE el suministro de energía eléctrica Para protegerse a sí mismo y al equipo, desconecte el suministro eléctrico en la caja de interruptores o en el interruptor que controla el sistema de calefacción/ refrigeración. Encendido Apagado Apagado Interruptor Caja de interruptores de circuito Encendido 2 Verifique que su sistema esté desconectado Cambie la temperatura en el termostato existente.
1 4 Asegúrese de que no haya cables de 120 V/240 V ¿Tiene cables negros gruesos con empalmes para cables? ¿Tiene su termostato 120 V o más? Si respondió afirmativamente a cualquiera de estas preguntas, tiene un sistema de voltaje en línea y el termostato no funcionará. Si no está seguro, visite: resideo.com 5 Empalme para cables Cable negro grueso Tome una fotografía del cableado ahora Incluya las letras que se encuentran al lado de los terminales donde están insertados los cables.
7 8 Registre si tiene cables en las siguientes terminales No incluya los puentes como parte de su conteo. El termostato no necesita puentes. Terminal Color del cable R Rh Rc Escriba el color de las cables Haga una marca de verificación en los cables que están conectados a los terminales. Al lado de la marca de verificación, escriba el color del cable. No incluya los puentes como parte de su conteo.
9 ¿Ve un cable conectado al terminal C? De ser así, salte al paso 10. Si no ve un cable C, siga con las opciones a continuación: Opción A - Cómo encontrar el cable C: Podría haber un cable adicional incrustado en la pared o enrollado al conjunto de cables. Tire suavemente del conjunto de cables para extraerlo de la pared y verificar si hay cables sin usar. Si tiene un cable que no esté en uso, conecte ese cable al terminal C de su nuevo termostato en el paso 13.
Instalación del termostato inteligente T5 Termostato inteligente T5 Tornillos Sistema de montaje con UWP 10 Tarugos Pared
11 Agrupe e inserte los cables a través de la UWP Hale para separar la UWP e inserte el grupo de cables a través de la parte posterior de la UWP. Compruebe que al menos 1/4 de pulgada (6 mm) quede expuesto para la inserción fácil en los terminales de cables. 12 Inserte los tarugos de pared Para montar su termostato, se recomienda que utilice los tarugos de pared que se suministran en la caja. Puede utilizar la UWP para marcar donde desea colocar los tarugos de pared. a) Nivele la placa de pared.
13 Establezca la posición del interruptor R e inserte el cable R o los cables Coloque el interruptor R hacia arriba o hacia abajo en función de sus notas de cableado del paso 7. Inserte los cables en los agujeros internos de los terminales en la UWP. Las lengüetas estarán en la posición inferior una vez insertado el cable. Si tiene 1 cable R (R, Rh, or Rc) 1. Coloque el interruptor R en la posición hacia arriba. 2. Inserte su cable R (R, Rh o Rc) en el terminal R. o Si tiene 2 cables R (R o Rh y Rc). 2.
14 Conecte los cables restantes del paso 8 Consejo: No monte la UWP en la pared antes de conectar los cables. Presione las lengüetas hacia abajo para poner los cables en los agujeros internos de sus correspondientes terminales en la UWP (un cable por terminal) hasta que esté firmemente en su lugar. Hale suavemente los cables para verificar que estén seguros. Consejo: Si necesita sacar los cables nuevamente, presione las lengüetas del terminal hacia abajo, en los costados de la UWP.
16 17 Instale el termostato Alinee el termostato en la UWP y presiónelo para que calce en su lugar. Ence o 90 CONECTE la energía eléctrica Active el suministro de electricidad en la caja de interruptores o en el interruptor que controla el sistema de calefacción/refrigeración. Encedido Encedido Apagado Interruptor Caja de interruptores de circuito 18 Regrese al termostato Encedido Regrese al termostato. Confirme que en la pantalla se lea START SETUP (iniciar configuración).
Configurar usando la aplicación Honeywell Home 1 Inicie la configuración con la aplicación Toque START SETUP (iniciar configuración) en el termostato. 2 Seleccione configurar con la aplicación Toque Yes (Sí) en la pantalla USE APP (configurar la aplicación). No Yes Back 3 El termostato está listo para configurar usando la aplicación Honeywell Home a.) Descargue la aplicación “Honeywell Home” desde la tienda de aplicaciones o desde Google play. b.) Abra la aplicación Honeywell Home.
Cómo usar la aplicación Honeywell Home Thermostat MY HOME Acceso al menú 72˚ FOLLOWING SCHEDULE Seleccione el modo del ventilador Auto (automático)/ On (activado)/ Circulate (circulación) Seleccione el modo del sistema: Auto (automático)/Heat (calefacción)/Cool (refrigeración)/ Off (apagado)/EM Heat (calefacción de emergencia) Configure la temperatura deseada 72˚ MODE FAN SCHEDULE Programar la comodidad de su hogar ¿Está interesado en más productos? Visite resideo.
Cómo usar el termostato inteligente T5 Temperatura deseada Temperatura interior Muestra la temperatura interior deseada. Muestra la temperatura interior actual. Toque + o - para configurar su temperatura interior deseada. Fan Mode Heat Mode Ajuste de la temperatura Auto Menu Fan Mode (Modo) Menu (Menú) Fan (Ventilador) Seleccione el modo del sistema: Auto (automático)/Heat (calefacción)/Cool (refrigeración)/ Off (apagado)/EM Heat (calefacción de emergencia).
Configuración manual Si su red WiFi no está funcionando, como alternativa, puede configurar su termostato manualmente y conectar su teléfono más tarde. 1 Inicie el modo de configuración manual Toque START SETUP (INICIAR CONFIGURACIÓN) para comenzar. 2 Seleccione el modo de configuración manual En la pantalla USE APP (configurar la aplicación), toque No. No 3 Yes Navegue y edite las opciones de configuración Use o para navegar por las opciones de configuración.
Configuración manual (continuación) 4 Finalice la configuración Avance hasta que lea Finish Setup (Finalizar configuración). Toque Select (seleccionar) o toque el área con texto. Select 5 Configure el WiFi Al finalizar el proceso de configuración se le dirigirá a SETUP WIFI (Configuración de WiFi). Si su WiFi no está funcionando tendrá que colocar manualmente la hora y la fecha. Seleccione No en la pantalla SETUP WIFI (CONFIGURAR WIFI).
Opciones de configuración del equipo N.º de opción: Nombre de la opción Valor de la opción (las configuraciones predeterminadas de fábrica están en negrita) 120 Tipo de programación No Schedule (Sin programación) MO-SU = Every day the same (LU.-DO. = Todos los días iguales) MO-FR SA SU = 5-1-1 schedule (LU.-VI. SÁ. DO. = Programación 5-1-1) MO-FR SA-SU = 5-2 schedule (LU.-VI. SÁ.-DO.
Opciones de configuración del equipo N.º de opción: Nombre de la opción Valor de la opción (las configuraciones predeterminadas de fábrica están en negrita) 220 Etapas de refrigeración/etapas del compresor (#200=Conv./ #200=HP (149.14 kW)) 0, 1, 2 Nota: Seleccione cuántas etapas de refrigeración o del compresor de su equipo controlará el termostato. Máximo de 2 etapas de refrigeración/del compresor. 221 Etapas de calefacción/Aux/Emer (#200=Conv./ #200=HP (149.
Preguntas frecuentes ¿Sigue funcionando el termostato inteligente T5 si se pierde la conexión a la red wifi? Sí, la temperatura se puede ajustar directamente en el termostato. Sin embargo, algunas características, incluida la geovalla, solo pueden gestionarse a través de la aplicación Honeywell Home y no funcionarán si se interrumpte la conexión. El termostato se reconectará automáticamente al WiFi una vez que se restaure la red. El termostato inteligente T5 no encuentra la red wifi del hogar.
Preguntas frecuentes ¿Por qué el termostato se muestra como desconectado (icono de WiFi tachado) en la esquina superior derecha de la pantalla? Si el termostato muestra un ícono de wifi tachado en la pantalla o aparece como fuera de línea en la aplicación Honeywell Home significa que ha perdido conexión con la red. Es posible que deba reiniciar la red WiFi del hogar apagando y encendiendo el enrutador. Consulte el manual de instrucciones del enrutador sobre cómo hacerlo.
Garantía limitada de 2 años IMPORTADO EN MEXICO POR: INSTROMET MEXICANA S DE R L DE C V Avenida Insurgentes 2453, Piso 6, Tizapan, Alvaro Obregon, Ciudad de Mexico, CP 01090 Telefono: 01 (55) 800 00423 Instromet Mexicana S. de R.L. de C.V. garantiza que éste producto está libre de defectos en su mano de obra y materiales contra cualquier defecto de fabricación y funcionamiento, bajo uso normal, por el término de 2 años a partir de la fecha de la compra por el consumidor.
Esta garantía es la única garantía expresa que Instromet Mexicana S. de R.L. de C.V. ofrece respecto de este producto. La duración de cualquier garantía implícita, incluidas las garantías de comerciabilidad e idoneidad para un fin específico, se limita por el presente a la duración de dos años de esta garantía. Esta garantía no es válida en los siguientes casos: 1. Cuando el producto haya sido utilizado en condiciones distintas a las normales (aquellas para las que está destinado). 2.
26
27
Código de configuración de HomeKitMR de Apple® El T5 inteligente es compatible con Apple HomeKit. Escanee este código cuando lo indique la aplicación Honeywell Home. Wi-Fi® es una marca comercial registrada de Wi-Fi Alliance®. Resideo Technologies, Inc. 1985 Douglas Drive North, Golden Valley, MN 55422 www.resideo.com 33-00386ES—11 M.S. Rev. 06-20 | Impreso en EE. UU. © 2020 Resideo Technologies, Inc. All rights reserved.