Jumbo Weather Clock with Wireless Indoor/Outdoor Thermometer USER MANUAL (RCW33W) 1 1
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Jumbo Weather Clock with Wireless Indoor/Outdoor Thermometer. This device includes weather forecast with pressure trend, precise time keeping and temperature monitoring features that you can use from the comfort of your home.In this package you will find: • Main unit (receiver) • Remote sensor (transmitter) TS13 Please keep this manual handy as you use your new item.
A WEATHER CLOCK IN TWO - LINE LCD DISPLAY Shows the weather forecast with trend, indoor/outdoor temperature and calendar clock. B MODE BUTTON 1). Toggles between 2 display modes: SECONDS setting and WEEKDAY. 2). Sets the year, date and time. A C “UP” BUTTON 1). Increases the setting. 2). Enables Atomic Clock. 3). Enables Time Zone selection. D “DOWN” BUTTON 1). Decreases the setting. 2). Enables remote sensor signal search. E G B D C E BATTERY COMPARTMENTS Accommodates 2 (two) UM-3 or AA 1.
REMOTE SENSOR FEATURES • Remote temperature transmission to the main unit via 433 MHz signal • Case can be wall mounted using built-in hanger • 100 feet transmission range without interference • LCD display of measured temperature • Temperature display unit (C°or F°) selection • Transmission channel selection A LED INDICATOR 1). Flashes once when the remote sensor transmits the reading to the main unit. 2). Flashes twice indicating low battery. B BATTERY COMPARTMENT Holds two AA-size batteries.
BEFORE YOU BEGIN 1. We recommend using alkaline batteries for the main unit and remote sensor. 2. Avoid using rechargeable batteries. 3. Insert batteries before first use, matching the polarity as shown in the battery compartment. 4. Always install batteries in the remote sensor before the main unit. 5. Press RESET after each battery change, using a paper clip or similar tool. 6. During an initial setup, place the main unit as close as possible to the remote sensor. 7.
READING THE KINETIC WAVE DISPLAY The kinetic wave display shows the main unit (receiver) signal reception strength. The unit is in searching mode WEATHER FORECAST The weather station is capable of detecting pressure changes. Based on collected data, it forecasts the weather for the next 12 to 24 hours. Temperature readings are securely registered. ˚F No signals. WWVB RADIO CONTROLLED TIME The NIST (National Institute of Standards and Technology) radio station is located in Ft. Collins Colorado.
3. The path between units is clear of obstacles. Shorten the distance between units if necessary. 4. Fresh batteries are installed correctly in both remote sensor and main unit. Note: When the temperature falls below freezing, the batteries in outdoor remote sensor may have reduced voltage supply and a shorter effective range. We recommend to Use lithium-ion batteries at the temperatures below 32°F 3.
SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature Proposed operating range : -5.0°C to +50.0°C / 23.0°F to 122.0°F : 0.1°C/ 0.2°F Temperature resolution Remote Sensor Proposed operating range with alkaline batteries : -20°C to + 70°C / -4°F to 158°F Proposed operating range with lithium batteries Temperature resolution : - 38°F to 158°F ( -38.8 C° to 70°C) : 0.1°C/ 0.
DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 declare that the product Product No.: RCW33W Product Name: Jumbo Weather Clock with Wireless Indoor/ Outdoor Thermometer Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.