Install Guide

3
Install Doorbell
If you are not mounting the doorbell to the wall,
place it where you want it.
1. Mount the screw on to the wall using the

the screw sticking out from the wall.
Drill 1/4 inch (6.3 mm) holes for the anchor.
2. Hang the doorbell on the screw.
Installation
Choose a location that is not near a heat source or on something that moves
(like a door). For non-mounting locations, choose a place where the doorbell
will be easy to hear.
Install Push Button
1. Mount the push button bracket
in the desired location.
Use the screws

Use the adhesive backing. If
using the adhesive backing,
clean the surface first.
2. Snap the push button onto the
mounting bracket.
–OR–
Note: If you need to remove the push button, use a small
screwdriver to release the tab.