Install Instructions

3 65-0100—2
RM7800G1018 WITH DISPLAY 60 HZ 
RM7800G1000 WITH DISPLAY 50 HZ
RM7840G1014 WITHOUT DISPLAY 60 HZ
RM7840G1006 WITHOUT DISPLAY 50 HZ
Q7800A1005 PANEL MOUNT OR
Q7800B1003 BURNER/WALL 
MOUNT
SELECT A 
SUBBASE
SELECT A 
PURGE CARD
ST7800A1005 2 SEC.
ST7800A1013 7 SEC.
ST7800A1021 10 SEC.
ST7800A1039 30 SEC.
ST7800A1047 40 SEC.
ST7800A1054 60 SEC.
ST7800A1062 90 SEC.
ST7800A1070 2.5 MIN.
ST7800A1088 4 MIN.
ST7800A1096 6 MIN.
ST7800A1104 9 MIN.
ST7800A1112 12 MIN.
ST7800A1120 15 MIN.
ST7800A1138 22 MIN.
ST7800A1146 30 MIN.
R7847A1025 0.8 SEC. FFRT (RECTIFICATION). USE 
 W/FLAME RODS OR PHOTOCELLS.
R7847A1033 3.0 SEC. FFRT (RECTIFICATION). USE
 W/FLAME RODS, PHOTOCELLS OR 
C7012A,C.
R7847B1023 0.8 SEC. FFRT (RECTIFICATION). USE 
W/FLAME RODS OR PHOTOCELLS.
R7847B1031 3.0 SEC. FFRT (RECTIFICATION). USE 
W/FLAME RODS, PHOTOCELLS OR 
C7012A,C.
R7847C1005 3.0 SEC. FFRT (C7012E,F)
R7848A1008 3.0 SEC. FFRT (C7015)
R7848B1006 3.0 SEC. FFRT (C7015)
R7849A1015 0.8 SEC. FFRT (C7027/C7035/C7044)
R7849A1023 3.0 SEC. FFRT (C7027/C7035/C7044)
R7849B1013 0.8 SEC. FFRT (C7027/C7035/C7044)
R7849B1021 3.0 SEC. FFRT (C7027/C7035/C7044)
R7886A1001 3.0 SEC. FFRT (C7076A,D)
COMMUNICATIONS
Q7700A1014 BASE UNIT
QS7800A1001 CONTROLBUS MODULE™
ZM7850A1001 COMBUSTION SYSTEM MANAGER®
S7810A1009 DATA CONTROLBUS MODULE™
(MUST USE IF KEYBOARD DISPLAY MODULE IS 
NOT PRESENT ON RELAY MODULE)

EXPANDED ANNUNCIATION
S7830A1005 EXPANDED ANNUNCIATOR
S7810A1009 DATA CONTROLBUS MODULE™
(MUST USE IF KEYBOARD DISPLAY MODULE IS 
NOT PRESENT ON RELAY MODULE)

REMOTE DISPLAY MOUNTING
203765 REMOTE MOUNTING BRACKET
13 VDC POWER SUPPLY
• 203968A PLUG-IN
 S7810A1009 DATA CONTROLBUS MODULE™
(MUST USE IF KEYBOARD DISPLAY MODULE IS 
NOT PRESENT ON RELAY MODULE)
REMOTE RESET
S7820A1007 REMOTE RESET MODULE
DISPLAY MODULE
S7800A1001 DISPLAY MODULE
(RM7840G OR RM7840M ONLY)
1 120 VAC.

2 FFRT = FLAME FAILURE RESPONSE TIME.

3 ONE Q7700 WILL SUPPORT ANY COMBINATION OF UP TO SIX (6) QS7700s/QS7800s.
RM7800M1011 WITH DISPLAY 60 HZ 
RM7800M1003 WITH DISPLAY 50 HZ
RM7840M1017 WITHOUT DISPLAY 60 HZ
RM7840M1009 WITHOUT DISPLAY 50 HZ
1 1
2
3
SELECT A RELAY
MODULE
SELECT A FLAME
AMPLIFIER
SELECT 
OPTIONS
ON - OFF BURNER CONTROL RECYCLE MODULATING BURNER CONTROL
OR
M1940C
1.)
2.)
3.)
4.)
5.)