Product Overview
Table Of Contents
- Application
- Features
- Optional Features
- Specifications
- Principal Technical Features
- Safety Provisions
- Internal Hardware Status Monitoring
- Closed Loop Logic Test
- Dynamic AMPLI-CHECKTM Circuitry
- Dynamic Input Check
- Dynamic Safety Relay Test
- Dynamic Self-Check Safety Circuit
- Expanded Safe-Start Check
- Off Cycle (Standby) Flame Signal Check
- Tamper Resistant Timing and Logic
- Verified Spark Termination
- First-Out Annunciation and Self- Diagnostics
- Interlock Requirements (RM7895 Only)
- Installation
- Wiring
- Assembly
- Operation
- Initiate
- Standby
- Static Checkout
- Checkout
- Equipment Recommended
- Checkout Summary
- Preliminary Inspection
- Flame Signal Measurement
- Initial Lightoff Check for Proved Pilot
- Initial Lightoff Check for Direct Spark Ignition (DSI)
- Pilot Turndown Test (All Installations Using a Pilot)
- Ignition Interference Test (All Flame Rods)
- To Eliminate Ignition Interference
- Flame Signal with Hot Combustion Chamber (All Installations)
- Safety Shutdown Tests (All Installations)
- Troubleshooting
