User Manual
Table Of Contents
- RP2B/RP2D/RP4B/RP4D
- Thermal Printers
- Table of Contents
- Customer Support
- Get Started
- Load the Media
- Program the Interface
- Printer Display and Buttons
- Calibration
- Configuration Files
- Maintenance
- Troubleshooting
- Product Specifications
- Accessories
- Printer Language Emulation
- Print Demo
22 RP2/RP4 User Guide
3. Click on WPA/WPA2.
4. Change (or confirm) the following parameter settings:
• Group Cipher: TKIP
• Network Authentication Type: WPA-PSK_TKIP
5. Type the pass phrase under WPA_PSK_TKIP/WPA2_PSK settings.
6. After updating the New Value column, click the Send button to send this
change to the printer.
7. Allow 30 seconds for the printer to reset.