Submittal Sheet

RP7517A, B
Electronic-Pneumatic Transducers
Copyright © 1991 Honeywell Inc. • All Rights Reserved
77-5014
SPECIFICATION DATA
GENERAL
The RP7517A, B Electronic-Pneumatic Transducers are used
in electronic-pneumatic control systems to convert a
proportional electric output signal from a controller into a
direct-acting, proportional pneumatic signal.
The RP7517A is powered by the control signal. It is available
with a cover or without a cover for panel mounting (the panel
model has a higher pressure output than the cover model and
is approximately equal to the RP7517B in branchline buildup).
The RP7517B (used with Excel) has an internal amplifier and
requires a lower current control signal. It is available with a
cover or without a cover for panel mounting.
FEATURES
Screw mounting or snap rail (models with cover)
Factory calibrated
Dual barb fittings
High accuracy
RC150
RC151

Summary of content (4 pages)