69-2457EFS-01.
69-2457EFS-01.book Page 2 Monday, January 7, 2013 3:21 PM Power-On 1) Pry the switch door open from the bottom using a small screwdriver. Reset 2) Ensure the ON/OFF selector is set to ON. 3) Reset the switch using a paper clip. 0:00 will flash. Control (4) If the display is blank: • Ensure the ON/OFF selector is properly engaged in the On/Off selector ON position. Push it to the right using a small screwdriver.
69-2457EFS-01.book Page 3 Monday, January 7, 2013 3:21 PM Programming the schedule You can set up to 7 programs. To set a program, you need to enter its start time (ON) and its end time (OFF). 1) Pry the switch door open using a small screwdriver. 2) Press the PGM button to display a program and its On or Off time. For example, when you first press PGM, program number 1 (P1) and its On time (ON) will appear. - : - - will appear instead of the time if the program is not set (inactive).
69-2457EFS-01.book Page 4 Monday, January 7, 2013 3:21 PM Technical Specifications Supply: 120 VAC, 50 / 60 Hz Maximum load: 2400 watts resistive or inductive, 1 HP motor Operating temperature range: 5°F to 122°F (-15°C to 50°C) Storage temperature range: -4°F to 122°F (-20°C to 50°C) Power outage: The programs are protected by a rechargeable battery. The screen is blank during the power outage.
69-2457EFS-01.book Page 1 Monday, January 7, 2013 3:21 PM RPLS730B / RPLS731B Mode d’installation et d’emploi Interrupteur mural programmable Applications L’interrupteur mural programmable RPLS730B / RPLS731B a été conçu pour commander des appareils d’éclairage et des moteurs.
9-2457EFS-01.book Page 2 Monday, January 7, 2013 3:21 PM Démarrage 1) Soulevez le bas du couvercle de l’interrupteur à l’aide d’un petit tournevis. réinitialisation 2) S’assurer que le sélecteur ON/OFF est placé à ON. 3) Réinitialiser l’interrupteur à l’aide d’un trombone. 0:00 touche de contrôle (4) clignotera à l’écran. Si rien n’est affiché à l’écran : sélecteur • S’assurer que le sélecteur ON/OFF est bien mis à la position On/Off ON. Le placer bien à droite à l’aide d’un petit tournevis.
69-2457EFS-01.book Page 3 Monday, January 7, 2013 3:21 PM Programmation de l’horaire Vous pouvez enregistrer jusqu'à 7 programmes. Pour enregistrer un programme, vous devez régler l’heure du début (ON) et l’heure de la fin (OFF). 1) Soulevez le bas du couvercle de l’interrupteur à l’aide d’un petit tournevis. 2) Appuyer sur la touche PGM pour afficher un programme et l’heure du début (ON) du programme ou l’heure de la fin (OFF) du programme.
69-2457EFS-01.book Page 4 Monday, January 7, 2013 3:21 PM Fiche technique Alimentation : 120 Vca, 50 / 60 Hz Charge : 2400 watts, résistive ou inductive, 1 HP (moteur) Température de fonctionnement : -15 °C à 50 °C (5 °F à 122 °F) Température d’entreposage : -20 °C à 50 °C (-4 °F à 122 °F) Panne de courant : L'interrupteur est muni d'une pile rechargeable pour sauvegarder vos programmes lors d’une panne de courant. Cependant, l'écran est éteint durant la panne.
69-2457EFS-01.book Page 1 Monday, January 7, 2013 3:21 PM RPLS730B / RPLS731B Guía de instalación y uso Interruptor mural programable Descripción El interruptor mural programable RPLS730B / RPLS731B se utiliza para controlar dispositivos de alumbrado y motores.
69-2457EFS-01.book Page 2 Monday, January 7, 2013 3:21 PM 1) 2) 3) Encendido Levantar la tapa del interruptor con un pequeño destornillador. Asegurarse de que el selector ON/OFF esté en On. Presionar en Reinicialización con un sujetapapeles. 0:00 parpadeará en la pantalla. reinicialización botón de control (4) selector On/Off Si en la pantalla no apareciera nada: • Asegurarse de que el selector ON/OFF esté bien colocado en ON. Empujarlo a la derecha con un pequeño destornillador.
69-2457EFS-01.book Page 3 Monday, January 7, 2013 3:21 PM Programación Se pueden registrar hasta 7 programas. Para registrar un programa, debe definirse la hora de inicio (ON) y la hora de finalización (OFF). 1) Levantar la parte inferior de la tapa del interruptor con un pequeño destornillador. 2) Presionar el botón PGM para visualizar un programa, la hora de inicio (ON) y la hora de finalización (OFF).
69-2457EFS-01.book Page 4 Monday, January 7, 2013 3:21 PM Fiche technique Alimentación : 120 Vca, 50 / 60 Hz Carga : 2400 watts, resistive o inductiva, 1 HP (motor) Temperatura de funcionamiento : -15 °C a 50 °C (5 °F a 122 °F) Temperatura de almacenamiento : -20 °C a 50 °C (-4 °F a 122 °F) Corte de corriente : El interruptor tiene una pila recargable para salvaguardar los programas en caso de un corte de electricidad. Sin embargo, la pantalla se apaga durante el corte.