SDS

_____________________________________________________________________________________________
1200668 - CR2032
Revision Date 28-Jan-2015
Supplier Trade Secret TWA: 2 mg/m
3
respirable fraction
all forms except graphite fibers
TWA: 15 mg/m
3
total dust
synthetic
TWA: 5 mg/m
3
respirable fraction
synthetic
(vacated) TWA: 2.5 mg/m
3
respirable dust natural
(vacated) TWA: 10 mg/m
3
total
dust synthetic
(vacated) TWA: 5 mg/m
3
respirable fraction synthetic
TWA: 15 mppcf natural
IDLH: 1250 mg/m
3
TWA: 2.5 mg/m
3
respirable dust
Supplier Trade Secret TWA: 2 ppm -
Supplier Trade Secret TWA: 1.5 mg/m
3
TWA: 1 mg/m
3
(vacated) TWA: 1 mg/m
3
IDLH: 10 mg/m
3
TWA: 0.015 mg/m
3
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value OSHA PEL: Occupational Safety and Health
Administration - Permissible Exposure Limits Immediately Dangerous to Life or Health
Other Exposure Guidelines
Hexavalent Chrome may be formed during welding Vacated limits revoked by the Court of
Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962 (11th Cir., 1992) See section 15 for
national exposure control parameters
Appropriate engineering controls
Engineering Measures
Showers
Eyewash stations
Ventilation systems
Individual protection measures, such as personal protective equipment
Eye/Face Protection
If splashes are likely to occur:. Wear safety glasses with side shields (or goggles). None
required for consumer use.
Skin and Body Protection
Wear protective gloves and protective clothing. Long sleeved clothing. Impervious gloves.
None required for consumer use.
Respiratory Protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or
smoke when using this product. Avoid contact with skin, eyes or clothing. Wear suitable
gloves and eye/face protection. Do not breathe dust. Wash hands before breaks and
immediately after handling the product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical and Chemical Properties
Physical State
Solid
Appearance
Silver
Odor
Tar like
Color
No information available
Odor Threshold
No information available
Property Values Remarks Method
pH
No data available None known
Melting / freezing point
No data available None known
_____________________________________________________________________________________________
Boiling point / boiling range
No data available None known
Flash Point
No data available None known
Evaporation Rate
No data available None known
Flammability (solid, gas)
Page 6 / 14
No data available None known