69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 0 Monday, October 19, 2009 4:04 PM CAUTION: EQUIPMENT DAMAGE HAZARD To prevent possible compressor damage, do not use Cooling mode when the outdoor temperature is below 50°F (10°C). Need Help? For assistance with this product please visit http://DIYthermostats.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502. Read and save these instructions.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 1 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Table of contents Overview Appendices Thermostat features ..............................2 Quick start .............................................3 Quick reference to controls ...................4 Quick reference to display.....................5 Battery replacement ........................... 15 In case of difficulty .............................. 16 Customer assistance ..................
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 2 Monday, October 19, 2009 4:04 PM Operating Manual About your new thermostat Your new thermostat has been designed to give you many years of reliable service and easy-to-use, push-button climate control.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 3 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 This thermostat is ready to go Simply perform the three steps below and the thermostat is in operation: n o p Set the clock ................................................................................................ See page 6 Select whether to heat or cool......................................................................
9-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 4 Monday, October 19, 2009 4:04 PM Operating Manual Quick reference to controls Screen Lit for 12 seconds when you press any button. Up/Down buttons Press to adjust temperature. Press to set clock, day or schedule (see pages 6 & 11). System switch (see page 7) • Cool: System is in Cooling mode. • Off: System is off. • Heat: System is in Heating mode. Press to override schedule and hold temperature (see page 13).
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 5 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Quick reference to display Setpoint indicator Appears when the setpoint temperature is displayed. Temporary schedule override (see page 12) Low-battery warning (see page 15) Permanent schedule override (see page 13) Clock Temperature The ambient (measured) temperature is normally displayed. To view the setpoint temperature, press the Up or Down button once.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 6 Monday, October 19, 2009 4:04 PM Operating Manual Set the clock n o p q r Press the Set button. Set Time will appear on the screen and the time display will flash. Press the Up or Down button to set the time. Press the Set button again. Set Day will flash on the screen. Press the Up or Down button to select the day of the week. Press the Run button to save the changes & exit. (The changes are also saved if you do not press any button for 60 seconds.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 7 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 System switch (Heat/Cool) Use the System switch to place the system in one of the following modes: • Cool: System is in Cooling mode. • Off: System is off. • Heat: System is in Heating mode. CAUTION: EQUIPMENT DAMAGE HAZARD. Do not use Cooling mode when the outdoor temperature is below 50°F (10°C).
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 8 Monday, October 19, 2009 4:04 PM Operating Manual Fan switch (Auto/On) Use the Fan switch to select the fan operation. • Auto: The fan runs only when heating or cooling is activated (commonly used setting). • On: The fan runs continuously.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 9 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Using the schedule Press the Run button to follow the programmed schedule. For maximum energy savings while maintaining comfort, you can program the schedule such that the temperature is at an economical level when you sleep or leave for work and at a comfortable level when you are awake and at home.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 10 Monday, October 19, 2009 4:04 PM Operating Manual Energy Star® settings The thermostat has been programmed with ENERGY STAR® settings (see table below). See next page if you wish to modify the settings. Weekdays Saturday Sunday Period Start time Heat Cool Start time Heat Cool Start time Heat Cool Wake 6:00 AM 70°F (21°C) 78°F (25.5°C) 6:00 AM 70°F (21°C) 78°F (25.5°C) 6:00 AM 70°F (21°C) 78°F (25.5°C) Leave 8:00 AM 62°F (16.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 11 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Modifying the schedule n Press the Set button 3 times until Set Schedule appears. The Wake period is displayed. NOTE: To set another period, press the Set button as many times as needed until the desired period and the desired day(s) are displayed and its time or temperature is flashing. o p q r s t u When the time flashes, press the Up or Down button to set the time.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 12 Monday, October 19, 2009 4:04 PM Operating Manual Temporary override of schedule To temporarily ignore the schedule, press the Up or Down button until the desired temperature is displayed. The word Temporary will appear on the screen and the period display will flash to indicate that the current period has been overridden. The new temperature will be used until the next period begins.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 13 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Permanent override of schedule To permanently ignore the schedule, press the Up or Down button until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen. Press the Run button if you wish to cancel the override and resume the schedule.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 14 Monday, October 19, 2009 4:04 PM Operating Manual Adaptive Intelligent Recovery (AIR) Adaptive Intelligent Recovery™ allows the thermostat to “learn” how long your furnace or air conditioner takes to reach the set temperature. Simply program the desired times and desired temperatures into the schedule. The thermostat will determine when to activate heating or cooling so that the desired temperature is attained at the desired time.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 15 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Battery replacement Set the System switch to Off before removing the batteries. Otherwise, the heating/cooling system could remain activated even when batteries are removed. Install two fresh AAA batteries when Lo Batt flashes on the screen. Lo Batt appears for 60 days before the batteries are depleted. Replace batteries once a year, or when you will be away for more than a month.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 16 Monday, October 19, 2009 4:04 PM Operating Manual In case of difficulty Screen is blank. • Ensure two fresh AAA alkaline batteries are correctly installed. Temperature settings cannot be • The System switch is off. changed. • You are setting the temperature outside its allowable range: • Heat: 40°F to 90°F (4.5°C to 32°C) • Cool: 50°F to 99°F (10°C to 37°C) Cool On or Heat On is flashing. • The compressor protection delay is underway.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 17 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Customer assistance For assistance with this product, please visit http://DIYthermostats.honeywell.com. Or call Honeywell Customer Care toll-free at 1-800-468-1502. To save time, before calling, proceed as follows: 1) Loosen the locking screw at the bottom of the thermostat. Note that the screw is captive and cannot be removed from the wallplate.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 18 Monday, October 19, 2009 4:04 PM Operating Manual One-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 19 Monday, October 19, 2009 4:04 PM Programmable Thermostat RTH2410 Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT.
69-2383ES-01 (RTH2410 5-1-1 OM) ENG USA.fm Page 20 Monday, October 19, 2009 4:04 PM Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 http://DIYthermostats.honeywell.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 0 Monday, October 19, 2009 3:58 PM ADVERTENCIA: PELIGRO DE DAÑAR EL EQUIPO Para evitar posibles daños en el compresor, el termostato no se debe utilizar en Modo Enfriamiento cuando la temperatura exterior sea inferior a 50°F (10°C). ¿Asistencia? Para obtener asistencia relacionada con este producto, se recomienda visitar http://DIYthermostats.honeywell.com o llamar al número sin cargo del Servicio de Atención al Cliente de Honeywell: 1-800-468-1502.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 1 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Índice Generalidades Características del termostato...............2 Puesta en marcha rápida ......................3 Referencia rápida para los controles.....4 Referencia rápida para la pantalla ........5 Apéndices Reemplazo de las pilas ...................... 15 En caso de dificultades....................... 16 Asistencia al cliente ............................
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 2 Monday, October 19, 2009 3:58 PM Manual de usuario Información sobre el termostato Este nuevo termostato ha sido diseñado para brindar muchos años de funcionamiento fiable y permitir un control climático fácil de usar con sólo apretar un botón. Características • • • • • • • • Pantalla con luz de fondo de lectura fácil. Indica la temperatura ambiente (medida) en todo momento. Un sólo botón permite ver la temperatura del punto de ajuste.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 3 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 El termostato está listo para funcionar Basta con llevar a cabo las tres etapas siguientes para poner el termostato en marcha: n o p Ajustar el reloj. .................................................................................................. página 6 Seleccionar calefacción o enfriamiento.............................................................
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 4 Monday, October 19, 2009 3:58 PM Manual de usuario Referencia rápida para los controles Pantalla Se ilumina durante 12 segundos cuando se presiona cualquier botón. Presionar para ajustar el reloj, el día o el horario (ver las páginas 6 y 11). Botones Arriba/Abajo Presionar para ajustar la temperatura. Botón selector del sistema (ver la página 7). • Cool: Modo Enfriamiento. • Off: apagado. • Heat: Modo Calefacción.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 5 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Referencia rápida para la pantalla Indicador de punto de ajuste Aparece cuando se visualiza el punto de ajuste de la temperatura. Cancelación temporaria del horario (ver la página 12). Indicador de pilas débiles (ver la página 15). Cancelación permanente del horario (ver la página 13). Reloj Temperatura Indica normalmente la temperatura ambiente (medida).
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 6 Monday, October 19, 2009 3:58 PM Manual de usuario Ajuste del reloj n o p Presionar el botón Set. En la pantalla aparecerá Set Time y la hora parpadeará. Presionar el botón Arriba o Abajo para ajustar la hora. Presionar el botón Set otra vez. En la pantalla parpadeará Set Day. q Presionar el botón Arriba o Abajo para elegir el día de la semana. r Presionar el botón Run para salvaguardar los cambios y salir.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 7 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Conmutador del sistema (Calor/frío) Utilizar el conmutador del sistema para poner el termostato en uno de los modos siguientes: • Cool: el sistema está en Modo Enfriamiento. • Off: el sistema está apagado. • Heat: el sistema está en Modo Calefacción. ADVERTENCIA: PELIGRO DE DAÑAR EL EQUIPO No se debe usar el Modo Enfriamiento cuando la temperatura exterior es inferior a los 50°F (10°C).
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 8 Monday, October 19, 2009 3:58 PM Manual de usuario Botón selector del ventilador (Auto/On) Utilizar el conmutador del ventilador (Fan) para escoger el funcionamiento del ventilador. • Auto: el ventilador funciona únicamente cuando la calefacción o el enfriamiento están activados (ajuste más común). • On: el ventilador funciona continuamente.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 9 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Uso del horario Presionar el botón Run para seguir el horario programado. Para obtener una economía máxima conservando el confort, se puede programar el horario de manera que la temperatura esté en un nivel económico durante la noche y en un nivel confortable cuando los moradores están activos en casa.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 10 Monday, October 19, 2009 3:58 PM Manual de usuario Ajustes de Energy Star® Los ajustes de ENERGY STAR® están preprogramados en el termostato (ver el cuadro abajo). Referirse a la página siguiente si se desea modificarlos.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 11 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Modificación del horario n Presionar el botón Set 3 veces hasta que se vea Set Schedule. Aparece el período Despertar. NOTA: para fijar otro período, presionar el botón Set las veces necesarias hasta que el período y el día (o los dias) deseados aparezcan y sus horas y temperaturas parpadeen. o p q Cuando la hora parpadee, presionar Arriba o Abajo para ajustarla.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 12 Monday, October 19, 2009 3:58 PM Manual de usuario Cancelación temporaria del horario Para ignorar temporariamente el horario, presionar el botón Arriba o Abajo hasta que se vea la temperatura deseada en pantalla. Aparecerá el mensaje Temporary y el período en curso parpadeará para indicar que ha sido cancelado. La nueva temperatura estará vigente hasta que comience el próximo período.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 13 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Cancelación permanente del horario Para cancelar el horario de manera permanente, presionar el botón Arriba o Abajo hasta que aparezca en pantalla la temperatura deseada. Presionar entonces el botón Hold para mantener la nueva temperatura de manera indefinida. La palabra Hold aparecerá en la pantalla. Presionar el botón Run si se desea anular la cancelación y retomar el horario.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 14 Monday, October 19, 2009 3:58 PM Manual de usuario Adaptive Intelligent Recovery (AIR) Adaptive Intelligent Recovery™ permite que el termostato “aprenda” cuánto tiempo le lleva a la estufa o al aire acondicionado para alcanzar la temperatura deseada. Sólo hay que programar las horas y las temperaturas deseadas en el horario.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 15 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Reemplazo de las pilas Poner el conmutador del sistema en OFF antes de retirar las pilas. De lo contrario, el sistema de calefacción/enfriamiento puede permanecer activado aun cuando se hayan sacado las baterías. Instalar dos pilas AAA nuevas cuando Lo Batt parpadee en la pantalla. El icono aparecerá 60 días antes de que las pilas estén completamente descargadas.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 16 Monday, October 19, 2009 3:58 PM Manual de usuario En caso de dificultades No aparece nada en la pantalla. • Verificar que las dos pilas AAA estén cargadas y correctamente instaladas. No puede modificarse la temperatura. • El conmutador del sistema está apagado (Off). • La temperatura está fuera del margen permitido: • Calefacción: 40 °F a 90 °F (4,5 °C a 32 °C) • Enfriamiento: 50 °F a 99 °F (10 °C a 37 °C) Cool On o Heat On parpadean.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 17 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 Asistencia al cliente Para obtener asistencia con este producto, se recomienda visitar el sitio http:// DIYthermostats.honeywell.com o llamar al Servicio de Asistencia al Cliente de Honeywell al número sin cargo 1-800-468-1502. Para ahorrar tiempo, proceder de la siguiente manera antes de llamar: 1) Aflojar el tornillo en la base del termostato.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 18 Monday, October 19, 2009 3:58 PM Manual de usuario Garantía limitada de un año Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor, en condiciones normales de uso y servicio.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 19 Monday, October 19, 2009 3:58 PM Termostato programable RTH2410 La única responsabilidad de Honeywell será reparar o reemplazar el producto dentro de los plazos establecidos anteriormente. HONEYWELL NO RESPONDERÁ POR LA PÉRDIDA O DAÑO DE NINGÚN TIPO, INCLUIDO EL DAÑO INCIDENTAL O INDIRECTO DERIVADO, DIRECTA O INDIRECTAMENTE, DEL INCUMPLIMIENTO DE LAS GARANTÍAS, EXPRESAS O IMPLÍCITAS, O DE OTRAS FALLAS DE ESTE PRODUCTO.
69-2383ES-01 (RTH2410 5-1-1 OM) SPA USA.fm Page 20 Monday, October 19, 2009 3:58 PM . Sistemas para automatización y control Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 http://DIYthermostats.honeywell.com Impreso en EE.UU.