RTH2410 Thermostat Manual

5 Mount Wallplate

Mount the new wallplate using the included screws and anchors.

Drill 3/16-in. holes for drywall

Drill 3/32-in. holes for plaster

6 Connect Wires

Simply match wire labels.

If labels do not match letters on the thermostat, check “Alternate Wiring

(Conventional Systems)” on page 6 and connect to terminal as shown (see

notes, below).

Maximum load: 1 A @ 24 Vac, 50/60HZ per output.

We are here to help. Call 18004681502 for wiring assistance.

Aux

Not

Used

M32714

Remove metal

jumper if you

have both R and

Rc wires.

M32732

SCREW

INSERT WIRES

AND TIGHTEN

SCREWS

WIRE

HOLE

LABELED

WIRES

Not

Used