Use and Care Manual

ManualsBrandsHoneywell ManualsHeatingT4 PRO 5-Day to 2-Day Programmable Thermostat 1/Heat 1/Cool - (2-Pack)

Program Schedule

To adjust program schedules

You can program four time periods each day, with different settings for weekdays

and weekends. We recommend the pre-sets (shown in the table below), since they

can reduce your heating/cooling expenses.

Wake - Set to the time you wake up and the

temperature you want during the morning, until

you leave for the day.

Away - Set to the time you leave home and the

temperature you want while you are away (usually

an energy-saving level).

Home - Set to the time you return home and the

temperature you want during the evening, until

bedtime.

Sleep - Set to the time you go to bed and the

temperature you want overnight (usually an

energy-saving level).

NOTE: To temporarily or permanently override any of the above program

schedules, see page 4.

1 Press Menu on your thermostat.

2 PROG is displayed. Press Select. Then ON

is displayed. (If you do not want to use a

schedule, press or to display OFF. Press

Select.) Press Select.

3 Press or to select day or set of days to

edit. Press Select.

4 Press or to select a schedule period to

edit (Wake, Away, Home, and Sleep). Press

Select.

5 ON is displayed. Press Select to keep the

schedule period on. Or press and then Select

to turn off the schedule period.

6 Time starts blinking. Press or to adjust

the schedule period start time. Press Select.

7 Temperature starts blinking. Press or

to adjust the “Heat” setpoint temperature.

Press Select. Press or to adjust the “Cool”

temperature setpoint. Press Select.

8 Repeat steps 4 through 7 for the remaining

schedule periods.

9 Press Home when you’re finished to save and

return to the home screen.

10 Schedule can be adjusted and turned ON or

OFF by returning to Menu and following the

steps provided above.

Heat Cool

Wake

(6:00 am)

Away

(8:00 am)

Home

(6:00 pm)

Sleep

(10:00

pm)