Operating Manual RTH6350/RTH6450 Series Programmable Thermostat 69-2415ES-03
This manual covers the RTH6350 and RTH6450 models. Quick Reference Card Battery Holder Grasp and pull to see basic operating instructions at a glance. Press down and pull to remove batteries. Batteries should be replaced once a year (see page 15). M28400 NOTE: Remove battery holder; model number is on the battery holder. Need Help? For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 Read and save these instructions.
RTH6350/RTH6450 Series About of Table your contents new thermostat About your new thermostat Appendices Thermostat features.................................... 2 Programming at a glance........................... 3 Quick reference to controls........................ 4 Quick reference to display......................... 5 Battery installation.................................... 19 Customer assistance................................ 20 In case of difficulty...................................
Operating Manual About your new thermostat Congratulations on the purchase of your new Honeywell thermostat. It has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features • Easy-to-follow menu programming. • One-touch temp control overrides program schedule at any time. • Large, clear, backlit display is easy to read — even in the dark. • Displays both room temperature and temperature setting. • Removable battery holder for fast, easy replacement.
RTH6350/RTH6450 Series This thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1. Set time and day (required for proper operation)..........................See page 6 2. Select fan setting (Auto/On): Preset to Auto..................To change, see page 7 3. Select system setting (Heat/Cool): Preset to Heat.......To change, see page 8 4.
Operating Manual Quick reference to controls Digital display (see page 5). Battery holder (see page 15). Temperature buttons Press to adjust temperature settings (see pages 11-13). M28401 Hold button Press to override programmed temperature control (see page 13). Function buttons Press to select the function displayed just above each button. (Functions change depending on the task.
RTH6350/RTH6450 Series Quick reference to display screen Low battery warning (see page 15) Current inside temperature Smart Response technology in effect (see page 17) Current time/day (see page 6) ® Current program period Wake/Leave/Return/Sleep (see pages 9-11) Set clock/day/schedule Press to set time, day or program schedules (see pages 6 & 11) Inside Heat Setting Replace Battery 75 In Recovery Wake Set Clock/Day/ Schedule 6:30 75 AM Heat On Wed Fan Auto System Heat Function buttons Pr
Operating Manual Set the time and day 1. Press the SET CLOCK/DAY/SCHEDULE button, then press s or t to set the clock time. Press SET CLOCK/DAY/SCHEDULE, then adjust time Set Clock/Day/ Schedule 4:30 PM Fan Auto System Heat 2. Press the SET DAY button, then press s or t to select the day of the week. M28403 Press SET DAY, then select current day Note: If the SET CLOCK/DAY/SCHEDULE option is not displayed, press DONE or RUN SCHEDULE.
RTH6350/RTH6450 Series Select the fan setting Set Clock/Day/ Schedule Fan Auto Press the FAN button to select Auto or On. System Heat M28405 Set Clock/Day/ Schedule Fan In “Auto” mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to “On,” the fan runs continuously.
Operating Manual Select the system setting Set Clock/Day/ Schedule Fan Auto Press the SYSTEM button to select Heat, Cool or Off. System Heat • Heat: Thermostat controls only the heating system. M28407 Set Clock/Day/ Schedule Fan Auto System Cool • Cool: Thermostat controls only the cooling system. • Off: Heating and cooling systems are off. • Auto (RTH6450 only): Thermostat automatically selects heating or cooling depending on the indoor temperature. M28408 CAUTION: EQUIPMENT DAMAGE HAZARD.
RTH6350/RTH6450 Series Save money by setting program schedules It’s easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays, Saturday and Sunday. WAKE 6:00 am Set to the time you awaken and the temperature you want during the morning, until you leave for the day. LEAVE 8:00 am Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Operating Manual Energy-saving settings for maximum cost savings This thermostat is pre-set with energy-saving program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period.
RTH6350/RTH6450 Series To adjust program schedules (RTH6350 only) Set Clock/Day/ Schedule Fan Auto System Heat Done Set Day Set Schedule Heat Setting Set Schedule 8:00 AM 62 Leave Mon Tue Wed Thu Fri Done CancelPeriod Next 1. Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. 2. Press s or t to set your weekday Wake time (Mon–Fri), then press NEXT. 3. Press s or t to set the temperature for this time period, then press NEXT. 4. Set time and temperature for the next time period (Leave).
Operating Manual About To adjust your program new thermostat schedules (RTH6450 only) Set Clock/Day/ Schedule Fan Auto System Heat Done Set Day Set Schedule Heat Setting Set Schedule 8:00 AM 62 Leave Mon Tue Wed Thu Fri Done CancelPeriod Next 69-2415ES—03 M28409 1. Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. 2. Press s or t to set your weekday Wake time (Mon–Fri), then press NEXT. 3. Press s or t to set the temperature for this time period, then press NEXT. 4.
RTH6350/RTH6450 Series About your Program schedule new thermostat override (temporary) Press to temporarily adjust temperature. Temporary Inside 69 Run Schedule 6:30 Fan Auto AM Press s or t to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. Heat Setting 75 System Heat M28410 Press to cancel temporary setting and resume program schedule.
Operating Manual About your Program schedule new thermostat override (permanent) Press to permanently adjust temperature. Inside 69 Run Schedule Hold 6:30 Fan Auto AM Press HOLD to permanently adjust the temperature. This will override the temperature settings for all time periods. Heat Setting 75 The “Hold” feature turns off the program schedule and allows you to adjust the thermostat manually, as needed. System Heat M28411 Press to cancel “Hold” setting and resume program schedule.
RTH6350/RTH6450 Series AboutChangeover Auto your new thermostat (RTH6450 only) Use this feature in climates where both air conditioning and heating are used on the same day. When the system mode is in Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature.
Operating Manual AboutChangeover Auto your new thermostat (RTH6450 only) If the cool temperature is lowered to where it gets close to the heat setting, an arrow next to heat will show the thermostat is lowering the heat setting down to maintain a 3-degree separation. Temporary Heat Setting Inside 73 Run Schedule 1:05 Fan Auto PM 73 Cool Select Heat/Cool The triangle indicates the cool temperature is increasing to maintain 3 degrees between heat and cool settings.
RTH6350/RTH6450 Series About your Built-in compressor new thermostat protection Cool Setting Inside 75 Set Clock/Day/ Schedule 6:30 Fan Auto AM 75 Cool On System Cool M28412 Message flashes until safe restart time has elapsed. This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is re-started too soon after shutdown. This feature forces the compressor to wait a few minutes before restarting.
Operating Manual About your Smart Response new thermostat Technology ® Cool Setting Inside 75 In Recovery Set Clock/Day/ Schedule 6:38 Fan Auto AM 75 Cool On System Cool M27476 Displays when Smart Response is active. 69-2415ES—03 Smart Response Technology: This feature ® allows the thermostat to “learn” how long the furnace and air conditioner take to reach programmed temperature settings, so the temperature is reached at the time you set.
RTH6350/RTH6450 Series Battery replacement Press down and pull to remove. Install fresh batteries immediately when the REPLACE BATTERY warning begins flashing. The warning flashes about two months before the batteries are depleted. Replace Battery Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month. M28413 Insert fresh AA alkaline batteries, then reinstall battery holder.
Operating Manual Customer assistance For assistance with this product, please visit http://yourhome.honeywell.com. Or call Honeywell Customer Care toll-free at 1-800-468-1502. M28415 Model number xxxxxxx Date code xxxxxxx To save time, please remove the battery holder and note your model number and date code before calling. Accessories/replacement parts To order, please call Honeywell Customer Care toll-free at 1-800-468-1502. Battery holder..................... Part No.
RTH6350/RTH6450 Series About In caseyour of difficulty new thermostat If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank Temperature settings do not change • Make sure fresh AA alkaline batteries are correctly installed (see page 15). Make sure heating and cooling temperatures are set to acceptable ranges: • Heat: 40° to 90°F (4.5° to 32°C). • Cool: 50° to 99°F (10° to 37°C).
Operating Manual About In caseyour of difficulty new thermostat Heating or cooling system does not respond • Press SYSTEM button to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM button to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely.
RTH6350/RTH6450 Series About your 1-year limited new warranty thermostat Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Operating Manual About your 1-year limited new warranty thermostat THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
RTH6350/RTH6450 Series 25 69-2415ES—03
Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Toronto, Ontario M1V 4Z9 ® U.S. Registered Trademark. © 2011 Honeywell International Inc. 69-2415ES—03 M.S. Rev. 03-11 Printed in U.S.A.
Manual de funcionamiento Serie RTH6350/RTH6450 Termostato programable 69-2415ES-03
Este manual cubre los modelos RTH6350 y RTH6450. Tarjeta de referencia rápida Soporte de la batería Presione el soporte y tire de él para quitar las baterías. Las baterías deben ser reemplazadas una vez al año (vea la página 15). Sujete la tarjeta y tire de ella para ver rápidamente las instrucciones de funcionamiento básicas. M28400 NOTA: Retire el soporte de la batería; el número de modelo está en el soporte de la batería.
Serie RTH6350/RTH6450 Acerca de su nuevo termostato Índice Acerca de su nuevo termostato Apéndices Características del termostato..................... 2 Programación rápida.................................... 3 Rápida referencia de los controles.............. 4 Rápida referencia de la pantalla.................. 5 Instalación de la batería............................. 19 Ayuda al cliente.......................................... 20 En caso de inconvenientes........................ 21 Garantía limitada...
Manual de funcionamiento Acerca de su nuevo termostato Felicitaciones por la compra del nuevo termostato Honeywell. El termostato ha sido diseñado para brindarle muchos años de funcionamiento confiable y para brindarle un control climático fácil de usar y con sólo apretar un botón. Características • Programación con menú fácil de seguir. • El control de temperatura al tacto anulará la configuración del programa en cualquier momento.
Serie RTH6350/RTH6450 ¡Este termostato está listo para funcionar! Su nuevo termostato está preprogramado y listo para funcionar. Todo lo que tiene que hacer es configurar el día y la hora. Luego, revise las configuraciones de abajo y cámbielas si es necesario: 1. Configure la hora y el día (necesario para un mejor funcionamiento)............................................................................Vea la página 6 2.
Manual de funcionamiento Rápida referencia de los controles Pantalla digital (vea la página 5). Soporte de la batería (vea la página 15). Botones de la temperatura Presiónelos para ajustar las configuraciones de temperatura (vea las páginas 11 a 13). M28401 Botones de funcionamiento Presiónelos para elegir la función que se muestra justo debajo de cada botón. (Las funciones cambian según la tarea).
Serie RTH6350/RTH6450 Rápida referencia de la pantalla Temperatura interior actual Tecnología Smart Response en funcionamiento (ver página 17) Hora y día actuales (vea la página 6) Configuración de temperatura (vea las páginas 11 a 13) Aviso de batería baja (vea la página 15) ® Período de programación actual “Wake/Leave/Return/Sleep” (horas en que se despierta, se va de su casa, regresa y se duerme); (vea las páginas 9 a 11) Ajuste “clock/day/schedule” Presione estos botones para configurar la hora, el
Manual de funcionamiento Configure la hora y el día Presione “SET CLOCK/DAY/SCHEDULE”, luego ajuste la hora Set Clock/Day/ Schedule 4:30 PM Fan Auto System Heat 2. Presione el botón “SET DAY” (configuración del día), luego, presione s o tpara configurar la hora del reloj. M28403 Presione “SET DAY” y luego seleccione el día actual Done 69-2415ES—03 3. Presione “DONE” (listo) para guardar y salir.
Serie RTH6350/RTH6450 Seleccione la configuración del ventilador Set Clock/Day/ Schedule Fan Auto Presione el botón “FAN” para seleccionar “Auto” o “On”. System Heat En el modo “Auto”, la configuración usada comúnmente, el ventilador funciona solamente cuando la calefacción o el sistema de enfriamiento están encendidos. Si se fija en “On”, el ventilador funciona sin interrupción.
Manual de funcionamiento Seleccione la configuración del sistema Set Clock/Day/ Schedule Fan Auto System Heat Fan Auto System M28407 Set Clock/Day/ Schedule Cool M28408 Nota: Quizás la configuración Auto (automático) del sistema no aparezca, dependiendo de como haya sido instalado el termostato. 69-2415ES—03 Presione el botón “SYSTEM” para seleccionar “Heat”, “Cool” o “Off”. • “Heat”: El termostato controla solamente el sistema de calefacción.
Serie RTH6350/RTH6450 Ahorre dinero configurando los cronogramas del programa Es fácil programar su sistema que permite un ahorro máximo de energía. Usted puede programar cuatro períodos de tiempo por día, con diferentes configuraciones para los días de semana, sábado y domingo. Programe la hora en que se despierta y la temperatura que quiere “WAKE” durante la mañana, hasta que usted se va de su casa. 6:00 a. m. 70 ° “LEAVE” 8:00 a. m.
Manual de funcionamiento Configuraciones de ahorro de energía para máximo ahorro de costos Este termostato viene predeterminado con configuraciones para un programa de ahorro de energía. Recomendamos estas configuraciones debido a que reducen los gastos de calefacción y enfriamiento hasta en un 33%. Vea la siguiente página para ajustar las horas y las temperaturas de cada período de tiempo.
Serie RTH6350/RTH6450 Para ajustar los cronogramas del programa (RTH6350) Set Clock/Day/ Schedule Fan Auto System Heat Done Set Day Set Schedule Heat Setting Set Schedule 8:00 AM 62 Leave Mon Tue Wed Thu Fri Done 1. Presione “SET CLOCK/DAY/SCHEDULE” y luego “SET SCHEDULE”. 2. Presione s o t para configurar la hora en que se despierta los días de la semana (de lunes a viernes), luego presione “NEXT”. 3.
Manual de funcionamiento Acerca Para ajustar de sulos nuevo cronogramas termostato del programa (RTH6450) Set Clock/Day/ Schedule Fan Auto System Heat Done Set Day Set Schedule Heat Setting Set Schedule 8:00 AM 62 Leave Mon Tue Wed Thu Fri Done CancelPeriod Next 69-2415ES—03 M28409 1. Presione “SET CLOCK/DAY/SCHEDULE” y luego “SET SCHEDULE”. 2. Presione s o t para configurar la hora en que se despierta los días de la semana (de lunes a viernes), luego presione “NEXT”. 3.
Serie RTH6350/RTH6450 Acerca de la Programe suanulación nuevo termostato del cronograma (temporario) Presione para ajustar temporariamente la temperatura. Temporary Inside 69 Run Schedule 6:30 Fan Auto AM Heat Setting 75 Presione s o t para ajustar la temperatura en forma inmediata. Esto anulará temporariamente la configuración de la temperatura para el período de tiempo actual. La nueva temperatura se mantendrá solamente hasta que comience el próximo período programado (vea la página 10).
Manual de funcionamiento Acerca de la Programe suanulación nuevo termostato del cronograma (permanente) Presione para ajustar permanentemente la temperatura. Inside 69 Run Schedule Hold 6:30 Fan Auto AM Heat Setting 75 La función “Hold” apaga el cronograma del programa y le permite ajustar el termostato manualmente, según sea necesario. System Heat M28411 Presione para anular la configuración “Hold” y volver al cronograma del programa.
Serie RTH6350/RTH6450 Acerca de su nuevo termostato Conversión automática (RTH6450 solamente) Utilice esta característica en climas donde se utilicen tanto el aire acondicionado como la calefacción durante el mismo día. Cuando el sistema está configurado en Auto (automático), el termostato elige automáticamente cuándo calentar o enfriar, dependiendo de la temperatura interior.
Manual de funcionamiento Acerca de su nuevo termostato Conversión automática (RTH6450 solamente) Si la temperatura fría desciende a donde queda cercana a la configuración de calefacción, una flecha al lado del calor mostrará que el termostato está bajando la configuración de calor para mantener una separación de 3 grados.
Serie RTH6350/RTH6450 Acerca de su Protección delnuevo compresor termostato incorporado Cool Setting Inside 75 Set Clock/Day/ Schedule 6:30 Fan Auto 75 AM Cool On System Cool M28412 El mensaje titila hasta que haya transcurrido el tiempo de reinicio de seguridad. Esta función ayuda a prevenir el daño del compresor en su acondicionador de aire o en su sistema de bomba de calor. El compresor puede dañarse si se vuelve a iniciar inmediatamente después de ser apagado.
Manual de funcionamiento Acerca de su Tecnología Smart nuevo Response termostato ® Cool Setting Inside 75 In Recovery Set Clock/Day/ Schedule 6:38 Fan Auto AM 75 Cool On System Cool M27476 Tecnología Smart Response : Permite que el termostato “aprenda” cuánto tiempo les lleva a la estufa y al acondicionador de aire alcanzar la temperatura programada, de modo que se alcance la temperatura a la hora fijada. Por ejemplo, fije la hora de levantarse a las 6 AM y la temperatura a 70°.
Serie RTH6350/RTH6450 Reemplazo de la batería Presione el soporte y tire de él para quitar. Replace Battery Instale las baterías nuevas inmediatamente cuando la advertencia “REPLACE BATTERY” (reemplazo de baterías) comience a titilar. La advertencia titilará durante alrededor de dos meses antes de que se consuman las baterías. Aunque la advertencia no aparezca, deberá reemplazar las baterías una vez por año o antes de abandonar el hogar por más de un mes.
Manual de funcionamiento Acercaaldecliente su nuevo termostato Ayuda Para obtener asistencia relacionada con este producto, visite http://yourhome.honeywell.com. O comuníquese con el número gratuito de Atención al cliente de Honeywell 1-800-468-1502. M28415 Número de modelo xxxxxxx Para ahorrar tiempo, anote el número de modelo y el código de fecha antes de llamar.
Serie RTH6350/RTH6450 Acerca En casode desu inconvenientes nuevo termostato Si tiene dificultades con el termostato, intente seguir las sugerencias que se indican a continuación. La mayoría de los problemas pueden corregirse rápida y fácilmente. La pantalla está vacía • Asegúrese de que las baterías AA alcalinas estén instaladas correctamente (vea la página 15).
Manual de funcionamiento Acerca En casode desu inconvenientes nuevo termostato El sistema de calefacción o enfriamiento no responde • Presione el botón “SYSTEM” para configurar el sistema en “Heat”. Asegúrese de que la temperatura sea más alta que la temperatura interna. • Presione el botón “SYSTEM” para configurar el sistema en “Cool”. Asegúrese de que la temperatura sea más baja que la temperatura interna. • Controle el interruptor de circuito y, si es necesario, reinícielo.
Serie RTH6350/RTH6450 Acerca delimitada Garantía su nuevo de termostato 1 año Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor. Si en cualquier momento durante el período de garantía se verifica que el producto tiene un defecto o que funciona mal, Honeywell lo reparará o reemplazará (a elección de Honeywell).
Manual de funcionamiento Acerca delimitada Garantía su nuevo de termostato 1 año DERIVADO, DIRECTA O INDIRECTAMENTE, DEL INCUMPLIMIENTO DE LAS GARANTÍAS, EXPRESAS O IMPLICÍTAS, O DE OTRAS FALLAS DE ESTE PRODUCTO. Algunos estados no permiten la exclusión o limitación del daño incidental o indirecto, entonces, esta limitación puede no resultar aplicable a su caso. LA PRESENTE GARANTÍA ES LA ÚNICA GARANTÍA EXPRESA QUE HONEYWELL PROPORCIONA RESPECTO DE ESTE PRODUCTO.
Serie RTH6350/RTH6450 25 69-2415ES—03
Soluciones para automatización y control Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Toronto, Ontario M1V 4Z9 ® Marca registrada de los EE. UU. © 2011 Honeywell International Inc. 69-2415ES—03 M.S. Rev. 03-11 Impreso en EE. UU.