User Guide Wi-Fi Programmable Thermostat RTH6500WF Wi-Fi Series
In the box you will find • • • • • • • • Thermostat Wallplate (attached to thermostat) Screws and anchors Quick Start Guide Thermostat ID Card Wire labels User Guide Quick Reference Card 69-2718EF—03 ii
Welcome Congratulations on your purchase of a Honeywell Wi-Fi programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go. Honeywell’s Total Connect Comfort is the perfect solution if you travel frequently, own a vacation home, a business or manage an Investment property or if you are simply looking for peace of mind.
This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat. MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.
Table of contents About your new thermostat Controls and Home screen quick reference............................................. 5 Preset energy-saving schedules.................. 6 Installation Installing your thermostat............................. 8 Connecting to your Wi-Fi network.............. 26 Registering your thermostat online............ 31 Operation Setting the the time and day...................... 36 Setting the fan............................................ 37 Selecting system mode.....
Features of your Wi-Fi thermostat With your new thermostat, you can: • Connect to the Internet to monitor and control your heating/cooling system • View and change your heating/cooling system settings • View and set temperature and schedules • Receive alerts via email and get automatic upgrades Your new thermostat provides: • Smart Response Technology • Compressor protection • Heat/cool auto changeover 69-2718EF—03 4
Controls and home screen quick reference Once your Wi-Fi thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it. Set up messages describe steps in the Wi-Fi set up process Wi-Fi status HOLD Temperature adjustment buttons Permanent override button M31586 Set clock, day, or schedule Select fan settings Select system mode Additional settings The screen lights when you press any button.
Preset energy-saving schedules This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses if used as directed. Savings may vary depending on geographic region and usage. To change the settings, see pages 39–41.
Setting up your thermostat Setting up your Wi-Fi programmable thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered. 1 Install your thermostat. 2 Connect your home Wi-Fi network. 3 Register online for remote access. Before you begin, you may want to watch a brief installation video. Use the QR Code at the front of this guide, or go to wifithermostat.
Installing your thermostat You might need the following tools to install this thermostat: • • • • o. 2 Phillips screwdriver N Small pocket screwdriver Pencil Level (optional) • D rill and bits (3/16” for drywall, 7/32” for plaster) (optional) • Hammer (optional) • Electrical tape (optional) 1 Switch OFF power to your heating/cooling system. or Important! To protect your equipment, switch OFF the power to your heating/ cooling system at the breaker box or the system switch.
Installing your thermostat 2 Remove old thermostat faceplate and leave wires connected. 2a Take a picture of the wire connections for later reference. 2b If no wire is connected to a terminal labeled C or no C terminal exists on the old thermostat, view the Alternate Wiring videos at wifithermostat.com/videos Important! C wire is required and is the primary power source for your thermostat. Without a C wire, your thermostat will not power up.
Installing your thermostat 3 Label wires. Do not label by wire color.Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color. Sticky tags Blank sticky tags Note: If no tag matches a wire terminal label, write the terminal label on a blank tag. 4 Remove wallplate. Remove the old wallplate from the wall after all wires have been labeled and disconnected.
Installing your thermostat 5 Separate Wi-Fi thermostat and its wallplate. On your new thermostat, grasp the finger holds on the top and bottom of the wallplate with one hand and the thermostat (front) with the other hand. Pull pieces apart.
Installing your thermostat 6 Mount wallplate for Wi-Fi thermostat. Mount your new wallplate using screws and anchors included with the thermostat. If necessary: Wallplate Drill 3/16-in holes for drywall. Drill 7/32-in holes for plaster. Note: You may be able to use your existing wall anchors.
Installing your thermostat Important! The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you don’t have a C wire, try: • Looking for an unused wire that is pushed into the wall. Connect that wire to C and check that it is connected to the 24 VAC common at your heating/cooling system. Note: Not all heating/cooling systems label the 24 VAC common C.
Installing your thermostat Wiring (conventional system) Remove metal jumper only if you have both 7A Wire the Wi-Fi thermostat to your conventional system. R and RC wires a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. See page 13. b Loosen screw, insert wire on inside edge G W C Y R of terminal, then tighten screw. K Y2 W2 G W C Y R RC CONVENTIONAL c Verify wire is firmly secured by gently pulling on wire.
Installing your thermostat Wiring (heat pump system only) Labels don’t match? See alternate wiring key on pages 18–19. 7B Wire Wi-Fi thermostat to your heat pump. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. See page 13. b Loosen screw, insert wire on inside edge of terminal, then tighten screw. c Verify wire is firmly secured by gently G O Y R Aux pulling on wire. d Repeat steps a–c for all other wires.
Installing your thermostat Alternate wiring (conventional system) Use this if your wire labels don’t match the terminal labels. 2 Y2 W2 G Note: You must have a C wire or equivalent. See page 13. W F C W1 H X B C1 Y Y1 M R RH 4 V RC R 1 K Y2 W2 G W C Y R RC CONVENTIONAL 3 MCR33885 See key to 1 – 3 on page 17.
Installing your thermostat Alternate wiring key (conventional system) 1 Do not use K terminal. For future use. 2 If your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the RC terminal, and the RH wire to the R terminal. 3 Remove metal jumper connecting R and RC only if you must connect both R and RC.
Installing your thermostat Alternate wiring (heat pump system only) Use this if your wire labels don’t match the terminal labels. 3 2 Note: You must have a C wire or equivalent. See page 13. L E AUX F X X2 W W1 W2 G 4 4 5 6 O C Y R F H B X B Y1 M V VR RC R 1 7 K L AUX/E G O/B C Y R RC HEAT PUMP MCR33886 69-2718EF—03 18 See key to 1 – 7 on page 19.
Installing your thermostat Alternate wiring key (heat pump system only) 1 Do not use K terminal. For future use. 2 If old thermostat has separate wires on AUX and E, place both wires into the E/AUX terminal. If old thermostat has wire on AUX with a jumper to E, place wire on E/AUX terminal. No jumper is required. 3 If your old thermostat had an O wire and not a B wire, attach the O wire to the O/B terminal. 4 If your old thermostat had separate O and B wires, attach the B wire to the C terminal.
Installing your thermostat 8 Insert quick reference card. Quick reference card Fold quick reference card along score lines, and slide it into the slot on the back of the thermostat.
Installing your thermostat 9 Attach thermostat to wallplate. Align the thermostat to the wallplate and then snap into place.
Installing your thermostat 10 Switch heating/cooling system ON. Important! 10a Verify that the C wire is connected at the thermostat and at the heating/cooling system. or 10b Make sure the heating/ cooling system door is firmly secured. 10c Switch power back ON for your heating/cooling system at the breaker box or its power switch.
Installing your thermostat 11 Set clock to current day and time. 11a Press s or t to set clock. 11b Press Set Day. HOLD 11c Press s or t to select the day of week. 11d Press Done to save. MCR33908 (Press and hold a st button to quickly change a setting.
Installing your thermostat 12 Determine your heating/cooling system type. Important! Heating/cooling system type must be set so that your thermostat operates properly and does not damage your system. 12a If your system type is conventional single stage (natural gas-powered single stage with a/c), continue to “Connecting to your Wi-Fi network” on page 26.
Installing your thermostat Congratulations! Your thermostat is operational. 13 Test your thermostat 13a Press the System button to change to heating or cooling and begin operation. 13b For remote access to your thermostat, continue to “Connecting to your Wi-Fi network” on page 26. MCR33880 Heating/cooling system not turning on? Refer to page 62 or FAQ at wifithermostat.
Connecting to your Wi-Fi network To complete this process, you must have a wireless device connected to your home wireless network. Any of these device types will work: • Tablet (recommended) • Laptop (recommended) • Smartphone If you get stuck... at any point in this procedure, restart the thermostat by removing the thermostat from the wallplate, wait for 10 seconds, and snap it back onto the wallplate. Go to Step 1 in this procedure, starting on page 27.
Connecting to your Wi-Fi network 1 Connect to your thermostat. 1a Make sure the thermostat displays Wi-Fi Setup. 1b On the wireless device (laptop, tablet, smartphone), view the list of available Wi-Fi networks. 1c Connect to the network called NewThermostat_123456 (the number will vary). HOLD M33852 Note: If you are asked to specify a home, public, or office network, select Home Network.
Connecting to your Wi-Fi network 2 Join your home network. 2a Open your web browser to access the Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1 2b Find the name of your home network on this page and select it. 2c Complete the instructions for joining your Wi-Fi network and click on the Connect button. (Depending on your network setup, you may see an instruction such as Enter Password for your home network.
Connecting to your Wi-Fi network Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page: • Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks. • If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list.
Connecting to your Wi-Fi network 3 Make sure your thermostat is connected. While the connection is in process, your thermostat will flash Wait for up to 3 minutes. When the connection is complete, the display will show Wi-Fi Setup Connection Success. The Wi-Fi signal strength will appear in the top-right corner. M33875 After about 60 seconds, the home screen will appear and Register at Total Connect will flash until registration is complete. If you don’t see these messages, see page 26.
Registering your thermostat online To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps. 1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com M31570 View the Wi-Fi Thermostat Registration video at wifithermostat.
2 Login or create an account. If you have an account, click Login – or – click Create An Account. 2a Follow the instructions on the screen. 2b Check your email for an activation message from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your junk mailbox or use an alternate e-mail address. 2c Follow activation instructions in the email. 2d Log in.
Registering your thermostat online 3 Register your Wi-Fi thermostat. After you are logged in to your Total Connect Comfort account, register your thermostat. 3a Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostat’s unique identifiers: • MAC ID • MAC CRC Note: These IDs are listed on the Thermostat ID Card included in the thermostat package. The IDs are not case sensitive.
Registering your thermostat online 3b When the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message. In the thermostat display, you will see Setup Complete for about 90 seconds.
Registering your thermostat online 3c Also notice that your thermostat displays its signal strength. Congratulations! You’re done. You can now control your thermostat from anywhere through your tablet, laptop, or smartphone Total Connect Comfort free app is available for Apple iPhone , iPad and iPod touch devices at iTunes or at Google Play for all Android™ devices.
Setting the time and day 1 Press Set Clock/Day/Schedule, then press s or t to set clock. 2 Press Set Day, then press s or t to select the day of week. HOLD 3 Press Done to save. Note: If the Set Clock/Day/Schedule option is not displayed, press Done. Note: If the display flashes Set Clock, the thermostat will follow your settings for the Monday “Wake” time period until you reset the time and day.
Setting the fan Press Fan to select On or Auto (toggle to re-select). Auto: Fan runs only when the heating or cooling system is on. Auto is the most commonly used setting. On: Fan is always on. Note: Options may vary depending on your heating/cooling equipment.
Selecting system mode Press System to select: Heat: Controls only the heating system. Cool: Controls only the cooling system. Off: Heating/cooling systems are off. Auto: Selects heating or cooling depending on the indoor temperature. Em Heat (heat pumps with aux. heat): Controls auxiliary/emergency heat. Compressor is off. 69-2718EF—03 38 MCR33880 Note: Depending on how your thermostat was installed, you may not see all system settings.
Adjusting program schedules 1 Press Set Clock/Day/Schedule, then Set Schedule. 2 Press s or t to set your Monday (Mon) Wake time, then press Next. 3 Press s or t to set the temperature for this period, then press Next. 4 Set time and temperature for the next time period (Leave). Repeat Steps 2 and 3 for each time period. 5 Press Next to set time periods for the next day. Repeat Steps 2 through 4 for each day. 6 Press Done to save and exit.
Overriding schedules temporarily Press s or t to immediately adjust the temperature. The new temperature will be maintained only until the next programmed time period begins. To cancel the temporary setting at any time, press Cancel. The program schedule will resume.
Overriding schedules permanently 1 Press HOLD to permanently adjust the temperature. This will turn off the program schedule. 2 Press s or t to adjust the temperature setting.
Unregistering thermostat If you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), the thermostat will display Register at Total Connect until it is re-registered.
Disconnecting Wi-Fi Replacing your router If you disconnect the thermostat from your Wi-Fi network: 1 Enter system setup (see page 48). 2 Change setting 39 to 0 (see page 54). M33855 The screen will display Wi-Fi Setup. Re-connect to a Wi-Fi network by following the steps on page 26. Turning Wi-Fi off If you do not plan to control the thermostat remotely, you can remove the Wi-Fi Setup message from the screen: 1 Enter system setup (see page 48). 2 Change setting 38 to 0 (see page 54).
Software updates Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs. While the update is taking place, your thermostat screen flashes Updating and shows the percentage of the update that has occurred. When the update is complete, your home screen will appear as usual.
Smart Response Technology This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before 6:00 am, so the temperature is 70° by 6:00 am. Note: System setting function 13 controls Smart Response Technology. See “Smart Response Technology” on page 52.
Compressor protection This feature forces the compressor to wait a few minutes before restarting, to prevent equipment damage. M33882 The message Cool On (or Heat On for a heat pump) will flash during the wait time.
Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day. When the system is set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. MCR33893 Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation. Note: System setting function 12 controls Auto changeover. See “Manual/Auto Changeover” on page 51.
Setting functions and options You can change options for a number of system functions. Available functions depend on the type of system you have. The functions, along with available options are described on pages 50–54. This thermostat is pre-set for a single-stage heating/cooling system. Setting function 1 for a heat pump will adjust the default settings.
Setting functions and options 1 Press Fan and s simultaneously and hold for approximately 3 seconds. The screen will change to display two numbers and the button designations will be Done, Back, blank, Next. 2 Press Next until you see the function number—the larger number on the left— you want to set. 3 Change options for any function by pressing s or t until the correct option (smaller number on right) is displayed. 4 Repeat Steps 2 and 3 until you have set all functions that you wish to change.
System setup (See page 48 for instructions.) Function 1 Select System Type If you are not sure of your heating/ cooling system type or have other questions, go to wifithermostat.com Settings & Options 0 1 2 3 4 5 6 7 8 2 Heat Pump Changeover Valve (for heat pumps only) 0 1 Heat/cool: Gas, oil or electric heating with central air conditioning. Heat pump: Heat pump without backup or auxiliary heat. Heat only: Gas, oil or hot water heat without central air conditioning.
System setup (See page 48 for instructions.) Function Settings & Options Heating Fan Control 0 5 Heating Cycle Rate 6 Heating Cycle Rate Stage 2 5 9 3 3 12 Manual/Auto Changeover See page 47 for more information. 1 1 0 1 Gas or oil heat: Use this setting if you have a gas or oil heating system (system controls fan operation). Electric heat: Use this setting if you have an electric heating system (thermostat controls fan operation).
System setup (See page 48 for instructions.) Function Settings & Options 13 Smart Response Technology See page 45 for more information. 1 0 On Off 14 Temperature Format (°F/°C) 0 1 Fahrenheit Celsius 16 Schedule Options 1 0 Program schedule is on (7-day programmable). Program schedule is off. Thermostat can not be programmed.
System setup (See page 48 for instructions.) Function 36 Settings & Options Device Name 52 = Thermostat 1 Basement This name will 2 Bathroom identify the 3 Bathroom 1 thermostat when 4 Bathroom 2 you view it remotely. 5 Bathroom 3 If you register 6 Bedroom multiple thermostats, 7 Bedroom 1 give each one a 8 Bedroom 2 different name.
System setup (See page 48 for instructions.) Function Settings & Options 38 Wi-Fi On/Off 1 0 Wi-Fi is on and can be connected to a Wi-Fi network. Wi-Fi is off. Thermostat cannot be connected to a Wi-Fi network. If you are not connecting the thermostat to a Wi-Fi network this will remove the text Wi-Fi Setup from the messaging center. 39 Wi-Fi Connection 1 0 Connected to Wi-Fi network. This is set automatically when the thermostat is connected to the Wi-Fi network.
Frequently asked questions QQ: Will my thermostat still work if I lose my Wi-Fi connection? AA: Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. QQ: How do I find the password to my router? AA: Contact the manufacturer of the router or check the router documentation. QQ: Why am I not seeing my Wi-Fi setup page? AA: You are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again.
Frequently asked questions QQ: Where can I find my MAC ID and MAC CRC codes? AA: The MAC ID and MAC CRC numbers are included on a card packed with the thermostat or on the back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC ID and MAC CRC. QQ: My thermostat is unable to register to the Total Connect Comfort website. AA: Verify that the thermostat is correctly enrolled on your home Wi-Fi network.
Frequently asked questions QQ: I registered on the Total Connect Comfort website but was unable to login using my new account. AA: Check your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website. QQ: I have signed up on the Total Connect Comfort website and have not received a confirmation email. AA: Check for the email in your Junk or Deleted folder.
Troubleshooting Lost Signal If the no-Wi-Fi indicator displays in place of the Wi-Fi strength indicator in the upper right hand corner of the home screen: • Check another device to be sure Wi-Fi is working in your home; if not, call your Internet Service Provider. • Move the router. • Restart the thermostat: remove it from the wallplate, wait 10 seconds, and snap it back onto the wallplate. Return to Step 1 of Connecting to your Wi-Fi network.
Troubleshooting Error Codes For certain problems, the thermostat screen will display a code that identifies the trouble. Initially, error codes are displayed alone in the time area of the screen; after a few minutes, the home screen is displayed and the code alternates with the time. M33999 Error Code Action E01 During Wi-Fi Setup, the router lost power. • Ensure your router has power. • If trying to connect to a hidden or manually added network, confirm the router has power and is working.
Troubleshooting Error Code Action • Wait for 30 minutes, connection can take several minutes. • If still no connection, remove thermostat from wallplate for 10 seconds, then reconnect it (see page 26). • Verify your router is correctly setup to automatically give IP addresses. E42 Router is not issuing an IP address to the thermostat. E43 No internet connection. • Make sure the Internet cable is plugged in. Thermostat cannot • Reboot the router. communicate to Total Connect Comfort.
Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating and cooling system is on. • Make sure furnace door is closed securely. • Make sure C wire is connected (see page 13).
Troubleshooting Heat pump issues cool air in heat mode, or warm air in cool mode • Check Function 2: Heat Pump Changeover Valve to make sure it is properly configured for your system (see page 50). Heating or cooling system does not respond • Press System to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press System to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary.
Troubleshooting Heating system is running in cool mode • Check Function 1: System Type to make sure it is set to match your heating and cooling equipment (see page 50). Heating and cooling equipment are running at the same time • Check Function 1: System Type to make sure it is set to match your heating and cooling equipment (see page 50). • Grasp and pull thermostat away from wallplate. Check to make sure bare wires are not touching each other. • Check thermostat wiring is correct.
Glossary C wire The “C” or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump heating/cooling system Heat pumps are used to heat and cool a home. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a heat pump.
Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC Warning (Part 15.
Regulatory information Thermostats To comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 wifithermostat.com ® U.S. Registered Trademark. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. © 2015 Honeywell International Inc. 69-2718EF—05 M.S. Rev. 01-15 Printed in U.S.A.
Guide de l’utilisateur Thermostat programmable Wi-Fi Série RTH6500WF Wi-Fi
Vous trouverez dans la boîte • Thermostat • Plaque murale (fixée au thermostat) • Vis et ancres • Guide de démarrage rapide • Carte d’identification de thermostat • Étiquettes de fils • Guide de l’utilisateur • Carte de référence rapide 69-2718EF—03 ii
Bienvenue Nous vous félicitons de l’achat d’un thermostat programmable Wi-Fi Honeywell. Après vous être enregistré auprès du service Total Connect Comfort de Honeywell, vous pouvez surveiller et contrôler à distance le système de chauffage et de refroidissement de votre domicile ou de votre entreprise — vous pouvez rester connecté à votre service confort où que vous soyez.
Ce thermostat fonctionne sur les systèmes de 24 V commun tels que les systèmes à air pulsé, eau chaude, thermopompe, mazout, gaz et électriques. Il ne fonctionne pas avec les systèmes à mV, tels que les cheminées à gaz, ou avec les systèmes de 120/240 V tels que les chauffages de plinthe. AVIS RELATIF AU MERCURE : Ne jetez pas l’ancien thermostat dans la poubelle s’il contient du mercure dans un tube scellé. Contactez la Thermostat Recycling Corporation à l’adresse www.thermostat-recycle.
Table des matières À propos du nouveau thermostat Aide-mémoire sur les commandes et l’écran d’accueil....................................... 5 Programmes d’économie d’énergie préconfigurés............................... 6 Installation Installation de votre thermostat.................... 8 Connexion à votre réseau Wi-Fi................ 26 Enregistrement de votre thermostat en ligne ................................... 31 Fonctionnement Setting the time and day............................
Caractéristiques de votre thermostat Wi-Fi Avec votre nouveau thermostat, vous pouvez : • Vous connecter à Internet pour surveiller et contrôler votre système de chauffage/refroidissement • Consulter et modifier vos réglages du système de chauffage/refroidissement • Consulter et régler la température et les programmes • Recevoir des alertes par courrier électronique et obtenir des mises à jour automatiques Votre nouveau thermostat procure : • La technologie Smart Response • Une protection du compresse
Aide-mémoire sur les commandes et l’écran d’accueil Une fois votre thermostat Wi-Fi installé, il affichera l’écran d’accueil. Des parties de cet écran seront modifiées en fonction de la manière dont vous le consultez.
Programmes d’économie d’énergie préconfigurés Ce thermostat contient des programmes d’économie d’énergie préconfigurés pour quatre périodes. L’utilisation des réglages par défaut peut vous permettre de réduire vos dépenses de chauffage/refroidissement si vous suivez les instructions indiquées. Les économies peuvent varier en fonction de la région géographique et de l’usage. Pour modifier les réglages, voir pages 39–41.
Configuration de votre thermostat La configuration de votre thermostat programmable Wi-Fi est aisée. Il est préprogrammé et prêt à fonctionner dès qu’il est installé et enregistré. 1 Installez votre thermostat. 2 Connectez réseau sans fil de votre domicile. 3 Enregistrez-vous en ligne pour bénéficier de l’accès à distance. Avant de commencer, vous désirerez peut-être visionner une courte vidéo d’installation. Utilisez le QR Code® figurant sur la couverture de ce guide ou consultez le site wifithermostat.
Installation de votre thermostat Vous aurez besoin des outils suivants pour l’installation de ce thermostat : • • • • • un tournevis Phillips n° 2 un petit tournevis de poche un crayon un niveau (optionnel) une perceuse et des mèches (3/16 po pour une cloison sèche, 7/32 po pour du plâtre) (optionnel) • un marteau (optionnel) • un ruban électrique (optionnel) ou 1 Coupez l’alimentation sur votre système de chauffage/refroidissement.
Installation de votre thermostat 2 Retirez la plaque de l’ancien thermostat et laissez les fils connectés. 2a Prenez une photo des connexions de câblage pour vous y référer plus tard. 2b Si aucun fil n’est connecté à la borne C ou si aucune borne C n’est présente sur l’ancien thermostat, visionnez les vidéos expliquant les autres câblages à wifithermostat.com/videos Important! Le fil C est requis et représente la source d’alimentation principale du thermostat.
Installation de votre thermostat 3 Étiquetez les fils. N’appliquez pas les étiquettes en fonction des couleurs des fils. Utilisez les étiquettes autocollantes fournies pour étiqueter chaque fil lorsque vous le déconnectez. Étiquetez les fils conformément aux désignations de bornes de l’ancien thermostat et non pas en fonction des couleurs des fils.
Installation de votre thermostat 5 Séparez le thermostat Wi-Fi de sa plaque murale. Sur votre nouveau thermostat, saisissez les alvéoles du haut et du bas de la plaque murale d’une main et tenez le thermostat (avant) dans l’autre main. Séparez les deux pièces.
Installation de votre thermostat 6 Montez la plaque murale du thermostat Wi-Fi. Montez votre nouvelle plaque murale à l’aide des vis et ancres fournies avec le thermostat. Plaque murale Au besoin : Percez des trous de 3/16 po (4,8 mm) pour les cloisons sèches. Percez des trous de 7/32 po (5,6 mm) pour le plâtre. Remarque : Vous pourrez peut-être utiliser les ancres murales déjà installées. Tenez la plaque murale sur les ancres déjà installées pour vérifier l’alignement.
Installation de votre thermostat Important! le fonctionnement du thermostat Wi-Fi requiert l’utilisation d’un fil neutre (C). Le fil C, ou neutre, amène l’alimentation 24 V ca au thermostat. De nombreux thermostats mécaniques ou à piles plus anciens n’ont pas besoin d’un fil C. Si vous ne disposez pas d’un fil C, essayez : • de rechercher un fil inutilisé enfoncé dans le mur. Connectez ce fil au fil C et vérifiez s’il est connecté au fil C 24 V ca de votre système de chauffage/refroidissement.
Installation de votre thermostat Câblage (système conventionnel) Retirez le cavalier métallique si les fils 7A Branchez le thermostat Wi-Fi sur votre système conventionnel. R et RC sont tous a En commençant par le fil C, faites correspondre l’étiquette deux présents. autocollante sur le fil à l’étiquette de la borne. Vous devez disposer d’un fil neutre (C). Voir page 13. b Desserrez la vis, insérez le fil dans le bord intérieur de la borne et serrez la vis.
Installation de votre thermostat Câblage (système à thermopompe uniquement) Les étiquettes ne correspondent pas? Reportezvous au code de câblage alternatif des pages 18–19. 7B Branchez le thermostat Wi-Fi à votre thermopompe. a En commençant par le fil C, faites correspondre l’étiquette autocollante sur le fil à l’étiquette de la borne. Vous devez disposer d’un fil neutre (C). Voir page 13. b Desserrez la vis, insérez le fil dans le bord intérieur de la borne et serrez la vis.
Installation de votre thermostat Câblage alternatif (système conventionnel) Utilisez ceci si vos étiquettes de fils ne correspondent pas aux références de bornes. 2 Remarque : vous devez disposer d’un fil C (neutre) ou équivalent. Voir page 13. Y2 W2 G W ou ou F W1 H C Y ou ou X B C1 Y1 M R RC ou ou RH 4 V R 1 K Y2 W2 G W C Y R RC CONVENTIONNEL 3 MFCR33885 Reportez-vous aux points 1 à 3 de la page 17.
Installation de votre thermostat Câblage alternatif (système conventionnel) 1 N’utilisez pas la borne K. Pour une utilisation ultérieure. 2 Si votre ancien thermostat est pourvu de deux fils R et RH, retirez le cavalier métallique. Connectez le fil R à la borne RC et le fil RH à la borne R. 3 Retirez le cavalier métallique reliant R et RC uniquement si vous devez connecter à la fois R et RC.
Installation de votre thermostat Câblage alternatif (système à thermopompe uniquement) Utilisez ceci si vos étiquettes de fils ne correspondent pas aux références de bornes. 3 Remarque : vous devez disposer d’un fil C (neutre) ou équivalent. Voir page 13. 2 L E AUX G 4 4 5 6 O C Y R RC ou ou ou ou ou ou ou ou ou F X X2 W W1 W2 F H B X B Y1 M V VR R 1 7 K L AUX/E G O/B C Y R RC THERMOPOMPE MFCR33886 69-2718EF—03 18 Reportez-vous aux points 1 à 7 de la page 19.
Installation de votre thermostat Code de câblage alternatif (système à thermopompe uniquement) 1 N’utilisez pas la borne K. Pour une utilisation ultérieure. 2 Si l’ancien thermostat est doté de fils distincts aux bornes AUX et E, reliez les deux fils à la borne E/AUX. Si l’ancien thermostat est doté d’un fil à la borne AUX et d’un cavalier à la borne E, reliez le fil à la borne E/AUX. Aucun cavalier n’est requis.
Installation de votre thermostat 8 Insérez la carte de référence rapide. Pliez la carte de référence rapide le long des repères et glissez-la dans la fente à l’arrière du thermostat.
Installation de votre thermostat 9 Fixez le thermostat à la plaque murale. Alignez le thermostat sur la plaque murale puis emboîtez-le.
Installation de votre thermostat 10 Mettez le système de chauffage/ refroidissement en marche. Important! 10a Vérifiez que le fil C est branché sur le thermostat et le système de chauffage/refroidissement. 10b Assurez-vous que la porte du système de chauffage/ refroidissement est bien fermée. 10c Rétablissez l’alimentation du système de chauffage/ refroidissement au niveau du disjoncteur ou de l’interrupteur d’alimentation.
Installation de votre thermostat 11 Réglez l’horloge à la date et à l’heure courantes. 11a Appuyez sur s ou t pour régler l’horloge. 11b Appuyez sur Set Day (Régler le jour). HOLD MCR33908 11c Appuyez sur s ou t pour sélectionner le jour de la semaine. 11d Appuyez sur Done (Terminé) pour enregistrer les réglages. (Appuyez sans relâcher sur un bouton st pour modifier rapidement le réglage.
Installation de votre thermostat 12 Déterminez le type de votre système de chauffage/refroidissement. Important! Le type de système de chauffage/refroidissement doit être réglé de sorte que le thermostat fonctionne correctement et n’endommage pas le système. 12a Si votre système est de type conventionnel à étage unique (étage unique alimenté au gaz naturel avec climatisation), passez à « Connexion à votre réseau Wi-Fi » à la page 26.
Installation de votre thermostat Félicitations! Votre thermostat est maintenant prêt à fonctionner 13 Testez votre thermostat 13a Appuyez sur le bouton System pour passer au chauffage ou au refroidissement et mettre l’appareil en marche. 13b Pour accéder à distance à votre thermostat, passez à « Connexion à votre réseau Wi-Fi » à la page 26. 25 MCR33880 Le système de chauffage/ refroidissement ne s’allume pas? Consultez le page 62 ou la Foire aux questions à wifithermostat.
Connexion à votre réseau Wi-Fi Pour exécuter cette étape, vous devez avoir un appareil sans fil connecté à votre réseau sans fil. Tous ces types d’appareils sont valables : • Tablette (recommandé) • Ordinateur portatif (recommandé) • Téléphone intelligent Si vous êtes bloqué... à tout moment dans cette procédure, redémarrez le thermostat en le retirant de la plaque murale, attendez 10 secondes, et emboîtez-le à nouveau sur la plaque murale.
Connexion à votre réseau Wi-Fi 1 Connectez votre thermostat. 1a Assurez-vous que le thermostat affiche Wi-Fi Setup (Configuration Wi-Fi). 1b Sur votre appareil sans fil (tablette, ordinateur portatif, téléphone intelligent), consultez la liste des réseaux sans fil disponibles. HOLD 1c Connectez-vous au réseau appelé NewThermostat_123456 (le chiffre variera). Remarque : s’il vous est demandé de spécifier un réseau domestique, publique ou de bureau, sélectionnez Réseau domestique.
2 Joignez votre réseau domestique. 2a Ouvrez votre navigateur Web pour accéder à la page de configuration Wi-Fi du thermostat. Le navigateur devrait automatiquement vous diriger vers la page correcte; s’il ne le fait pas, entrez l’adresse http://192.168.1.1 2b Trouvez le nom de votre réseau domestique sur cette page et sélectionnez-le. Remarque : Certains routeurs ont des caractéristiques améliorées tels que les réseaux invités; utilisez votre réseau domestique.
Connexion à votre réseau Wi-Fi Remarque : Si votre réseau Wi-Fi n’apparaît pas dans la liste de la page de configuration Wi-Fi du thermostat : • Essayez de scanner le réseau à nouveau en appuyant sur le bouton Rescan (nouveau balayage). Ceci est utile dans les endroits avec plusieurs réseaux. • Si vous êtes connecté à un réseau invisible, entrez alors le SSID du réseau dans la boîte de dialogue, sélectionnez le type d’encryptage à partir du menu déroulant, et cliquez sur le bouton Add (ajouter).
Connexion à votre réseau Wi-Fi 3 Vérifiez si votre thermostat est connecté. Lorsque la connexion est en cours, Wait (Patientez) clignote sur le thermostat pour une durée pouvant aller jusqu’à 3 minutes. Une fois la connexion établie, l’affichage indique Wi-Fi Setup Connection Success (Connexion Wi-Fi établie). La puissance du signal Wi-Fi s’affiche dans le coin supérieur droit.
Enregistrement de votre thermostat en ligne Pour visualiser et régler votre thermostat Wi-Fi à distance, vous devez posséder un compte Total Connect Comfort. Voici comment procéder. 1 Ouvrez le site web Total Connect Comfort. Allez sur le site mytotalconnectcomfort.com M31570 Visionnez la vidéo d’enregistrement du thermostat Wi-Fi à wifithermostat.
2 Ouvrez une session ou créez un compte. Si vous possédez un compte, cliquez sur Login (Ouvrir une session) – ou – cliquez sur Create An Account (créer un compte). 2a Suivez les instructions à l’écran. 2b Consultez votre messagerie et recherchez le message d’activation provenant de My Total Connect Comfort. Ceci peut prendre plusieurs minutes. Remarque : Si vous ne recevez aucune réponse, consultez votre boîte de pourriels ou utilisez une autre adresse électronique.
Enregistrement de votre thermostat en ligne 3 Enregistrez votre thermostat Wi-Fi. Lorsque vous avez accès à votre compte Total Connect Comfort, enregistrez votre thermostat. 3a Suivez les instructions à l’écran. Après avoir ajouté l’emplacement de votre thermostat, vous devez entrer les identifiants uniques de votre thermostat : • MAC ID • MAC CRC Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.
Enregistrement de votre thermostat en ligne 3b Lorsque le thermostat est convenablement enregistré, l’écran d’enregistrement Total Connect Comfort affiche le message SUCCESS (réussi). Sur l’affichage du thermostat, Setup Complete (Configuration terminée) s’affiche pour environ 90 secondes.
Enregistrement de votre thermostat en ligne 3c Veuillez aussi noter que le thermostat affiche maintenant la puissance du signal. Félicitations! Vous avez terminé. Vous pouvez maintenant contrôlervotre thermostat de n’importequel endroit au moyen de votre ordinateur portatif, de votre tablette ou de votre téléphone intelligent. Des applications gratuites sont disponibles pour les appareils iPhone , iPad et iPod touch d’Apple sur iTunes ou sur Google Play pour tous les appareils Android.
Réglage de l’heure et du jour 1 Appuyez sur Set Clock/Day/Schedule (Régler l’horloge/le jour/le programme), puis sur s ou sur t pour régler l’horloge. HOLD 2 Appuyez sur Set Day (Régler le jour) ou sur s ou sur t pour choisir le jour de la semaine. 3 Appuyez sur Done (Terminé) pour sauvegarder. Remarque : Si l’option Set Clock/Day/Schedule (Régler l’horloge/le jour/le programme) n’est pas affichée, appuyez sur Done (Terminé).
Réglage du ventilateur Appuyez Fan pour sélectionner On (en fonction) ou Auto (basculez pour resélectionner). Auto : le ventilateur fonctionne uniquement lorsque le système de chauffage ou de refroidissement est en fonction. Auto est le réglage le plus couramment utilisé. On : le ventilateur est toujours en fonction. MCR33895 Remarque : Les options peuvent varier en fonction de l’équipement de chauffage/ refroidissement.
Sélection du mode de fonctionnement du système Appuyez sur System (système) pour sélectionner une option. Heat (chauffage) : commande uniquement le système de chauffage. Cool (refroidissement) : commande uniquement le système de refroidissement. Off (arrêt) : les systèmes de chauffage et de refroidissement sont arrêtés. Auto : sélectionne le chauffage ou le refroidissement en fonction de la température intérieure.
Réglage des programmes 1 Appuyez sur Set Clock/Day/Schedule (Régler l’horloge/ le jour/le programme), puis sur Set Schedule (Régler le programme). 2 Appuyez sur s ou sur t pour régler l’heure du réveil de lundi, puis appuyez sur Next (Suivant). 3 Appuyez sur s ou sur t pour régler la température pour cette période, puis appuyez sur Next (Suivant). 4 Réglez l’heure et la température pour la période suivante (Leave/Départ). Répétez les étapes 2 et 3 pour chaque période.
Dérogation temporaire de la programmation Appuyez sur s ou t pour ajuster immédiatement la température. La nouvelle température sera uniquement maintenue jusqu’au début de la prochaine période programmée. Pour annuler ce réglage temporaire à tout moment, appuyez sur Cancel (annuler). L’horaire de programmation est à nouveau en vigueur.
Dérogation permanente de la programmation 1 Appuyez sur HOLD (maintien) pour régler la température de façon permanente. Ceci désactive l’horaire de programmation. 2 Appuyez sur s ou sur t pour régler la température. Le réglage de la température sera maintenu 24 heures par jour jusqu’à ce que vous le changiez manuellement ou que vous appuyiez sur Cancel (Annuler) pour revenir au programme.
Annulation de l’enregistrement du thermostat Si vous supprimez le thermostat de votre compte Total Connect Comfort (par exemple, si vous déménagez et laissez le thermostat en place), le thermostat affichera le message Register at Total Connect (Enregistrez-vous sur Total Connect) jusqu’à ce qu’il soit enregistré de nouveau.
Déconnexion Wi-Fi Remplacement du routeur Si vous déconnectez le thermostat de votre réseau Wi-Fi : 1 Entrez dans la configuration du système (voir page 48). 2 Réglez la fonction 39 à 0 (voir page 54). L’écran affichera le message Wi-Fi Setup (Configuration Wi-Fi). M33855 Reconnectez-vous à un réseau Wi-Fi en suivant les étapes de la page 26.
Mises à jour du logiciel Honeywell introduit régulièrement des mises à jour du logiciel pour ce thermostat. Les mises à jour s’effectuent automatiquement par votre connexion Wi-Fi. Tous vos réglages sont sauvegardés; vous n’avez donc pas besoin de procéder à des changements après la mise à jour. Pendant la mise à jour, le message Updating (Mise à jour en cours) clignote sur votre thermostat qui affiche également le pourcentage de mise à jour effectué.
Technologie Smart Response Celle-ci permet au thermostat « d’apprendre » combien de temps il faut à votre système de chauffage/refroidissement pour atteindre le réglage de température programmé, afin que la température voulue soit obtenue à l’heure programmée. Par exemple : réglez l’heure de réveil à 6 heures et la température à 70°. Le chauffage est mis en fonction avant 6 heures de manière à ce que la température soit de 70° à 6 heures.
Protection du compresseur Cette fonction force le compresseur à attendre quelques minutes avant un redémarrage, pour éviter d’endommager l’équipement. M33882 Le message Cool On (Refroidissement en marche) (ou Heat On [Chauffage en marche] pour une pompe à chaleur) clignote en attendant.
Commutation automatique Celle-ci est utilisée dans les climats où le conditionnement d’air et le chauffage sont utilisés le même jour. Lorsque le système est réglé sur Auto, le thermostat sélectionne automatiquement le chauffage ou le refroidissement en fonction de la température intérieure. MCR33893 L’écart entre les réglages de chauffage et de refroidissement doit être d’au moins 3 degrés. Le thermostat ajuste automatiquement les réglages afin de maintenir ces 3 degrés d’écart.
Fonctions et options de configuration Vous pouvez modifier des options pour plusieurs fonctions du système. Les fonctions disponibles dépendent de votre type de système. Les fonctions ainsi que les options disponibles sont décrites aux pages 50–54. Ce thermostat est préréglé pour un système de chauffage/refroidissement à étage unique. La fonction de configuration 1 pour une thermopompe ajustera les réglages par défaut.
Fonctions et options de configuration 1 Appuyez simultanément sur Fan (Ventilateur) et sur s pendant 3 secondes environ. L’écran change pour afficher deux nombres et les appellations des boutons sont les suivantes : Done (Terminé), Back (Retour), sans appellation, Next (Suivant). 2 Appuyez sur Next (Suivant) jusqu’à ce que vous aperceviez le numéro de la fonction – le nombre plus élevé à gauche – du réglage voulu.
Configuration du système (Voir la page 48 pour les instructions.) Fonction 1 Sélection du type de système Si vous n’êtes pas certain de votre type de système de chauffage/ refroidissement ou que vous avez d’autres questions, consultez le site wifithermostat.com Réglages et Options 0 Chauffage/refroidissement : chauffage au gaz, au mazout ou électrique avec climatisation centrale. 1 Thermopompe : thermopompe sans chauffage de secours ou auxiliaire.
Configuration du système (Voir la page 48 pour les instructions.) Fonction Réglages et Options 0 Vanne de commutation de refroidissement : utilisez ce réglage si vous avez connecté un fil étiqueté « O » à la borne O/B. Vanne de commutation de chauffage : utilisez ce réglage si vous avez connecté un fil étiqueté « B » à la borne O/B. 0 Chauffage au gaz ou au mazout : utilisez ce réglage en cas de système de chauffage au gaz ou au mazout (le système contrôle le fonctionnement du ventilateur).
Configuration du système (Voir la page 48 pour les instructions.) Fonction Réglages et Options 0 1 Commutation manuelle (Chauffage/Refroidissement/Arrêt). Commutation automatique (Chauffage/Refroidissement/Auto/Arrêt). Active automatiquement le chauffage ou le refroidissement en fonction de la température de la pièce. Remarque : le système maintient une différence minimale de 3 °F entre les réglages de chaleur et de refroidissement.
Configuration du système (Voir la page 48 pour les instructions.) Fonction 36 Device Name (Nom de l’appareil) Ce nom identifiera le thermostat lorsque vous le consultez à distance. Si vous enregistrez plusieurs thermostats, attribuez un nom différent à chacun d’entre eux.
Configuration du système (Voir la page 48 pour les instructions.) Fonction Réglages et Options 38 Wi-Fi En marche/Arrêt 1 0 Le Wi-Fi est en marche et le thermostat peut être connecté à un réseau Wi-Fi Le Wi-Fi est en marche. Le thermostat ne peut pas être connecté à un réseau Wi-Fi. Si vous ne connectez pas le thermostat à un réseau Wi-Fi, le texte Wi-Fi Setup (configuration Wi-Fi) sera supprimé de la fenêtre de messages. 39 Connexion Wi-Fi 1 0 Connecté au réseau Wi-Fi.
Questions fréquemment posées QQ : Mon thermostat fonctionnera-t-il toujours si je perds ma connexion Wi-Fi? RR : Oui, le thermostat actionnera votre système de chauffage et/ou de refroidissement avec ou sans Wi-Fi. QQ : Comment puis-je trouver le mot de passe de mon routeur? RR : Contactez le fabricant du routeur. QQ : Pourquoi ne vois-je pas ma page de configuration Wi-Fi? RR : Vous êtes probablement uniquement connecté à votre routeur, et non pas à votre thermostat.
Questions fréquemment posées QQ : Où puis-je trouver mes codes MAC ID et MAC CRC? RR : Les numéros MAC ID et MAC CRC figurent sur la carte qui accompagne le thermostat ou au dos du thermostat (visible lorsque le thermostat est retiré de la plaque murale). Chaque thermostat possède un MAC ID et un MAC CRC uniques. QQ : Il est impossible d’enregistrer mon thermostat sur le site Total Connect Comfort. RR : Vérifiez si le thermostat est correctement inscrit dans le réseau Wi-Fi domestique.
Questions fréquemment posées QQ : Je suis enregistré sur le site Total Connect Comfort mais je n’ai pas pu ouvrir de session en utilisant mon nouveau compte. RR : Consultez votre messagerie et vérifiez si vous avez reçu le message d’activation. Suivez les instructions d’activation de votre compte, puis ouvrez une session sur le site web. QQ : Je me suis enregistré sur le site Total Connect Comfort et n’ai pas reçu de message de confirmation.
Dépannage Perte du signal Si l’indicateur no-Wi-Fi (pas de Wi-Fi) s’affiche à la place de l’indicateur de puissance du signal Wi-Fi dans le coin supérieur droit de l’écran d’accueil : • Assurez-vous que la Wi-Fi fonctionne chez vous en la vérifiant sur un autre appareil; si elle ne fonctionne pas, adressez-vous à votre fournisseur de services Internet. • Déplacez le routeur. • Redémarrez le thermostat : retirez-le de la plaque murale, patientez pendant 10 secondes et raccrochez-le sur la plaque murale.
Dépannage Codes d’erreur Dans le cas de certains problèmes, l’écran du thermostat affiche un code qui désigne la nature du problème. Tout d’abord, les codes d’erreur sont affichés seuls dans la zone de l’heure de l’écran; après quelques minutes, l’écran d’accueil s’affiche et le code et l’heure s’affichent alternativement. M33999 Code d’erreur Action E01 • Assurez-vous que le routeur est alimenté.
Dépannage Code d’erreur E42 Le routeur ne fournit pas d’adresse IP au thermostat. Action • Patientez pendant 30 minutes, la connexion peut prendre plusieurs minutes. • S’il n’y a toujours pas de connexion, retirez le thermostat de la plaque murale pendant 10 secondes, puis raccrochez-le (voir page 26). • Assurez-vous que votre routeur est correctement configuré pour fournir automatiquement les adresses IP. E43 Pas de connexion Inter- • Assurez-vous que le câble Internet est branché. net.
Dépannage En cas de difficultés avec le thermostat, essayer les suggestions suivantes. La plupart des problèmes peuvent être réglés rapidement et facilement. Rien n’apparaît à l’écran • Vérifiez le disjoncteur et réinitialisez-le si nécessaire. • Assurez-vous que l’interrupteur de marche-arrêt du système de chauffage et de refroidissement est sur marche. • Assurez-vous que la porte de l’appareil de chauffage est bien fermée. • Vérifiez si le fil C est connecté (voir page 13).
Dépannage La thermopompe émet de l’air frais en mode chauffage, ou de l’air chaud en mode refroidissement Le système de chauffage ou de refroidissement ne répond pas • Vérifiez la fonction 2 : Vanne de commutation de thermopompe pour vous assurer qu’elle soit configurée en fonction de votre équipement de chauffage (voir page 51). • Appuyez sur System (système) pour régler le système sur Heat (chauffage). Vérifiez si le réglage de température est supérieur à la température intérieure.
Dépannage Le système de chauffage fonctionne en mode refroidissement L’équipement de chauffage et l’équipement de refroidissement fonctionnent en même temps • Vérifiez la fonction 1 : Type de système pour vous assurer qu’elle soit configurée en fonction de votre équipement de chauffage et de refroidissement (voir page 50). • Vérifiez la fonction 1 : Type de système pour vous assurer qu’elle soit configurée en fonction de votre équipement de chauffage et de refroidissement (voir page 50).
Glossaire Fil C Le fil « C », ou neutre, amène l’alimentation 24 V ca au thermostat à partir du système de chauffage/ refroidissement. Certains anciens thermostats mécaniques ou à pile peuvent ne pas être dotés de ce fil. Il est nécessaire à l’établissement d’une connexion Wi-Fi à votre réseau domestique. Système de chauffage/refroidissement à thermopompe Des thermopompes sont utilisées pour chauffer et refroidir un immeuble.
Informations réglementaires Déclaration de conformité à la FCC (partie 15.19) (États-Unis uniquement) Cet appareil est conforme à la partie 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : 1 Ce dispositif ne doit pas causer d’interférences nuisibles, et 2 Ce dispositif doit accepter toutes les interférences reçues, y compris celles pouvant causer un fonctionnement non souhaité.
Informations réglementaires Thermostats Pour être conformes aux limites d’exposition aux radiofréquences établies par FCC et Industrie Canada pour le grand public/l’exposition non contrôlée, la ou les antennes utilisées pour ces transmetteurs doivent être installées à au moins 20 cm de toutes les personnes et ne peuvent être situées au même endroit qu’une autre antenne ou fonctionner conjointement avec une autre antenne ou un autre transmetteur.
Garantie limitée d’un an Honeywell garantit ce produit, à l’exception des piles, contre tout défaut de pièce ou de main-d’œuvre, durant une période d’un (1) an à partir de la date d’achat par le consommateur si le produit est utilisé et entretenu convenablement. En cas de défectuosité ou de mauvais fonctionnement pendant la période de garantie, Honeywell remplacera ou réparera le produit, à sa discrétion.
Systèmes d’automatisation et de régulation Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 wifithermostat.com ® Marque de commerce déposée américaine. Apple, iPhone, iPad, iPod touch et iTunes sont des marques de commerce de Apple Inc. Toutes les autres marques de commerce sont propriété de leurs propriétaires respectifs. © 2015 Honeywell International Inc. 69-2718EF—05 M.S. Rev.