Operating Manual RTH7600 Touchscreen Programmable Thermostat 69-2207ES-05
This manual covers the RTH7600 model. (Pull thermostat from wallplate and turn over to find model number) This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50°F (10°C). Need Help? For assistance with this product please visit http://yourhome.
RTH7600 Table of contents About your new thermostat Appendices Thermostat features..................................... 2 Programming at a glance............................. 3 Quick reference to controls.......................... 4 Quick reference to status display................. 5 Battery replacement................................... 17 In case of difficulty..................................... 18 Limited warranty......................................... 20 Programming & Operation Clock setting...
Operating Manual About your new thermostat Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and climate control. Features • Large touchscreen display with backlight is easy to read—even in the dark. • Daily program schedules maximize comfort and economy. • One-touch temp control overrides program schedule at any time. • Precise comfort control keeps temperature within 1°F of the level you set.
RTH7600 This thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1. Set clock.................................................................................................See page 6 2. Select fan setting: Preset to Auto........................................To change, see page 7 3. Select system setting: Preset to Heat.................................
Operating Manual Quick reference to controls Arrow keys Press to adjust temperature (see pages 11–13), or to make selections from screen menus. System & Fan Press to select fan operation (see page 7) or system (see page 8). Mon 75 System Cool Recovery System & Fan Set To 6:01 AM 75 Heat On Clock & More Press to set clock (see page 6) or furnace filter reminder. Fan Auto Schedule Clock & Mode M27525 Schedule Press to set program schedule (see pages 10–11).
RTH7600 Quick reference to status display Current day of week Current inside temperature Current time Mon Smart Response Technology in effect (see page 17) ® 75 System Cool Recovery System & Fan System setting (see page 8) Temperature setting Set To 6:01 AM 75 Heat On Fan Auto Schedule Clock & Mode M27526 Other display messages: • Cool On: Cooling system is activated • Heat On: Heating system is activated • Aux Heat On: Auxiliary heating system is activated (heat pump systems only) Fan s
Operating Manual Clock setting Press CLOCK System & Fan Schedule To set the current time display, press CLOCK, then press s or t to adjust the time. Press and hold s or t to advance the time more quickly. Clock & Mode M27527 Press DONE to save & exit (or press GO BACK to exit without changing the time). Adjust time, then press DONE Note: The real-time clock should never require adjustment since it automatically updates for daylight savings time, and stores all date/time information.
RTH7600 Fan setting Press SYSTEM & FAN System & Fan Schedule Press SYSTEM & FAN, then FAN to select fan operation: Clock & Mode M27527 • On: Fan is always on. • Auto: Fan runs only when the heating or cooling system is on.
Operating Manual System setting Press SYSTEM & FAN System & Fan Schedule Follow steps at left to select system: Clock & Mode M27527 Press SYSTEM to select mode, then press DONE System Heat Fan Auto System Fan • Heat: Thermostat controls only the heating system. • Cool: Thermostat controls only the cooling system. • Auto: Thermostat automatically selects heating or cooling depending on the indoor temperature. • Off: All systems are off.
RTH7600 Save money by setting program schedules It’s easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. WAKE 6:00 am Set to the time you awaken and the temperature you want during the morning, until you leave for the day. LEAVE 8:00 am Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Operating Manual Energy saving for maximum cost savings About your newsettings thermostat This thermostat is pre-set with energy saving program settings. We recommend these settings, since they can reduce your heating/cooling expenses. (See next page to adjust times and temperatures of each time period.
RTH7600 To adjust program schedules Press SCHEDULE System & Fan Schedule Clock & Mode M27527 Press EDIT Go Back 1. Press SCHEDULE, then EDIT to see weekdays. 2. Press SELECT DAY. You can select multiple days to program with the same settings. 3. Press NEXT STEP twice, then press s or t to set Wake time for selected day(s). 4. Press NEXT STEP, then s or t to set Heat temperature for this time period. 5. Press NEXT STEP, then s or t to set Cool temperature for this time period. 6.
Operating Manual Program schedule override (temporary) Adjust temperature Press s or t to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. Mon 62 System Heat System & Fan The new temperature will be maintained until the next time period. Temporary Set To 6:08 AM 68 When the timer expires, the program schedule will resume and set the temperature to the level you’ve programmed for the current time period.
RTH7600 Program schedule override (permanent) Adjust temperature Press s or t to adjust temperature, then press HOLD. This will turn off the program schedule. Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press USE SCHEDULE to cancel “Hold” and resume the program schedule.
Operating Manual Auto Changeover Use this feature in climates where both air conditioning and heating are used on the same day. When the system mode is in Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. While in the Auto mode, if a schedule override takes place (temporarily or permanently) the thermostat will automatically adjust the cooling and heating settings to maintain a 3-degree separation between the cool and heat settings.
RTH7600 Auto Changeover If the cool temperature is lowered to where it gets close to the heat setting, an arrow next to heat will show the thermostat is lowering the heat setting down to maintain a 3-degree separation. Tue 69 System Auto Heat º Temporary Set To 1:09 PM 74 Fan Auto Heat Cool System Hold Cancel M27534 The triangle indicates the cool temperature is increasing to maintain 3 degrees between heat and cool settings.
Operating Manual Furnace filter reminder Press RESET after changing filter Change Filter 70 System Set To 6:01 Heat Reset If activated during installation, the furnace filter reminder alerts you when it is time to replace your filter. AM 70 Press RESET after changing the filter, to restart the timer. Heat On To reset the reminder interval before it expires: Fan Auto Schedule 1. Press MORE, then NEXT. Clock & Mode Press MORE to reset reminder interval 2. Press RESET. M27535 3.
RTH7600 About your Special features new thermostat Smart Response Technology: This feature allows the thermostat to “learn” how long the furnace and air conditioner take to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6 am, and the temperature to 70°. The heat will come on before 6 am, so the temperature is 70° by the time you wake at 6.
Operating Manual About your Battery replacement/Customer new thermostat assistance Grasp thermostat and pull to remove from wallplate Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries immediately when the LO BATT warning begins flashing. The warning flashes about 30 days before batteries are depleted.
RTH7600 About In caseyour of difficulty new thermostat If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank No response to key presses (or temperature will not change) • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely.
Operating Manual About In caseyour of difficulty new thermostat Heating or cooling system does not respond 69-2207ES—05 • Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely.
RTH7600 About your 1-year limited new warranty thermostat Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Operating Manual 1-year limited warranty Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT.
RTH7600 23 69-2207ES—05
Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com ® U.S. Registered Trademark. © 2013 Honeywell International Inc. 69-2207ES—05 M.S. Rev 11-2013 Printed in U.S.A.
Manual de uso RTH7600 Termostato programable con pantalla activada por tacto
Este manual incluye el modelo RTH7500. (Retire el termostato de la placa de montaje y gírelo para ver el número de modelo.) Este termostato tiene una batería de litio que puede contener perclorato. Perclorato: puede ser necesario manipularlo con métodos especiales. Visite www.dtsc.ca.gov/hazardouswaste/perchlorate PRECAUCIÓN: PELIGRO DE DAÑO DEL EQUIPO. Para impedir un posible daño al compresor, no haga funcionar el sistema de refrigeración cuando la temperatura exterior sea inferior a 50° F (10° C).
RTH7600 Índice de contenidos Acerca de su nuevo termostato Apéndices Funciones del termostato............................ 2 Programación a simple vista........................ 3 Referencia rápida de los controles.............. 4 Referencia rápida de la pantalla.................. 5 Instalación de las baterías......................... 17 En caso de dificultades.............................. 18 Garantía limitada........................................ 20 Programación y operación Ajuste del reloj..........
Manual de uso Acerca de su nuevo termostato ¡Felicitaciones! Usted acaba de comprar el termostato más avanzado y más fácil de usar en todo el mundo. Ha sido diseñado para proporcionarle muchos años de servicio confiable y control del clima. Funciones • La pantalla grande sensible al tacto con iluminación posterior es fácil de leer, incluso en la oscuridad. • Horario diarios del programa para una máxima comodidad y economía. • El control de temp.
RTH7600 Este termostato está listo para usar! El nuevo termostato viene preprogramado y listo para usar. Todo lo que tiene que hacer es ajustar la hora y el día. Luego verifique los siguientes ajustes y cámbielos si es necesario: 1. Ajuste la hora....................................................................................... Ver página 6 2. Seleccione el ajuste del ventilador: Predeterminado en Auto............... Ver página 7 3. Seleccione el ajuste del sistema: Predeterminado en Heat........
Manual de uso Referencia rápida de los controles Oprima para ajustar la temperatura (ver páginas 11-13), o para hacer selecciones de menús. System & Fan Oprima para seleccionar el funcionamiento del ventilador (ver página 7) o sistema (ver página 8). Mon 75 System Cool Recovery System & Fan Set To 6:01 AM 75 Heat On Fan Auto Schedule Clock & Mode M27525 Schedule Oprima para anular el horario de programa (ver páginas 10-11).
RTH7600 Referencia rápida de la pantalla Día de la semana actual Temperatura interior actual Hora actual Mon Smart Response Technology activado (ver página 17) ® Ajustes del sistema (ver página 8) 75 System Cool Recovery System & Fan Ajustes del ventilador (ver página 7) Ajuste de temperatura Set To 6:01 AM 75 Heat On Fan Auto Schedule Clock & Mode M27526 Otros mensajes de pantalla: • Cool On : El sistema de refrigeración está activado • Heat On : El sistema de calefacción está activado
Manual de uso Ajuste del reloj Oprima CLOCK System & Fan Schedule Para ajustar la hora actual en pantalla, oprima CLOCK, luego oprima s o t para ajustar la hora. Mantenga oprimido s o t para avanzar la hora con más rapidez. Clock & Mode M27527 Oprima DONE para guardar y salir (u oprima GO BACK para salir sin cambiar la hora).
RTH7600 Ajustes del ventilador Oprima SYSTEM & FAN System & Fan Schedule Oprima SYSTEM & FAN, entonces FAN para seleccionar el funcionamiento del ventilador: Clock & Mode M27527 Oprima FAN al modo selecto, luego oprima DONE System Heat System • On: El ventilador está siempre encendido. • Auto: El ventilador funciona sólo cuando el sistema de calefacción o de refrigeración está encendido.
Manual de uso Ajustes del sistema Oprima SYSTEM & FAN System & Fan Schedule Clock & Mode M27527 Oprima SYSTEM al modo selecto, luego oprima DONE System Heat Fan Auto System Fan Done M27529 Siga los pasos en la izquierda para seleccionar: • Heat: El termostato controla sólo el sistema de calefacción. • Cool: El termostato controla sólo el sistema de refrigeración. • Auto: El termostato selecciona automáticamente la calefacción o refrigeración de acuerdo a la temperatura interior.
RTH7600 Ahorre dinero con el ajuste de los horarios de programas Es fácil programar su sistema que permite un ahorro máximo de energía. Usted puede programar cuatro períodos de tiempo por día, con diferentes configuraciones para los días de semana y los fines de semana. “WAKE” Programe la hora en que se despierta y la temperatura que quiere 6:00 am durante la mañana, hasta que usted se va de su casa.
Manual de uso Configuraciones de ahorro de energía para mayores ahorros de gastos À propos du thermostat Este termostato viene predeterminado con configuraciones de programa para ahorro de energía. Recomendamos estos ajustes, dado que pueden reducir sus gastos de calefacción/refrigeración. (Ver la página siguiente para ajustar las horas y temperaturas para cada período).
RTH7600 À propos Para ajustar dulos thermostat horarios de programas Oprima SCHEDULE System & Fan Schedule Clock & Mode M27527 Oprima EDIT Go Back View Edit M27530 MON TUE WED THU Period Wake 6:00 Set To AM 62 Heat FRI Go Back Next Step Done M27531 1. Oprima SCHEDULE, luego oprima EDIT. 2. Oprima SELECT DAY. Usted puede programar días múltiples con los mismos ajustes. 3. Oprima NEXT STEP dos veces, luego oprima s o t para fijar la hora Wake. 4.
Manual de uso Anulación (temporaria) de horario de programas Ajuste la temperatura Oprima s o t para ajustar inmediatamente la temperatura. Esto anulará temporariamente el ajuste de temperatura para el período actual. Mon 62 System Heat System & Fan La nueva temperatura se mantendrá hasta la hora que haya fijado. Cuando se cumpla el plazo, el horario de programa reanudará y ajustará la temperatura al nivel que haya programado para el período actual.
RTH7600 À propos du Anulación (permanente) thermostat de horario de programas Ajuste la temperatura Oprima s o t para ajustar temperatura, luego oprima HOLD. Esto apagará el horario de programas. Mon 62 System Heat Cualquier temperatura que fije se mantendrá 24 horas al día, hasta que la cambie manualmente, u oprima USE SCHEDULE para cancelar “Hold” y reanude el horario de programas.
Manual de uso À propos duautomática Conversión thermostat Utilice esta característica en climas donde se utilicen tanto el aire acondicionado como la calefacción durante el mismo día. Cuando el sistema está configurado en Auto (automático), el termostato elige automáticamente cuándo calentar o enfriar, dependiendo de la temperatura interior.
RTH7600 À propos duautomática Conversión thermostat Si la temperatura fría desciende a donde queda cercana a la configuración de calefacción, una flecha al lado del calor mostrará que el termostato está bajando la configuración de calor para mantener una separación de 3 grados. Tue 69 System Auto Heat º Temporary Set To 1:09 PM 74 Fan Auto Heat Cool El triángulo indica que la temperatura fría está aumentando para mantener 3 grados entre las configuraciones para calor y frío.
Manual de uso Recordatorio de cambio de filtro de la estufa Oprima RESET después de cambiar el filtro Change Filter 70 System Set To 6:01 Heat Reset Si está activado durante la instalación, el recordatorio del filtro de la estufa le alerta cuando es hora de substituir su filtro. AM 70 Oprima RESET después de cambiar el filtro, para recomenzar el contador de tiempo. Heat On Para cambiar el intervalo del recordatorio: Fan Auto Schedule 1. Oprima MORE, y después NEXT. Clock & Mode 2.
RTH7600 À propos du Funciones especiales thermostat Smart Response Technology: Permite que el termostato “aprenda” cuánto tiempo les lleva a la estufa y al acondicionador de aire alcanzar la temperatura programada, de modo que se alcance la temperatura a la hora fijada. Por ejemplo, fije la hora de levantarse a las 6 AM y la temperatura a 70°. La calefacción se encenderá antes de las 6 AM, para que la temperatura alcance los 70º cuando usted se despierte a las 6.
Manual de uso Reemplazo de baterías/Asistencia al cliente Sujete el termostato y hale para separarlo de la placa de montaje Las baterías son opcionales (para brindar alimentación de respaldo) si el cableado de su termostato se instaló para funcionar con CA. Instale baterías nuevas inmediatamente cuando comience a titilar el aviso LO BATT. El aviso titila alrededor de 30 días antes de que las baterías estén agotadas.
RTH7600 À propos En caso de dudificultades thermostat Si usted tiene dificultades con su termostato, pruebe las sugerencias que figuran a continuación. La mayoría de los problemas se pueden solucionar rápida y fácilmente. Pantalla en blanco Los ajustes de temperatura no cambian • Verifique el disyuntor y reinicie si es necesario. • Asegúrese de que esté encendido el interruptor del sistema de calefacción y refrigeración. • Asegúrese de que esté bien cerrada la puerta de la estufa.
Manual de uso À propos En caso de dudificultades thermostat No responde el sistema de calefacción o de refrigeración 69-2207ES—05 • Oprima SYSTEM para fijar en sistema en Heat. Asegúrese de que la temperatura de ajuste sea mayor que la temperatura interior. • Oprima SYSTEM para fijar en sistema en Cool. Asegúrese de que la temperatura de ajuste sea menor que la temperatura interior. • Verifique el disyuntor y reinicie si es necesario.
RTH7600 À proposlimitada Garantía du thermostat de 1 año Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor. Si en cualquier momento durante el período de garantía se verifica que el producto tiene un defecto o que funciona mal, Honeywell lo reparará o reemplazará (a elección de Honeywell).
Manual de uso À proposlimitada Garantía du thermostat de 1 año INDIRECTAMENTE, DEL INCUMPLIMIENTO DE LAS GARANTÍAS, EXPRESAS O IMPLICÍTAS, O DE OTRAS FALLAS DE ESTE PRODUCTO. Algunos estados no permiten la exclusión o limitación del daño incidental o indirecto, entonces, esta limitación puede no resultar aplicable a su caso. LA PRESENTE GARANTÍA ES LA ÚNICA GARANTÍA EXPRESA QUE HONEYWELL PROPORCIONA RESPECTO DE ESTE PRODUCTO.
RTH7600 23 69-2207ES—05
Soluciones para automatización y control Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com ® Marca registrada de los EE. UU. © 2013, Honeywell International Inc. 69-2207ES—05 M.S. Rev 11-2013 Impreso en EE.