RTH7600 Touchscreen Programmable Thermostat Owner's Manual

17
If activated during installation, the
furnace filter reminder alerts you
when it is time to replace your
filter.
Press RESET after changing the
filter, to restart the timer.
To reset the reminder interval
before it expires:
1. Press MORE, then NEXT.
2. Press RESET.
3. Press DONE to save and exit.
Filter reminder
Reset
Schedule
Clock & Mode
M27535
System
Fan Auto
Set To
Heat On
Change Filter
AM
70
70
6
:
01
Heat
Reset
Next
Done
M27536
60
Days
Special features
Smart Response
®
Technology: This feature allows the thermostat to
“learn” how long the furnace and air conditioner take to reach programmed
temperature settings, so the temperature is reached at the time you set. For
example: Set the Wake time to 6 am, and the temperature to 70°. The heat will
come on before 6 am, so the temperature is 70° by the time you wake at 6.
The message “Recovery” is displayed when the system is activated before a
scheduled time period.
Compressor Protection: This feature forces the compressor to wait a few
minutes before restarting, to prevent equipment damage. During the wait time,
the message “Wait” is displayed on screen.
Auto Changeover: This feature is used in climates where both air conditioning
and heating are used on the same day. When the system is set to Auto,
the thermostat automatically selects heating or cooling depending on the
indoor temperature. Heat and cool settings must be at least 3 degrees apart.
The thermostat will automatically adjust settings to maintain this 3-degree
separation.