Operating Manual RTH8500 Touchscreen Programmable Thermostat 69-2220EF-03
BE CAREFUL! Never use sharp instruments, such as a pencil or pen, to press touchscreen keys. To prevent damage to the thermostat, always press keys with your fingertip. Note: Remove wallplate from the thermostat and see the label on the back of the thermostat for model number. M28372 This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply, See www.dtsc.ca.
RTH8500 Table of contents About your new thermostat Appendices Thermostat features...........................................2 Programming at a glance...................................3 Quick reference to controls................................4 Quick reference to status display.......................5 Battery replacement/ Customer assistance........................................18 In case of difficulty...........................................19 Limited warranty....................................
Operating Manual About your new thermostat Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and touchscreen climate control. Features • 7-day program schedules maximize comfort and economy. • Armchair programming: Just pull thermostat from the wall to set schedules. • One-touch temp control overrides program schedule at any time.
RTH8500 About This thermostat your new thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1. Set clock......................................................................................................................... See page 6 2. Select fan setting: Preset to Auto........................................................ To change, see page 7 3.
Operating Manual Quick reference to controls Press day(s) to set program schedule (see page 11) Press to select fan operation (see page 7) Press to select system type (see page 8) Press to set program schedule (see page 11) MON FAN AUTO TUE WED THU FRI 70 Inside Set To SUN 70 6:01 SCHED Press to adjust temperature settings (see pages 11-14) Press for more options (select models only) Following Schedule SYSTEM HEAT SAT OK TO PICK MULTIPLE DAYS AM HOLD CLOCK SCREEN MORE M28373 Press to
RTH8500 Quick reference to status display Current inside temperature Current day of week Temperature setting WED FAN Fan setting AUTO 70 Inside Set To SYSTEM HEAT System setting Program schedule on (does not display when off) Recovery 6:01 SCHED Current time 70 Following Schedule AM HOLD CLOCK SCREEN MORE M28374 Smart Response Technology in effect (see page 15) ® Other display messages: • Cool On: Cooling system is activated • Heat On: Heating system is activated • Aux Heat On:
Operating Manual WED Clock Inside setting Set To FAN AUTO 70 70 To set the current time display, press CLOCK, then press s or t to adjust the time. Press and hold s or t to advance the time more quickly. Press CLOCK 6:01 SCHED FAN AUTO AM HOLD WED 70 Inside CLOCK SCREEN Set To Adjust time, then press DONE 6:02 DONE Press DONE to save & exit (or press CANCEL to exit without changing the time).
RTH8500 Fan setting Press FAN to select fan operation, then press DONE. WED FAN AUTO 70 Inside Set To • Auto: Fan runs only when the heating or cooling system is on. Following Schedule SYSTEM HEAT • On: Fan is always on.
Operating Manual System setting Press the SYSTEM button to select, then press DONE. WED FAN AUTO 70 Inside Set To • Cool: Thermostat controls only the cooling system. Following Schedule SYSTEM HEAT • Heat: Thermostat controls only the heating system. 70 6:01 SCHED AM HOLD CLOCK SCREEN MORE M28378 Note: The Auto and Em Heat system settings may not appear, depending on how your thermostat was installed.
RTH8500 Save money by setting program schedules It’s easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. WAKE 6:00 am Set to the time you awaken and the temperature you want during the morning, until you leave for the day. LEAVE 8:00 am Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Operating Manual Energy saving settings for maximum cost savings This thermostat is pre-set to use energy saving program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period.
70 70 To adjust program schedules 70 70 6:00 FAN Inside Set To AUTO WED FAN Inside Set To AUTO AM Press SCHED SCHED HOLD CLOCK 6:00 Following Schedule SCREEN MORE M28379 AM Press EDIT DONE EDIT WAKE LEAVE RETURN SLEEP CANCEL M28380 Select day(s) MON TUE Set heat/cool levels WED THU FRI SAT SUN OK TO PICK MULTIPLE DAYS 70 HEAT CANCEL PERIOD 6:00 DONE RTH8500 Following Schedule WAKE 78 AM LEAVE Set time for program period to start RETURN SLEEP 1.
Operating Manual Program schedule override (temporary) Adjust temperature WED FAN AUTO 70 Inside Set To The new temperature will be maintained only until the time you set. When the timer expires, the program schedule will resume and set the temperature to the level you’ve programmed for the current time period. 73 Heat On SYSTEM HEAT Hold Temperature Until 8:00 SCHED HOLD AM CLOCK SCREEN Press s or t to immediately adjust the temperature.
RTH8500 Program schedule override (permanent) Press HOLD Press HOLD to permanently adjust the temperature. This will turn off the program schedule. Adjust temperature WED FAN AUTO 70 Inside Set To Whatever temperature you set will be maintained 24 hours a day until you manually change it or press CANCEL (or SCHED) to cancel “Hold” and resume the program schedule.
Operating Manual Vacation hold This feature can suspend the program schedule for extended periods of time. 1. WED Set temperature FAN AUTO 70 Inside Set To 55 Press s or t to set the temperature you want, then press s or t to set the time of day you want the schedule to resume when you return. Press HOLD twice, then press s or t to select the number of days. SYSTEM HEAT Hold Temperature Until 6:00 SCHED PM HOLD WED CLOCK SCREEN MORE CANCEL 2.
WED FAN RTH8500 SCREEN LOCKED 70 Screen cleaning 70 AUTO Inside Set To Following Schedule Press SCREEN 6:00 SCHED Press SCREEN to lock the screen for cleaning. The screen will remain locked for 30 seconds so you can clean the screen without changing any settings. PM HOLD CLOCK SCREEN MORE M28386 Screen lock timer (30 seconds) 30 After 30 seconds, press DONE to resume normal operation, or press SCREEN again if you require more time for cleaning.
Operating Manual About your Furnace filter new reminder thermostat If activated during installation, the furnace filter reminder alerts you when it is time to replace your filter. Press RESET afterWED changing filter. FAN AUTO SYSTEM HEAT CHANGE FILTER Inside 70 Set To 55 Press RESET after changing the filter, to restart the timer. RESET 6:00 SCHED HOLD To change the reminder interval: PM CLOCK SCREEN 1. Press MORE, then EDIT. MORE M28388 Press MORE to change reminder interval. 2.
RTH8500 Special features Smart Response Technology: This feature allows the thermostat to “learn” how long the furnace and air conditioner take to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6 am, and the temperature to 70°. The heat will come on before 6 am, so the temperature is 70° by the time you wake at 6. The message “Recovery” is displayed when the system is activated before a scheduled time period.
Operating Manual About your Battery replacement/Customer new thermostat assistance Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Grasp thermostat and pull to remove fom wallplate Install fresh batteries immediately when the LO BATT warning begins flashing. The warning flashes about 30 days before batteries are depleted.
RTH8500 In case of difficulty If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • • • • Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. If thermostat is battery powered, make sure fresh AAA alkaline batteries are correctly installed (see page 18).
Operating Manual In case of difficulty Heating or cooling system does not respond • Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. If “Wait” is displayed, the compressor protection timer is on.
RTH8500 1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 http://DIYthermostats.honeywell.com Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. ® U.S. Registered Trademark. © 2011 Honeywell International Inc. 69-2220EF—03 M.S.
Mode d’emploi RTH8500 Thermostat programmable à écran tactile
ATTENTION ! N’appuyez jamais sur les touches d’un écran tactile avec un instrument pointu tel qu’un stylo ou un crayon. Pour empêcher tout dommage au thermostat, appuyez toujours sur les touches du bout du doigt. Remarque : Retirez la plaque murale du thermostat et consulter l’étiquette au dos du thermostat pour obtenir le numéro de modèle. M28372 Ce thermostat contient une pile au lithium qui pourrait contenir du perchlorate.
RTH8500 Table des matières À propos de votre nouveau thermostat Annexes Caractéristiques du thermostat............................... 2 Programmation en bref........................................... 3 Aide-mémoire sur les commandes......................... 4 Aide-mémoire sur l’affichage.................................. 5 Remplacement des piles/ Services à la clientèle........................................... 18 En cas de difficultés.............................................. 19 Garantie limitée.
Mode d’emploi À propos de du votre thermostat nouveau thermostat Félicitations! Vous venez d’acheter le thermostat le plus perfectionné et le plus facile à utiliser du monde. Il est conçu pour vous procurer de nombreuses années de service fiable et assurer la régulation de la température ambiante avec facilité par écran tactile. Caractéristiques • Programmes de 7 jours maximisant confort et économie. • Programmation tout confort : il suffit de retirer le thermostat du mur pour établir les programmes.
RTH8500 Programmation en bref Votre nouveau thermostat est pré-programmé et prêt à fonctionner. Il suffit de régler l’heure et le jour. Vérifiez ensuite les réglages ci-dessous et modifiez-les au besoin : 1. Réglage de l’horloge................................................................................................. Voir page 6 2. Sélection des réglages du ventilateur : Pré-réglé sur Auto............................ Voir page 7 3. Sélection des réglages du système : Pré-réglé sur Chauffage.........
Mode d’emploi À propos du thermostat Aide-mémoire des commandes Appuyez sur les jours pour programmer les réglages (voir page 11) Appuyez pour sélectionner le réglage du ventilateur (voir page 7) Appuyez pour sélectionner le réglage du système (voir page 8) MON FAN AUTO TUE WED THU 70 Inside Set To 6:01 SCHED 69-2220EF—03 SUN 70 HOLD CLOCK SCREEN Appuyez pour modifier le réglage du point de consigne (voir pages 11-14) Appuyez pour obtenir d’autres options (certains modèles seulement) AM Ap
RTH8500 À propos du thermostat Aide-mémoire de l’affichage d’état Température intérieure actuelle Jour de la semaine en cours Réglage du point de consigne WED FAN Réglage ventilateur AUTO 70 Inside Set To Following Schedule SYSTEM Réglage système HEAT Programme en cours (ne s’affiche pas lorsqu’il n’est pas en fonctionnement) 70 Recovery 6:01 AM Technologie Smart Response en service (voir page 15) ® Heure actuelle SCHED HOLD CLOCK SCREEN MORE M28374 Autres messages affichés : • Coo
Mode d’emploi WED Réglage de l’horloge Inside Set To FAN AUTO 70 70 Pour régler l’affichage de l’heure actuelle, appuyez sur CLOCK, puis sur s ou t pour modifier l’heure. Appuyez sur les touches s et t et maintenez-les enfoncées pour avancer l’heure plus rapidement.
RTH8500 Réglages du ventilateur Appuyez sur la touche FAN pour sélectionner le mode de fonctionnement du ventilateur, puis appuyez sur DONE : WED FAN AUTO 70 Inside Set To • On : Le ventilateur est constamment en marche. • Auto : Le ventilateur ne fonctionne que lorsque le système de chauffage ou de climatisation fonctionne.
Mode d’emploi Réglages du système Appuyez sur la touche SYSTEM pour sélectionner le mode de fonctionnement, puis appuyez sur DONE : WED FAN AUTO 70 Inside Set To • Heat : Le thermostat ne commande que le système de chauffage. Following Schedule SYSTEM HEAT 70 6:01 SCHED • Cool : Le thermostat ne commande que le système de climatisation. AM HOLD CLOCK SCREEN MORE M28378 Remarque : Les options Auto et Em Heat peuvent ne pas apparaître, selon la façon dont votre thermostat a été installé.
RTH8500 Économisez de l’argent en paramétrant le programme Il est facile de programmer votre système afin de réaliser un maximum d’économies d’énergie. Vous pouvez programmer quatre plages horaires chaque jour, avec des réglages différents la semaine et les fins de semaine. WAKE 6:00 am Programmez l’heure de votre réveil et la température désirée le matin jusqu’à votre départ pour la journée.
Mode d’emploi Réglages d’économie d’énergie pour des économies d’énergie maximales Ce thermostat est préréglé sur un programme d’économie d’énergie. Nous conseillons ces réglages car ils peuvent réduire vos dépenses de chauffage/climatisation de jusqu’à 33%. (Voir la page suivante pour horaires et points de consigne de chaque plage.
70 70 Pour modifier le programme 70 70 6:00 FAN Inside Set To RTH8500 AUTO WED FAN Following Schedule Inside Set To AUTO AM Appuyez sur SCHED SCHED HOLD CLOCK 6:00 Following Schedule SCREEN MORE M28379 AM Appuyez sur EDIT DONE EDIT Sélectionnez jour(s) MON TUE WAKE LEAVE RETURN SLEEP CANCEL M28380 Sélectionnez les points de consigne de chauffage/de climatisation WED THU FRI SAT SUN OK TO PICK MULTIPLE DAYS 70 HEAT CANCEL PERIOD 6:00 DONE WAKE 78 AM LEAVE Fixez l’
Mode d’emploi Dérogation aux programmes (temporaire) Réglez le point de consigne WED FAN AUTO 70 Inside Set To Le nouveau point de consigne sera maintenu jusqu’à l’heure fixée. Une fois le temps affiché à la minuterie écoulé, le programme en cours reprend et revient au point de consigne prévu. 73 Heat On SYSTEM HEAT Hold Temperature Until 8:00 SCHED HOLD Pour annuler le réglage temporaire à un moment quelconque, appuyez sur CANCEL (ou sur SCHED). Le programme reprendra.
RTH8500 Dérogation au programme (permanente) Appuyez sur HOLD Modifiez le point de consigne WED FAN AUTO 70 Inside Set To 73 Quelle que soit le point de consigne fixé, il sera maintenu 24 heures sur 24 jusqu’à ce que vous le modifiez à la main, ou appuyez sur CANCEL (ou SCHED) pour annuler « HOLD » et reprendre le programme. Heat On SYSTEM HEAT 8:00 Appuyez sur HOLD pour modifier le point de consigne de manière permanente et suspendre le programme en cours.
Mode d’emploi Maintien pendant les vacances Cette fonction peut suspendre le programme pour une période prolongée. 1. ProgrammezWED le point de consigne FAN AUTO 70 Inside Set To 55 Appuyez sur s ou t pour régler au point de consigne désir et appuyez ensuite sur s ou t pour programmer l’heure du jour où vous voulez que le programme reprenne à votre retour. Appuyez deux fois sur HOLD, et appuyez ensuite sur s ou t pour sélectionner le nombre de jours.
WED FAN RTH8500 SCREEN LOCKED 70 70 Nettoyage de l’écran AUTO Inside Set To Following Schedule Appuyez sur SCREEN 6:00 SCHED Appuyez sur SCREEN pour verrouiller l’écran afin de le nettoyer. L’écran restera verrouillé pendant 30 secondes pour permettre de le nettoyer sans modifier les réglages.
Mode d’emploi Rappels - Remplacement du filtre WEDaprès avoir changé le filtre. Appuyez sur RESET FAN AUTO SYSTEM HEAT CHANGE FILTER Inside 70 Set To 55 Appuyez sur RESET après avoir changé le filtre, pour remettre en marche la minuterie. RESET 6:00 SCHED HOLD Lorsque le rappel CHANGE FILTER s’allume, il est temps de remplacer le filtre de l’apparel de chauffage. Pour changer l’intervalle de rappel : PM CLOCK SCREEN 1. Appuyez sur MORE, puis sur EDIT.
RTH8500 À propos du Fonctions spéciales thermostat Commutation automatique : La fonction de commutation chaud-froid est utilisée dans les régions où il peut arriver que le système de chauffage et le système de refroidissement soient utilisés le même jour. Lorsqu’il est réglé à Auto, le thermostat sélectionne automatiquement le chauffage ou la climatisation en fonction de la température intérieure. Il doit y avoir un écart de trois degrés entre les points de consigne de chauffage et de refroidissement.
Mode d’emploi Remplacement des piles/Services à la clientèle Saisissez le thermostat et tirez-le pour le sortir de la plaque Les piles sont facultatives (pour fournir une alimentation de secours) si le thermostat a été câblé pour fonctionner sur secteur (alimentation c.a.) lors de l’installation. Installez des piles neuves dès que l’avertissement LO BATT commence à clignoter. L’avertissement clignote environ 30 jours avant que les piles soient complètement à plat.
RTH8500 À propos En cas dedu difficultés thermostat Si vous éprouvez des difficultés avec votre thermostat, veuillez essayer les suggestions ci-dessous. La plupart des problèmes se corrigent rapidement et facilement. Écran vide est vide • • • • Touche sur le coin inférieur droit de l’écran est vierge • Vérifiez le disjoncteur et réenclenchez-le. Vérifiez que le commutateur d’alimentation de l’installation de chauffage ou de la climatisation est sur marche.
Mode d’emploi À propos En cas dedu difficultés thermostat Le système de chauffage ou de climatisation ne réagit pas • Appuyez sur la touche SYSTEM pour mettre le système à HEAT (chauffage). Vérifiez que le réglage du point de consigne est supérieur à la température intérieure. • Appuyez sur la touche SYSTEM pour mettre le système à COOL (climatisation). Vérifiez que le réglage du point de consigne est inférieur à la température intérieure. Vérifiez le disjoncteur et réenclenchez-le, s’il y a lieu.
RTH8500 Garantie limitée de un an Honeywell garantit ce produit, à l’exception des piles, contre tout vice de fabrication ou de matière dans la mesure où il en est fait une utilisation et un entretien convenables, et ce, pour un (1) an à partir de la date d’achat par le consommateur. En cas de défectuosité ou de mauvais fonctionnement pendant la période de garantie, Honeywell remplacera ou réparera le produit (au gré de Honeywell) dans un délai raisonnable.
Solutions de régulation et d’automatisation Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 http://DIYthermostats.honeywell.com Imprimé aux É.-U. sur du papier recyclé contenant au moins 10 % de fibres de papier recyclées après consommation. ® Marque déposée aux É.-U. © 2011 Honeywell International Inc. 69-2220EF—03 M.S.