Operating Manual RTH8500 Touchscreen Programmable Thermostat 69-1901ES-1
BE CAREFUL! Never use sharp instruments, such as a pencil or pen, to press touchscreen keys. To prevent damage to the thermostat, always press keys with your fingertip. This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Need Help? For assistance with this product please visit http://yourhome.honeywell.
RTH8500 Table of contents About your new thermostat Appendices Thermostat features............................... 2 Programming at a glance...................... 3 Quick reference to controls................... 4 Quick reference to status display......... 5 Battery replacement............................. 18 In case of difficulty............................... 19 Limited warranty................................... 21 Programming & Operation Clock setting..........................................
Operating Manual About your new thermostat Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and touchscreen climate control. Features • 7-day program schedules maximize comfort and economy. • Armchair programming: Just pull thermostat from the wall to set schedules. • EnergyStar compliant to greatly reduce your heating/cooling expenses.
RTH8500 About This thermostat your new thermostat is ready to go! Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed: 1. Set clock.........................................................................................................See page 6 2. Select fan setting: Preset to Auto............................................To change, see page 7 3. Select system setting: Preset to Heat.......................
Operating Manual Quick reference to controls Press day(s) to set program schedule (see page 11) Press to select fan operation (see page 7) Press to select system type (see page 8) Press to set program schedule (see page 11) MON FAN AUTO TUE THU 70 Inside Set To SYSTEM HEAT FRI SAT 70 Following Schedule 6:01 SCHED Press to override program schedule (see pages 12-14) WED OK TO PICK MULTIPLE DAYS SUN Press to adjust temperature settings (see pages 11-14) Press for more options (select models
RTH8500 Quick reference to status display Current inside temperature Current day of week Temperature setting WED FAN Fan setting AUTO 70 Inside Set To SYSTEM HEAT System setting Recovery 6:01 SCHED Current time 70 Following Schedule AM HOLD CLOCK SCREEN Program schedule on (does not display when off) MORE Smart Response Technology in effect (see page 15) ® Other display messages: • Cool On: Cooling system is activated • Heat On: Heating system is activated • Aux Heat On: Auxilia
Operating Manual WED Clock setting Inside FAN AUTO 70 Set To Press CLOCK 6:01 SCHED FAN AUTO 70 To set the current time display, press CLOCK, then press s or t to adjust the time. Press and hold s or t to advance the time more quickly. AM WED HOLD 70 Inside CLOCK SCREEN Set To Press DONE to save & exit (or press CANCEL to exit without changing the time).
RTH8500 Fan setting WED FAN AUTO 70 Inside Set To Following Schedule SYSTEM HEAT 70 6:01 SCHED Press FAN to select fan operation, then press DONE. • On: Fan is always on. • Auto: Fan runs only when the heating or cooling system is on.
Operating Manual System setting Press the SYSTEM button to select, then press DONE. WED FAN AUTO 70 Inside Set To Following Schedule SYSTEM HEAT 70 6:01 SCHED AM HOLD CLOCK SCREEN MORE • Heat: Thermostat controls only the heating system. • Cool: Thermostat controls only the cooling system. • Auto: Thermostat automatically selects heating or cooling depending on the indoor temperature. • Off: Heating and cooling systems are off.
RTH8500 Save money by setting program schedules It’s easy to program your system for maximum energy savings. You can program four time periods each day, with different settings for weekdays and weekends. WAKE 6:00 am Set to the time you awaken and the temperature you want during the morning, until you leave for the day. LEAVE 8:00 am Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Operating Manual EnergyStar settings for maximum cost savings ® This thermostat is pre-set to use EnergyStar program settings. We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period.
FAN 70 Inside AUTO Set To 70 RTH8500 To adjust program schedules Following Schedule WED FAN 6:00 70 Inside SCHED HOLD 6:00 Press EDIT DONE EDIT FAN TUE 70 CLOCK Following SCREEN MORE Schedule LEAVE RETURN AM WAKE Select day(s) MON Set To AM AUTO Press SCHED SLEEP CANCEL Set heat/cool levels WED THU FRI SAT SUN OK TO PICK MULTIPLE DAYS 70 AUTO HEAT CANCEL PERIOD 6:00 DONE WAKE 78 AM LEAVE RETURN SLEEP 1. Press SCHED, then EDIT. 2.
Operating Manual Program schedule override (temporary) Adjust temperature Press s or t to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. 73 The new temperature will be maintained only until the time you set. When the timer expires, the program schedule will resume and set the temperature to the level you’ve programmed for the current time period.
RTH8500 Program schedule override (permanent) Press HOLD Adjust temperature WED FAN AUTO 70 Inside Set To Whatever temperature you set will be maintained 24 hours a day until you manually change it or press CANCEL (or SCHED) to cancel “Hold” and resume the program schedule. 73 Heat On SYSTEM HEAT 8:00 Press HOLD to permanently adjust the temperature. This will turn off the program schedule.
Operating Manual Vacation hold This feature can suspend the program schedule for extended periods of time. 1. WED Set temperature FAN AUTO 70 Inside Set To 55 Press s or t to set the temperature you want, then press s or t to set the time of day you want the schedule to resume when you return. Press HOLD twice, then press s or t to select the number of days. SYSTEM HEAT Hold Temperature Until 6:00 SCHED PM HOLD CLOCK SCREEN MORE CANCEL WED 2.
RTH8500 Special features Smart Response Technology: This feature allows the thermostat to “learn” how long the furnace and air conditioner take to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6 am, and the temperature to 70°. The heat will come on before 6 am, so the temperature is 70° by the time you wake at 6. The message “Recovery” is displayed when the system is activated before a scheduled time period.
Operating Manual WED About your Screen cleaning new thermostat FAN AUTO SCREEN LOCKED 70 Inside Set To Press SCREEN 6:00 SCHED 70 Following Schedule PM HOLD CLOCK SCREEN MORE Screen lock timer (30 seconds) 30 OK TO CLEAN SCREEN Press SCREEN to lock the screen for cleaning. The screen will remain locked for 30 seconds so you can clean the screen without changing any settings.
RTH8500 Furnace filter reminder Press RESET after WED changing filter. FAN AUTO SYSTEM HEAT CHANGE FILTER Inside 70 Set To 55 RESET 6:00 SCHED HOLD If activated during installation, the furnace filter reminder alerts you when it is time to replace your filter. Press RESET after changing the filter, to restart the timer. To change the reminder interval: PM 1. Press MORE, then EDIT. CLOCK SCREEN MORE Press MORE to change reminder interval. Filter 2.
Operating Manual About your Battery replacement new thermostat Grasp thermostat and pull to remove fom wallplate Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries immediately when the LO BATT warning begins flashing. The warning flashes about 30 days before batteries are depleted. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month.
RTH8500 In case of difficulty If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • • • • Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. If thermostat is battery powered, make sure fresh AAA alkaline batteries are correctly installed (see page 18).
Operating Manual In case of difficulty Heating or cooling system does not respond • Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. If “Wait” is displayed, the compressor protection timer is on.
RTH8500 1-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
Automation and Control Systems Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 http://yourhome.honeywell.com Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. ® U.S. Registered Trademark. © 2007 Honeywell International Inc. US Patent No. 6595430, D520,386; other patents pending 69-1901ES—1 Rev. M.S.
Manual de Uso RTH8500 Termostato programable con pantalla activada por tacto 69-1901ES-1
¡TENGA CUIDADO! Nunca utilice instrumentos con punta afilada, como un lápiz o bolígrafo para oprimir las teclas de la pantalla activada por tacto. Para evitar dañar el termostato, siempre oprima las teclas con la punta del dedo. Este termostato tiene una batería de litio que puede contener perclorato. Perclorato: puede ser necesario manipularlo con métodos especiales. Visite www.dtsc.ca.gov/hazardouswaste/perchlorate. ¿Necesita ayuda? Para recibir asistencia con este producto visite http://yourhome.
RTH8500 Índice de contenidos Acerca de su nuevo termostato Apéndices Funciones del termostato........................... 2 Programación a simple vista...................... 3 Referencia rápida de los controles............ 4 Referencia rápida de la pantalla................ 5 Instalación de las baterías....................... 18 En caso de dificultades............................ 19 Garantía limitada....................................... 21 Programación y operación Ajuste del reloj.....................
Manual de Uso Acerca de su nuevo termostato ¡Felicitaciones! Usted acaba de comprar el termostato más avanzado y más fácil de usar en todo el mundo. Ha sido diseñado para brindarle muchos años de servicio confiable y control del clima con sólo tocar la pantalla. Funciones • Horarios programables de 7 días para una máxima comodidad y economía. • Programación desde su sillón: Sólo retire el termostato de la pared para ajustar los horarios.
RTH8500 Este termostato está listo para usar! El nuevo termostato viene preprogramado y listo para usar. Todo lo que tiene que hacer es ajustar la hora y el día. Luego verifique los siguientes ajustes y cámbielos si es necesario: 1. Ajuste la hora..............................................................................................Ver página 6 2. Seleccione el ajuste del ventilador: Predeterminado en Auto.............Ver página 7 3. Seleccione el ajuste del sistema: Predeterminado en Heat..........
Manual de Uso Referencia rápida de los controles Oprima el día o los días para ajustar el horario de programa (ver página 11) Oprima para seleccionar el funcionamiento del ventilador (ver página 7) Oprima para seleccionar el tipo de sistema (ver página 8) MON FAN AUTO TUE WED THU 70 Inside Set To Oprima para ajustar el horario de programa (ver página 11) Oprima para anular el horario de programa (ver páginas 12-14) SAT 70 Following Schedule SYSTEM HEAT FRI OK TO PICK MULTIPLE DAYS 6:01 SCHED
RTH8500 Referencia rápida de la pantalla Temperatura interior actual Día de la semana actual Ajuste de temperatura WED FAN Ajustes del ventilador AUTO 70 Inside Set To Ajustes del sistema Hora actual HEAT 70 Following Schedule SYSTEM Recovery 6:01 SCHED AM HOLD CLOCK SCREEN MORE Otros mensajes de pantalla: • Cool On: El sistema de refrigeración está activado • Heat On: El sistema de calefacción está activado • Aux Heat On: El sistema de calefacción auxiliar está activado Horario de
Manual de Uso WED Ajuste del reloj Inside FAN AUTO 70 Set To Oprima CLOCK 6:01 SCHED FAN AUTO 70 Para ajustar la hora actual en pantalla, oprima CLOCK, luego oprima s o t para ajustar la hora. Mantenga oprimido s o t para avanzar la hora con más rapidez. AM WED HOLD 70 Inside CLOCK SCREEN Set To Oprima DONE para guardar y salir (u oprima CANCEL para salir sin cambiar la hora).
RTH8500 Ajustes del ventilador Presione FAN (ventilador) para seleccionar la función de ventilador; luego, presione DONE (listo): WED FAN AUTO 70 Inside Set To Following Schedule SYSTEM HEAT 70 6:01 SCHED • On: El ventilador está siempre encendido. • Auto: El ventilador funciona sólo cuando el sistema de calefacción o de refrigeración está encendido.
Manual de Uso Ajustes del sistema Presione el botón SYSTEM (sistema) para realizar la selección; luego, presione DONE (listo): WED FAN AUTO 70 Inside SYSTEM HEAT 6:01 SCHED 70 • Heat: El termostato controla sólo el sistema de calefacción. Following Schedule • Cool: El termostato controla sólo el sistema de refrigeración. Set To AM HOLD CLOCK SCREEN MORE • Off: Los sistemas de calefacción y refrigeración están apagados.
RTH8500 Ahorre dinero con el ajuste de los horarios de programas Es sencillo programar su sistema para lograr un máximo ahorro de energía. Usted puede programar cuatro períodos por día, con distintos ajustes para días de semana y fines de semana. WAKE 6:00 am Ajuste de acuerdo a la hora en que se despierta y la temperatura que desea durante la mañana hasta que salga de su casa.
Manual de Uso Ajustes EnergyStar para un ahorro máximo de costos ® El termostato viene preajustado para usar los ajustes de programa EnergyStar . Recomendamos estos ajustes, dado que pueden reducir sus gastos de calefacción/ refrigeración hasta un 33%. (Ver la página siguiente para ajustar las horas y temperaturas para cada período).
FAN 70 Inside AUTO Set To 70 RTH8500 Para ajustar los horarios de programas Following Schedule WED FAN 6:00 70 Inside SCHED HOLD 6:00 Oprima EDIT DONE EDIT Seleccione día(s) MON FAN TUE Set To AM AUTO Oprima SCHED 70 CLOCK Following Schedule SCREEN MORE LEAVE RETURN AM WAKE SLEEP CANCEL Seleccione niveles de heat/cool WED THU FRI SAT SUN OK TO PICK MULTIPLE DAYS 70 AUTO HEAT CANCEL PERIOD 6:00 DONE WAKE 78 AM LEAVE RETURN SLEEP COOL 1.
Manual de Uso Anulación (temporaria) de horario de programas Ajuste la temperatura WED FAN AUTO 70 Inside Set To 73 La nueva temperatura se mantendrá hasta la hora que haya fijado. Cuando se cumpla el plazo, el horario de programa reanudará y ajustará la temperatura al nivel que haya programado para el período actual.
RTH8500 Anulación (permanente) de horario de programas Oprima HOLD Ajuste la temperatura WED FAN AUTO 70 Inside Set To Cualquier temperatura que fije se mantendrá 24 horas al día, hasta que la cambie manualmente, u oprima CANCEL (o SCHED) para cancelar “Hold” y reanude el horario de programas. 73 Heat On SYSTEM HEAT 8:00 Oprima HOLD para ajustar permanentemente la temperatura. Esto apagará el horario de programas.
Manual de Uso Suspensión por vacaciones Esta función puede suspender el horario de programas por largos períodos. 1. Fije la temperatura WED FAN AUTO 70 Inside Set To 55 Oprima s o t para fijar la temperatura que desea, luego oprima s o t para fijar la hora del día en que desea que se reanude el horario cuando usted regrese. Oprima HOLD dos veces, luego oprima s o t para seleccionar el número de días. SYSTEM HEAT Hold Temperature Until 6:00 SCHED PM HOLD CLOCK SCREEN MORE CANCEL WED 2.
RTH8500 Funciones especiales Cambio automático: Cuando el sistema se fija en Auto, el termostato selecciona automáticamente calefacción o refrigeración de acuerdo a la temperatura del interior. Smart Response® Technology: Permite que el termostato “aprenda” cuánto tiempo les lleva a la estufa y al acondicionador de aire alcanzar la temperatura programada, de modo que se alcance la temperatura a la hora fijada. Por ejemplo, fije la hora de levantarse a las 6 AM y la temperatura a 70°.
Manual de Uso WED Limpieza de pantalla FAN AUTO SCREEN LOCKED 70 Inside Set To Oprima SCREEN 6:00 SCHED 70 Following Schedule PM HOLD CLOCK SCREEN MORE Temporizador de bloqueo de pantalla (30 segundos) 30 OK TO CLEAN SCREEN Oprima SCREEN para bloquear la pantalla para limpiarla. La pantalla permanecerá bloqueada durante 30 segundos para que pueda limpiarla sin cambiar los ajustes.
RTH8500 Recordatorio de cambio de filtro de la estufa Oprima RESET después de cambiar el filtro. WED FAN AUTO SYSTEM HEAT CHANGE FILTER Inside 70 Set To 55 RESET 6:00 SCHED HOLD Si está activado durante la instalación, el recordatorio del filtro de la estufa le alerta cuando es hora de substituir su filtro. Oprima RESET después de cambiar el filtro, para recomenzar el contador de tiempo. Para cambiar el intervalo del recordatorio: PM 1. Oprima MORE, y después EDIT.
Manual de Uso Reemplazo de baterías Sujete el termostato y hale para separarlo de la placa de montaje Las baterías son opcionales (para brindar alimentación de respaldo) si el cableado de su termostato se instaló para funcionar con CA. Instale baterías nuevas inmediatamente cuando comience a titilar el aviso LO BATT. El aviso titila alrededor de 30 días antes de que las baterías estén agotadas.
RTH8500 En caso de dificultades Si usted tiene dificultades con su termostato, pruebe las sugerencias que figuran a continuación. La mayoría de los problemas se pueden solucionar rápida y fácilmente. Pantalla en blanco • • • • El botón en la derecha más baja de la pantalla está en blanco • Verifique el disyuntor y reinicie si es necesario. Asegúrese de que esté encendido el interruptor del sistema de calefacción y refrigeración. Asegúrese de que esté bien cerrada la puerta de la estufa.
Mode d’emploi En cas de difficultés No responde el sistema de calefacción o de refrigeración • Oprima SYSTEM para fijar en sistema en Calefacción. Asegúrese de que la temperatura de ajuste sea mayor que la temperatura interior. • Oprima SYSTEM para fijar en sistema en Refrigeración. Asegúrese de que la temperatura de ajuste sea menor que la temperatura interior. • Verifique el disyuntor y reinicie si es necesario.
RTH8500 Garantía limitada de un año Honeywell garantiza que, a excepción de la batería y en condiciones de uso y servicio normales, este producto no tendrá defectos de fabricación ni de materiales durante un (1) año a partir de la fecha de compra por parte del consumidor. Si durante ese período de garantía, el producto resulta defectuoso o tiene problemas de funcionamiento, Honeywell lo reparará o reemplazará (a criterio de Honeywell).
Sistemas para automatización y control Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 http://yourhome.honeywell.com Impreso en EE.UU: en papel reciclado con un contenido mínimo de 10% de fibras de papel posconsumo. ® Marca registrada en EE.UU. Copyright © 2007 Honeywell International Inc. Patente en EE.UU: Nº 6595430, D520,386 y otras patentes pendientes. 69-1901ES—1 Rev. M.S.