Owner's Manual
Table Of Contents
- User Guide
- Welcome
- Table of Contents
- Quick Reference
- Setting Up
- Installation
- Connecting to Wi-Fi Network
- Registering Online
- Setting Time / Date
- Setting the Fan
- Setting System Mode
- Preset Energy-Saving Schedules
- Adjusting Program Schedules
- Overriding Schedules
- Viewing Equipment Status
- Setting Vacation Hold
- Setting Holiday / Event Schedules
- Setting Custom Events
- Setting Holiday Schedule
- Setting Holidat Override
- Initiating Occupancy Mode
- Customizing Screen Color
- Setting Preferences
- Cleaning the Screen
- Adjusting Security Settings
- Software Updates
- unregistering Your Thermostat
- Smart Response Technology
- Pre-Occupancy Purge
- Compressor Protection
- Auto Changeover
- Setting Advanced Preferences
- Chaging System Setup
- FAQs
- Getting Help and Responding to Alerts
- Troubleshooting
- Glossary
- C Wire Addendum
- Quick Start Guide
- Wiring Labels
- Thermostat ID Card
- Warranty
Overriding schedules: home use
1 Touch
.6.
or
"f'
to adjust the
temperature (right side of screen)
and the Hold Until time. The schedule
will resume when the Hold Until time
expires.
2 Touch
Permanent
to keep the same
temperature until you change it or
resume the program schedule.
3 Touch
Cancel
Hold
at any time to
resume the program schedule.
Overriding schedules: business use
Touch
.6.
or
"f'
to adjust the temperature.
It will
be
maintained until the hold time
you
set.
•
To
change the hold time, touch the
Hold Until arrow buttons. This time can
be adjusted up to the maximum time
set on the Override Duration screen
in
Advanced Preferences (page 27).
• Touch
Override
to use a pre-set occupied
temperature if a person uses the room
during
an
unoccupied period. The new
temperature will
be
maintained for 1 hour
and can
be
adjusted up to the maximum
time set
on
the Override Duration screen
in
Advanced Preferences (page 27).
The programmed schedule will resume when
the override timer expires. Touch
Cancel
Hold
at any time to resume the program schedule.
18