Datasheet
6 www.honeywell.com/sensing
Photodarlington detectors provide non-linear, high gain analog output. Often used for
lower available light inputs, greater detecting distances, or when higher current output is
needed. Photodiode detectors offer very linear, high-speed analog output. Often used in
encoders and data transfer applications.
Infrared Sensors
Detectors: Photodarlington and Photodiode
Series SD1410(L)* SD2410 SD3410 SD5410 SDP8105 SDP8106 SD2420 SD5421 SDP8276 SD1420(L)* SMD2420
Type
photodarlington photodarlington photodarlington photodarlington photodarlington photodarlington photodiode photodiode photodiode photodiode photodiode
Package style
coaxial, leaded case miniature pill TO-46 flat window TO-46 dome lensed T1 side-detecting miniature pill TO-46, dome lensed side-detecting coaxial, leaded case
surface mount,
glass lens
Angular response
24° 48° 90° 12° 20° 50° 48° 18° 50° 24° 28°
Light current
minimum
0.6 mA 1 mA 0.6 mA 2 mA 0.5 mA 1 mA
7 mA 40 mA 4 mA 5 mA 6 mA
Reverse break-
down voltage
– – – – – – 50 V 75 V 50 V 50 V 50 V
Dark current
250 nA 250 nA 250 nA 250 nA 250 nA 250 nA 20 nA max. 20 nA max. 50 nA max. 5 nA max. 5 nA max.
Rise/fall time
75 ms typ. 75 ms typ. 75 ms typ. 75 ms typ. 75 ms typ. 75 ms typ.
50 ns 15 ns 50 ns 50 ns 20 ns
Mounting
configuration
through-hole through-hole through-hole through-hole through-hole through-hole through-hole through-hole through-hole through-hole SMT
Termination style
0,46 mm [0.018 in]
round leads
1,57 mm [0.062 in] hole
0,46 mm [0.018 in]
round leads
0,46 mm [0.018 in]
round leads
0,51 mm [0.020 in]
sq leads
0,51 mm [0.020 in]
sq leads
1,57 mm [0.062 in] hole
0,46 mm [0.018 in]
round leads
0,51 mm [0.020 in]
sq leads
0,46 mm [0.018 in]
round leads
SMT
Measurements
Ø 1,57 mm x 25,4 mm L
[Ø 0.062 in x 1.0 in L]
2,24 mm H x 1,57 mm W
x 3,18 mm L [0.088 in H x
0.062 in W x 0.125 in L]
Ø 5,56 mm x 12,70 mm L
[Ø 0.219 in x 0.50 in L]
Ø 4,06 mm x 17,77 mm L]
[Ø 0.160 in x 0.688 in L]
Ø 5,08 mm x 12,7 mm L
[Ø 0.20 in x 0.5 in L]
2,28 mm H x 4,45 mm
W x 18,43 mm L
[0.09 in H x 0.175 in W
x 0.725 in L]
2,24 mm H x 1,57 mm
W x 3,18 mm L [0.088
in H x 0.062 in W x
0.125 in L]
Ø 4,06 mm x 17,77 mm L
[Ø 0.160 in x 0.688
in L]
2,24 mm H x 1,57 mm
W x 3,18 mm L [0.088
in H x 0.062 in W x
0.125 in L]
Ø 1,57 mm x 25,4 mm L
[Ø 0.062 in x 1.0 in L]
2,54 mm H x 2,1 mm W
x 3,81 mm L
[0.10 in H x 0.083 in W
x 0.15 in L]
Features
higher typical output
currents; wide sensitivity
and temperature ranges;
mechanically and
spectrally matched to
SE1450 and SE1470
emitters
wide operating
temperature and
sensitivity ranges; can
be directly mounted to
pc-boards; mechanically
and spectrally matched
to SE2460 and SE2470
emitters
wide operating
temperature and
sensitivity ranges;
mechanically and
spectrally matched
to SE3450/5450,
SE2455/5455, and
SE3470/5470 emitters
wide operating
temperature and
sensitivity ranges;
mechanically and
spectrally matched
to SE3450/5450,
SE2455/5455, and
SE3470/5470 emitters
consistent optical
properties; mechanically
and spectrally matched
to SEP8505 and
SEP8705 emitters
mechanically and
spectrally matched to
SEP8506 and SEP8706
emitters
wide operating
temperature range; can
be directly mounted
on pc-boards;
mechanically and
spectrally matched to
SE2460 and SE2470
emitters
enhanced response
time; wide operating
temperature range;
mechanically and
spectrally matched
to SE3450/5450,
SE2455/5455, and
SE2470/5470 emitters
linear response;
enhanced response
time; internal visible
light rejection filter;
mechanically and
spectrally matched to
SEP8506 and SEP8706
emitters
wide operating
temperature range;
mechanically and
spectrally matched to
SD1420, SD1440, and
SD1410
robust ceramic
package with glass
lensed optics; upright
or inverted mounting
capability; compatible
with automated solder
processes; tape and reel
available
* Full lead length in the product photos of the SD1410(L) and SD1420(L) are not shown.