OptimusPDA SP5700 Series Quick Start Guide OptimusPDA SP5700 Series Quick Start Guide
OptimusPDA SP5700 Series Quick Start Guide Disclaimer Metrologic Instruments Inc., a wholly-owned subsidiary of Honeywell International Inc. (“Honeywell”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Honeywell to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Honeywell.
OptimusPDA SP5700 Series Quick Start Guide Box contents Protection Film Battery PDA Leather Case Stylus Pen/Hand Strap (Basic Items) Ear Phone (Optional Items) Parts of the PDA Speaker Operation Indicator (LED) Charging Indicator (LED) Touch Screen 4 Way Navigation Pad Ear Phone Jack Backlight Button Scan Button Power Button Keypad Microphone I/O Connector Soft Reset Button Battery Cover Lock Key Battery Cover Digital Camera (Optional) Stylus Pen Scanner (Type may vary ) Hand Strap Hole Scan
OptimusPDA SP5700 Series Quick Start Guide MiniSD Card and SIM Card Installation MiniSD Card Installation SIM Card Installation Insert MiniSD Card with label facing upwards. To remove, gently press the card into the socket to eject Open the battery cover and remove the paper labeled “UIM/SIM Card Slot Area” before inserting the SIM card. Battery Installation To install a battery, slide the battery cover lock to the open position. Remove the battery door and insert a new battery.
OptimusPDA SP5700 Series Quick Start Guide Charging the PDA Insert the handset into the cradle as shown below. To avoid damage to the charging connector do not force the PDA into the cradle. A spare battery can be inserted in the rear slot of both cradles and charged simultaneously.
OptimusPDA SP5700 Series Quick Start Guide Software/Hardware Reset Under certain circumstances a Software or Hardware reset may be needed to be performed on your PDA. The below tables explain how to perform a software or hardware reset. Software Reset Press Reset button on the rear of the PDA using the Stylus Pen Hardware Reset Reset Press Power button and Reset button simultaneously Reset Only use the Stylus Pen provided to press the Reset button. Using sharp objects may cause damage to the PDA.
OptimusPDA SP5700 Series Quick Start Guide Troubleshooting Problem PDA turns itself off Battery did not charge Fail to use WiFi Tapping the screen buttons or icons does not activate ActiveSync is not working No sound is audible A message appears stating that ‘Memory Full’ PDA does not accept scan input Cause Solution PDA is in Sleep Mode. PDA turns off after a period of inactivity. The period can be set in Settings-Power tab.
OptimusPDA SP5700 Series Quick Start Guide Patents This Honeywell product may be covered by, but not limited to, one or more of the following U.S. Patents: US Patent No.
Metrologic Instruments, Inc.
