Datasheet
000674-6-EN
August 2013
Copyright © 2013 Honeywell International Inc. All rights reserved.
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
sensing.honeywell.com
SMART Position Sensor
WARRANTY
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgement
or consult your local sales office for specic warranty details. If
warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items it nds defective. The foregoing is buyer’s
sole remedy and is in lieu of all warranties, expressed or
implied, including those of merchantability and tness for a
particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
SALES AND SERVICE
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgement
or consult your local sales office for specic warranty details. If
warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items it nds defective. The foregoing is buyer’s
sole remedy and is in lieu of all warranties, expressed or
implied, including those of merchantability and tness for a
particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
Order Guide
Catalog Listing Description
SPS-L035-LATS
SPS Series SMART Position Sensor, 35 mm linear conguration, 0 mm to 35 mm [0 in to 1.38 in] sensing
range, 0.5 Vdc to 4.5 Vdc analog output, magnet actuator included (sensor also available separately)
SPS-L075-HALS
SPS Series SMART Position Sensor, 75 mm linear conguration, 0 mm to 75 mm [0 in to 2.95 in] sensing
range, 0 Vdc to 5 Vdc analog output, magnet actuator included
SPS-L225-HALS
SPS Series SMART Position Sensor, 225 mm linear conguration, 0 mm to 225 mm [0 in to 8.86 in] sensing
range, 0 Vdc to 5 Vdc analog output, magnet actuator included
SPS-L225-HDLS
SPS Series SMART Position Sensor, 225 mm linear conguration, 0 mm to 225 mm [0 in to 8.86 in] sensing
range, RS232-type digital output with 57.6 kbits/s baud rate, magnet actuator included
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this datasheet is for reference
only. DO NOT USE this document as product installation
information.
• Complete installation, operation and maintenance information
is provided in the instructions supplied with each product.
Failure to comply with these instructions could result in
death or serious injury.