Datasheet

000676-4-EN IL50 GLO Printed in USA

October 2010

Order Guide

Catalog Listing

Description

SPS-L075-HALS

SMART Position Sensor, 75 mm linear configuration, 0 mm to 75 mm [0 in to 3.0 in] sensing range,

0 Vdc to 5 Vdc analog output, magnet actuator included

SPS-L225-HALS

SMART Position Sensor, 225 mm linear configuration, 0 mm to 225 mm [0 in to 8.86 in] sensing range,

0 Vdc to 5 Vdc analog output, magnet actuator included

SPS-L225-HDLS

SMART Position Sensor, 225 mm linear configuration, 0 mm to 225 mm [0 in to 8.86 in] sensing range,

RS232-type digital output with 57.6 kbits/s baud rate, magnet actuator included

Note: Contact Honeywell for alternative allowable magnet orientations.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s

standard product warranty applies unless agreed to otherwise

by Honeywell in writing; please refer to your order

acknowledgement or consult your local sales office for specific

warranty details. If warranted goods are returned to Honeywell

during the period of coverage, Honeywell will repair or replace,

at its option, without charge those items it finds defective. The

foregoing is buyer’s sole remedy and is in lieu of all other

warranties, expressed or implied, including those of

merchantability and fitness for a particular purpose. In no

event shall Honeywell be liable for consequential, special,

or indirect damages.

While we provide application assistance personally, through

our literature and the Honeywell web site, it is up to the

customer to determine the suitability of the product in the

application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this

printing. However, we assume no responsibility for its use.