Datasheet

Hall Effect Products
Surface Mount Sensors
SS5 Serie
s
2 Honeywell • Sensing and Control For application help: call 1-800-537-6945
ABSOLUTE MAXIMUM RATINGS
Catalog Listing SS51T SS500
Supply Voltage -28 to +28 VDC -1 to +30 VDC
Voltage externally
applied to output
+28 VDC max. (OFF
condition only)
-0.5 VDC min. (OFF or ON
condition)
+30 VDC max. (OFF
condition only)
Output ON Current 20 mA max. 50 mA max.
Temperature Limits
Operating -40 to +150°C (-40 to
+302°F)
-50 to +160°C (-46 to
+320°F)
Storage
-40 to +150°C (-40 to
+302°F)
-65 to +160°C (-54 to
+320°F
Magnetic Flux No limit. Circuit cannot be
damaged by magnetic
overdrive.
No limit. Circuit cannot be
damaged by magnetic
overdrive.
Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the operations section for extended
periods of time may affect reliability.
OPERATING CHARACTERISTICS
SS51T SS500 Remarks
Supply Voltage 4.5 to 24 VDC 3.8 to 30 VDC
Current Consumption (Ioff) 10 mA 10 mA Max over temp
Output Voltage (operated) 0.4 V 0.4 V Sinking 20 mA
max.
Output Current (operated) 20 mA 20mA
Output Leakage Current
10 µA10µA
Output Switching Time
Rise, 10 to 90%
Fall, 90 to 10%
1.5 µs
1.5 µs
1.5 µs
1.5 µs
V
CC
= 12 V,
R
L
= 1.6 K Ohm,
C
L
= 20 pF
WIRING DIAGRAMS
Operating Temperature; °C -40 to +150°C -40 to +150°C