User Guide

3 63-2604
• Auxiliary subbase contact typically
interface with a Honeywell Economizer
System (for total rooftop control
integration) or act as dehumidification
output.
Features Available via PDA
Configuration
• 365 day clock with holiday programming.
• Automatic Daylight Saving Time
adjustments.
• Selectable dehumidification limit control.
• Modulating output configuration.
• Occupancy input to control standby
setpoint.
• Additional standby period used in low
traffic areas.
• Sequential start option.
• Discharge air high/low limits.
• Selectable recovery ramp.
• Ambient lockout (with outdoor sensor).
SETTINGS
Using Thermostat Keys
The thermostat keys are used to:
• set current time and day,
• program times and setpoints for heating and
cooling,
• override the program temperatures,
• display present setting,
• set system and fan operation,
• perform simple configuration.
NOTE: See Fig. 1 for keypad information.
Setting Temperature
Refer to Table 1 for default temperature
setpoints. See Programming section for
complete instructions on changing these.