Brochure

Built-In Control
Some controllers require you to piece together separate modules
to get the control features you want, and those added relays can,
well, add up. So can the added LCD display, an added transformer
module and more. The Honeywell T775 Electronic Standalone
Controller puts an end to add-on costs. All the features you need for
a variety of applications are built right into the T775, including the
LCD display. You won’t have to worry about having the right modules
in stock or needing to piece them together. The T775 has it all.
It’s All Inside
Easy-To-Use Graphical Interface — Operating the new T775 is
as easy as operating your cell phone. The easy-to-use, intuitive
programming will save you time on every job.
Internal Time Clock Scheduler — The Setback and Disable Output
options, controlled by the built-in scheduler or digital input, will help
save energy during unoccupied times and give you more control of
the equipment without needing to purchase an additional time clock.
Up To Two Independent Modulating Outputs — Each output can be
individually configured for 0-10 Vdc, 2-10 Vdc, 4-20 mA or Series 90,
so a single device can handle many field requirements to save you
time selecting the right control for the job.
NEMA 4X Enclosure Option — Certain models are offered with
NEMA 4X enclosures to protect them from water and corrosion.
They can be installed in animal confinement areas, green houses,
washdown areas, swimming pools and other similar locations,
giving you the control you need for harsh locations.
Modulating High Or Low Limit Control — If you need to protect your
coil from freezing or your equipment from overheating, models
offering this feature give you the ability to adjust your control
temperature at sensor A to protect equipment at sensor B. You get
consistent control while still protecting your equipment.
Optional Configurable Integral And Derivative Times — Standard on
every device, this feature delivers pinpoint control. PI or PID control
on modulating outputs is set up by default to behave just like the
previous T775 Series 1000, but now you can adjust reaction times
and behavior, giving you more control.
Reset Models With Simplified Setup — Reset programming has
never been easier. Simply enter the high and low control temperatures
and the corresponding high and low outdoor temperatures, and
you’re done. As your outside temperature gets colder, the setpoint
temperature automatically adjusts to save energy.
Configurable Minimum Off Time — If needed, setting a minimum
off time can protect equipment and reduce the need for a separate
time delay device.
Sensor Calibration — Calibrate input sensors up to +/-10° F. This
can be used to compensate for resistance drops in wire leads, to
offset the input temperature for sensor location and more.
Fewer Models — Fourteen T775 models replace 38 Series 1000
models, so you’ll reduce inventory and eliminate the headache of
trying to choose the right model.
Special Models
Several T775 models are designed to ensure your control needs
can still be met with a single unit for special applications.
Universal Model To Control Pressure, Humidity Or Temperature —
The T775U Universal model has an easy setup for configuring
control of pressure or humidity with a 0-5Vdc, 0-10 Vdc or 4-20
mA input. Control humidity with % RH displayed, CO2 with
ppm displayed, or control pressure with in. w.c., psi, Pa, or kPa
displayed. Outputs include two modulating and two relay outputs
that can each have their own setpoint. The T775U even offers the
ability to reset the output based on outdoor temperature — handy
when you need to reduce window condensation when setting
humidity levels. With the T775U, you’ll enjoy complete versatility
in a single control that gives you the freedom to do what the job
requires.
Special Sequencing Model For Staging Up To 12 Relays With Up To
Two Setpoints — The sequencer model has four stages, plus you
can add up to two optional 4-stage expansion relay modules for 8- or
12-stage operation. The flexible setup allows you to configure these
stages for heating, cooling or both. Because sequencer models
operate up to 12 stages, you can control multiple low-mass boilers,
chillers, electric heat and other equipment from a single controller.
Special Boiler Model — The T775 boiler model offers features
including dedicated pump output, staging for up to 12 relays, digital
output alarm, pump exercise, pump pre-purge and post-purge,
warm weather shut-down, built-in scheduler, displayed run time,
equal run time, first-on, first-off and more. With a single control,
you can handle multi-boiler applications. The T775 boiler model
can be used on chillers as well.
With The T775, You’ll Know You Have Exactly What You
Need, Because All The Features Are Self-Contained