Install Instructions

T775P SERIES 2000 CONTROLLER 1. SETUP
62-0256–03 16
Fig. 30. Setup - Outputs - Schedule.
1.3.2. SCHEDULE
1. From the Outputs menu, use the Sand T buttons
to highlight SCHEDULE.
2. Press the X button to display the value.
3. Use the S and T buttons to select YES or NO.
Default: NO
4. Press the X button to accept the value and display
the Outputs menu.
• Selecting NO disables scheduling for all outputs
(stages).
• Selecting YES enables scheduling for the setpoint.
With Scheduling enabled, when you return to Program
mode, the new option for Scheduling displays. You can
press the HOME button and then the MENU button to
view the Schedule options in the menu.
Fig. 31. Setup - Outputs - Options Menu.
1.3.3. OPTIONS
1. From the Outputs menu, use the Sand T buttons
to highlight OPTIONS.
2. Press the X button to display the Options menu.
Fig. 32. Setup - Outputs - Options - Reset.
1.3.3.1. RESET
1. From the Options menu, use the Sand T buttons
to highlight RESET.
2. Press the X button to display the value.
Default: NO
3. Use the S and T buttons to select the value.
4. Press the X button to accept the value and display
the Options menu.
If you select NO, then No Reset is configured.
SETUP
OUTPUTS
SCHEDULE
SETUP
OUTPUTS
SCHEDULE
USE
SCHEDULE
FOR BOILER
STAGES
YES
NO
M24657
SETUP
OUTPUTS
OPTIONS
SETUP
OUTPUTS
OPTIONS
RESET
INTEGRAL
DERIVATIV
ON DELAY
OFF DELAY
WWSD
LEAD LAG
DI OPTS
SHOW RT
EXIT
M24658
SETUP
OUTPUTS
OPTIONS
RESET
SETUP
OUTPUTS
OPTIONS
RESET
USE RESET
FOR
STAGES
YES-BOILER
YES-OTHER
NO
M24659