Install Instructions
Table Of Contents
T775R SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLER
25 62-0249—05
Fig. 61. Setup - Outputs - Mod Out - Reset.
3.3.3.1.6. RESET
This selection enables the controller’s Reset function, and
allows each output to be individually programmed for
Reset or No Reset.
IMPORTANT
To use the Reset function of the controller, the
first output (MOD1 or Relay 1 depending on the
model) must be set for Reset here.
The RESET choice is offered for all outputs in setup
mode, and you can set any or all of them for Reset=YES
or Reset=NO. The default is Reset=NO.
For the remaining outputs, if Reset=YES, then these
outputs use the reset curve programmed for the first
output.
1. From the Mod menu, use the S and T buttons to
highlight RESET.
2. Use the S and T buttons to highlight the desired
value.
Default: NO
3. Press the X button to accept the selection and
return to the Mod menu.
3.3.3.1.7. Exit Modulating Outputs Setup
Press the W button (or highlight EXIT and press the X
button) to exit the Mod menu and return to the Outputs
menu.
If you have a second modulating output to configure, go to
“3.3.3.1. Setting up the Modulating Outputs” on page 23.
If you are finished setting up the modulating outputs,
continue with “3.3.4. NBR OF RELAYS”.
Fig. 62. Setup - Outputs - Number of Relays.
3.3.4. NBR OF RELAYS
1. From the Outputs menu, use the Sand T buttons
to highlight # RELAYS.
2. Press the X button to display the number of relays.
3. Use the S and T buttons to display the number
from 1 to 4 depending on the model. (See note
below).
4. Press the X button to accept the value and display
the Outputs menu.
NOTES:
a. The T775R models have the following outputs
available:
T775R2001up to 4 relay outputs
T775R2019up to 4 relay outputs
T775R2027up to 2 relay outputs
T775R2035up to 2 relay outputs
T775R2043no relay outputs
b. The number of relays entered here display on the
home screen.
SETUP
OUTPUTS
RELAY 1
MOD 1
SETUP
OUTPUTS
MOD 1
RESET
USE
RESET
FOR
MOD1
YES-BOILER
YES-OTHER
NO
M24340
SETUP
OUTPUTS
# RELAYS
ENTER
NUMBER OF
RELAYS
SETUP
OUTPUTS
# RELAYS
4
M24342