Brochure

Features and Benefits
• Comprehensive Features. Internal
temperature and humidity sensors,
3 universal inputs, 6 binary outputs, 2 analog
outputs, 19 factory-loaded applications.
• Wireless Operation, Low-Key Profile.
Optional embedded wireless receiver
communicates with wireless door and
occupancy sensors to deliver flexible
installation options.
• Connected. A building management front
end granting access to remote and local
troubleshooting for a more efficient service
diagnosis.
• Versatile Design, Intuitive Interface. Fully
configurable, stand-alone or integrated
operation, and a sleek, sophisticated design
with configurable, touch screen display.
• Powerful, Flexible Control. Easily
configured through a step-by-step,
Niagara-based configuration wizard. Modes
of operation allow control based on
occupancy or schedules.
• Compliant. BACnet-compliant on MS/TP
and meets increasingly stringent energy-
saving building codes.
0100059 | PM | 06/16
© 2016 All Rights Reserved Honeywell Inc.
For more information
18004663993
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
buildingcontrols.honeywell.com
Honeywell’s BACnet FF is
a BACnet communicating
sensor-controller combination
that targets common controls
applications such as roof top
units, fan coil units and heat
pumps. An optional, integrated
wireless receiver enables the use
of passive infrared (PIR) and door/
window sensors to better control zones based on occupancy
while saving you the cost of extra wiring.
The configurable BACnet FF comes with 19 preloaded
applications, providing you with customized, occupancy-based
sensing in a single solution that saves time, money and energy.
These applications are configured using an easy-to-use,
Niagara-based configuration wizard to seamlessly perform
advanced setups across multiple devices all at once.
The integration into the Niagara architecture will also allow for
all the benefits of using a connected solution, such as proactive
mechanical and energy analytics. This enables the BACnet FF
to fit a variety of vertical market needs.
ITEM NUMBER
TB3026B
TB3026BW
50037735001
50037736001
DESCRIPTION
BACnet Fixed Function thermostat with 3 universal inputs, 2 analog outputs, 6 relay outputs and 19
factory-loaded applications. W model includes a built-in wireless receiver.
Wireless door/window sensor.
Wireless passive infrared (PIR) motion sensor.
Ordering Information
A powerful BACnet-based controller with a large, integral touchscreen, occupancy-based temperature,
humidity sensing and an optional on-board wireless receiver, the BACnet FF is a flexible solution for
energy savings and maximum room coverage.
BACnet
®
Fixed Function Thermostat