Instruction Manual

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
EN 3
Louver
Movement
POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between | - || - |||.
SWING
Press the SWING button until is illuminated on the display. The louvers will
begin to move left to right automatically. You can manually adjust the louvers to
change vertical air flow.
COOL
You must add water before operating the unit in Cool mode. Press the button until is
illuminated on the display screen. The water pump will operate and you will feel the cooler air after
the Honeycomb Cooling Media is completely wet.