Barometric Weather Forecaster User Manual

and maintenance.

We recommend cleaning the remote sensor periodically, as the dirt and debris

may affect sensor accuracy.

PRODUCT OVERVIEW

REMOTE TEMPERATURE & HUMIDITY SENSOR

FEATURES

• Remote data transmission to the main unit via 433 MHz frequency

• LCD displays temperature, humidity and channel

• Selection of the temperature display in Celsius or Fahrenheit

• Three (3) transmission channels selection

• Case can be wall mounted using built-in hanger

A. LED INDICATOR

• Flashes once when the remote sensor transmits a reading to the main

unit.

• Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

• Holds two AA-size batteries

C. RESET

• Resets all previous settings

D. CHANNEL SWITCH

• Selects the desired channel -1,2 or 3

E. WALL-MOUNT RECESSED OPENING

• Keeps the remote sensor on the wall

F. °C/°F SWITCH

• Selects the temperature display in Fahrenheit or Celsius

NOTE: Install the batteries; select the channel and temperature in °C or °F

before mounting the sensor.

BATTERY INSTALLATION

• Remove the screws from the battery compartment with a small Phillips

screwdriver.

• Set the channel 1 through 3. The switch is located in the battery

compartment. Channel 1 is typically selected if only one remote sensor

is being used.

• Install 2 “AA” size alkaline batteries (not included) matching the

polarities shown in the battery compartment.

• Select the temperature unit in °F or °C by pressing °C/°F switch with a

paper clip or similar tool

• Replace the battery compartment door and secure the screws.

• Secure the remote sensor in the desired location.

MOUNTING

• The remote thermo-hygrometer sensor can be placed on the flat

surface or mounted on the wall in vertical position

• Use the wall mount hardware and screws when mounting the

thermo-hygrometer sensor on the wall

PLACEMENT

• The remote thermo-hygrometer sensor should be placed in the area