Complete Wireless Weather Station User Manual

• Make sure that the remote sensors are easily accessible for cleaning and maintenance.

Note: When the temperature falls below freezing, the outdoor sensor batteries may have reduced voltage and a reduced

effective range. We recommend using lithium batteries at temperatures below 32°F (0°C).

IMPORTANT

: We recommend cleaning the remote sensors periodically, as dirt and debris affects sensor accuracy.

Thermo-Hygrometer Sensors TS33C

FEATURES

• LCD display of measured temperature and humidity

• Remote data transmission to the main unit via 433 MHz signal

• 328 feet (100 meters) transmission range without interference

• Three (3) transmission channels selection

• Case can be wall mounted using built-in hanger

A. LED INDICATOR

• Flashes once when the remote sensor transmits a reading to the main unit.

• Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

Holds two AA-size batteries

C. RESET

Resets all readings (requires small paper clip.)

D. CHANNEL SWITCH

Selects the desired sensor channel from 1 to 3

E. WALL-MOUNT RECESSED OPENING

Keeps the remote sensor on the wall

Note: Install the batteries and select the channel before mounting the sensor

Battery installation

• Remove the screws from the battery compartment with a small Phillips screwdriver.

• Set the channel 1 through 3. The switch is located in the battery compartment.